P
PrintablesPeter Sassaman
CHP-170 Flush Cutter Gridfinity
Holder for CHP-170 to go in Gridfinity sorting system. Credit to Zach Freedman for the Gridfinity System:
- Downloads
- 311
- Likes
- 41
- Rating
- 4.33
All models
Counting matching models…
P
PrintablesPeter Sassaman
Axial Resistor Organizer
Made an organizing for 1/4 Watt axial resistors. Inspired by this very cool smt resistor organizer: http://aidetek.com/mm5/merchant.mvc?Screen=PROD&Store_Code=A&Product_Code=BOXALL&Category_Code=Encl
- Downloads
- 144
- Likes
- 20
- Rating
- 0
P
PrintablesPeter Sassaman
Raspberry Pi 5 (RPI5) Stereo Camera and IMU Case (Open Source 6DOF Tracker Project)
Case for Raspberry Pi 5 for adding two INNO MAKER MIPI 7251 RAW Cameras Edit: been having issues getting the 7251 to run so will be trying the OV9281 instead which should have better support. and a Adafruit 9-DOF Absolute Orientation IMU…
- Downloads
- 67
- Likes
- 12
- Rating
- 0
P
PrintablesPeter Sassaman
RJ45 / Ethernet Breakout Mount For Nema 17 Stepper Motors.
1. Print with 0.4 mm nozzle (Tried 0.8 but didn't work very well for this model). Can print vertically with a brim for holding down. Support isn't really needed when printed vertically. 2. Screw onto the back of a Nema 17 Stepper Motor 3.…
- Downloads
- 60
- Likes
- 13
- Rating
- 0
P
PrintablesPeter Sassaman
Metric Leather Punch Set (1-10mm)
Printed 50% infill out of PETG. Would love to try printing it in brass fill but probably won't because that would be pricy lol. Fusion 360 link https://a360.co/3fWu8tF if you want to remix.
- Downloads
- 57
- Likes
- 15
- Rating
- 0
P
PrintablesPeter Sassaman
Pixel 8 Camera Privacy Cover
Just a simple cover for Pixel 8 cameras. Please keep in mind this will likely only work if you are using the same phone case as I am.
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
PrintablesPeter Sassaman
Nightmare Fuel Pongo
Nightmare Fuel Pongo SNL Inspired
- Downloads
- 40
- Likes
- 1
- Rating
- 3.5
P
PrintablesPeter Sassaman
Bamboo Skewer Sharpener
Need an M2 Heat set insert and M2 screw along with a pencil sharpener blade. Fusion Link: https://a360.co/3tYsbVP
- Downloads
- 37
- Likes
- 7
- Rating
- 0
P
PrintablesPeter Sassaman
1/2" EMT Curtain Rod Ends For Doorways
Made some curtain rod ends for the doorway of my office. Uses 1/2" EMT for the rod and 1/8" screws to connect to wall. Included the DXF I made while making it in case that is helpful, and put a PDF too with about the right spacing from…
- Downloads
- 35
- Likes
- 9
- Rating
- 0
P
PrintablesPeter Sassaman
The Joe Holder (Fits Hamburgers Too)
Use to hold Sloppy Joe and Hamburgers. Print in PETG Print instructions print in PETG
- Downloads
- 32
- Likes
- 4
- Rating
- 0
P
PrintablesPeter Sassaman
Variable Direction Vent Prototype
Kinda Like what is above seats in a plane.
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesPeter Sassaman
Replacement Drip Irrigation Stake
I had bought this kit: https://www.amazon.com/dp/B0CY2G9SYN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1 last year. However, I lost some of the stakes when tearing down at the end of the year. I am going on a trip this year so I am…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesPeter Sassaman
Omni Directional Treadmill ( Roller Transfer Bearings )
This is mostly a concept design. I have not printed it on my XL yet. If you print this please be smart and wear PPE! Helmet, Knee Pads, Elbow Pads, etc. Also, probably print it at like 50% infill with plenty of shells. Idea is this would…
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesPeter Sassaman
Harbor Freight Adapter for Disposable Painters Mask (DO NOT TRUST! USE AT OWN RISK!)
(DO NOT TRUST! USE AT OWN RISK!) So I have been a bit frustrated that Harbor freight masks are disposable unless you but like the premium one that actually lets you switch between the P95 filter + OV cartridge and the P100 filter.…
- Downloads
- 11
- Likes
- 3
- Rating
- 0
P
PrintablesPeter Sassaman
Temporary Post Motor Filter Tray for a Bissel Vacuum Cleaner
Needed a replacement tray for my post motor filter on my Bissel vacuum cleaner. I have a new one on order. However, in the interim I modeled and 3D printed one out of PETG (PLA would probably melt). Used some Polyurethane foam for a…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesPeter Sassaman
Magnetic Stir Base
A Magnetic Stir Base that is based around the GBM4008-150T motor. Need the following: GBM4008-150T motor. (use included screws) 2x 14mm diameter be 10 mm magnets. A half size 6 inch deep steam pan. A speed controller such as…
- Downloads
- 8
- Likes
- 0
- Rating
- 0
P
PrintablesPeter Sassaman
Halloween Gasha / Gacha Candy Dispenser
Created a candy dispenser for halloween that dispenses 2" gachapon balls with candy inside. The design may still need work Had to add extra plastic around the melt in insert to make sure it worked properly on the geared motor I used. Also…
- Downloads
- 5
- Likes
- 3
- Rating
- 0
These are all currently available results.