Counting matching models…
Here's a video further explaining and demonstrating the tool: An adjustable router plane, inspired by the one designed by Paul Sellers, but can accept a chisel for the cutter, and with ergonomics similar to the Veritas large router plane.…
A fully 3d printed marking gauge. Takes a pencil or blade. One handed operation. A video showing how to assemble this, and how it works is here: I printed this in PETG The main body and the beam were printed with .3mm layer height 2 or…
Protractor made with all printed parts, no supports. The numbers and graduations are raised, ideal for 2 colour prints. I did mine by performing a colour change for the last two layers. I found similar models both here and on Thingiverse,…
This version adds all the improvements in V2 ( https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support ) Assembly instructions, apart from the added fasteners are all the same for this version, and is…
Updated version of my fractal bench dog clamp . STEP file also included for those who want to make adjustments. After watching a restoration video by Hand Tool Rescue of a fractal vise ( https://youtu.be/QBeOgGt_oWU ), I was fascinated by…
Update: new option for an infinitely adjustable moving jaw added! no need for the series of holes. The version included only works with a nominal 1x3" (actual dimensions 0.75inx2.5in- 19mmx60mm) Model files for this jaw are included in…
A hanger for any flat hand tool such as saws, squares and straight edges. I printed mine from PETG which is a bit slippery for the mechanism to grip things. I solved this with a wrap of electrical tape around the roller. You could print…
This is a 3d printable sash clamp. Long clamps are expensive, this is a low cost alternative, the length is limited only by the length of the wood board used as the bar. The width of the board to use is 3/4" or 19mm. This clamp uses 1/2"…
Eggbeater Drill - fully 3d printed - no supports. This was my first version of the tool, I've had two more iterations since: https://www.printables.com/model/193985-eggbeater-drill-version-2-fully-printed-no-support…
A two piece print which slides together with a tapered dovetail for a snug fit. Just screw the base in place, and slide the hook into the mating dovetail. The taper should allow some forgiveness on print accuracy.
This is a simple enclosure designed to mount a button or switch. It is inspired by the typical style of industrial 22mm push button enclosures, but scaled down for a smaller button size. It is sized to fit M12 panel mount style switches.…
I wanted to fletch some heavy 1/2" diameter crossbow bolts of approximate medieval design. Having no goose feathers on hand, I figured a 3d printed one could be a decent alternative. Upon searching I found a cool idea by Tal84:…
This part was designed to replace a picture hanger and nail that my key hook hangs on. The hanger always pivoted when the weight wasn't balanced and was easy to knock off the nail. This design will fit snugly, fixing that issue. The…
After watching a restoration video by Hand Tool Rescue of a fractal vise ( https://youtu.be/QBeOgGt\_oWU ), I was fascinated by the mechanism, it lets you clamp curved or irregular objects. I didn't find anything similar when I searched…
Eggbeater Drill - fully 3d printed - no supports. Assembly instruction video here: https://youtu.be/LRMtJGYOVTI Just a demo of it in action here: This new version has an added idler gear, which allows for a bit more torque than the…
A groove plane for cutting a groove near the edge of a board, for retaining box or drawer bottoms. Designed to use 6mm x 6mm HSS cutter bit. Cuts a groove ¼" deep ¼" from the edge. The main version uses a 1/8" x 1/2" flat bar for the…
This is a small weather shield I created for an outdoor temperature/RH/barometric pressure sensor. Prints without supports (upside down). The mounting is designed to fit a common breakout board style used for the BME 280 sensor, though…
Printed in two halves, glued together, with transparent plastic window and printed photo of a real camera inside. A quick and dirty design, but looks convincing enough up in a tree. STEP files added for customizing/remixing/
A robust clamp with a swivel foot. This is based off the same idea as my earlier sash clamp design https://www.printables.com/model/59250-sash-clamp but is just a one piece body, no wood required. I wanted it for keeping boards aligned…
A saw handle, with nice traditional style ergonomic grip printed in3 pieces, no supports. Video here: The design was made to fit ¼-20 bolts and nuts, with a bolt pattern corresponding to a Stanely general purpose 20-086 18" hand saw.…
The micro switch is affixed to the base using M2 or #2-56 screws, the holes are sized so that the bolts should self tap. Any length a few mm more than the width of the switch should work, I had really long ~15mm long ones on hand and made…
Video description/demo: A wagon vise designed to be installed in laminated construction lumber bench top. I did all prints in PETG with 5 perimeters and 15% infill. The screw assembly uses an aluminum ½" square bar to provide…
fully printable planing stop designed to be screwed to the end of a workbench. The parts fit together snugly. The textured face with the dovetails required a screw clamp to press into place.
This is a clip on belt sheath for an 8mm(5/16") diameter ferrocerium rod fire starter (a.k.a. a ferro rod or fire steel). I wanted it to be as convenient and secure as my knife sheath, but since I wear the knife more often than I'm in the…
0 This is a jig that clamps onto the tail board making it easy to align it square and to the right depth on the pin board when marking out tails. It is an alternative to a shallow rabbet or painters tape shown in Rob Cosman's method.…
Remix of @Projunk's Parametric V-Blocks, specifically the T style. I scaled the model up, added chamfers and fillets, plus countersinks for the screw mounts.
I needed a tray to hold whiteboard markers, cleaner and an eraser. Searching didn't turn up any one thing that did all I wanted, so I created one. This was designed to mount with hidden fasteners, the back of the tray has a tapered…
Simple perforated cylindrical stand that allows a carboy to be set on it inverted, without the top of the carboy touching the floor/sink. The perforations are intended to allow drying. It is intended to be printed upside down, that way…
Simple printable cleats to hang bench planes on vertical, or inclined surfaces. My method for mounting is to attache the bottom cleat first, then take the plane and slide it up so it will just clear this bottom cleat. Keeping the plane in…
Demo video here: This dovetail saw model uses a printed spine which holds the saw plate and a steel rod for stiffness and weight, making it balance like a traditional back saw would. My version uses a ½" steel rod which can be bought at…
The plastic handles that fit over the 30mm tubing on my wheelbarrow required replacing. These were designed with a 2.5mm oversized ID to allow for adhesive and irregularities in the rusted tubing surface. I used ASA which is supposed to…
A cable grommet to fit a 65mm (2.5") hole. There are many of these on this site already, but none were quite what I was looking for. Rather than scaling one of those, I designed this one. Print Settings Printer: any Rafts: No…
This is a design of a front knob for a #4 or #5 hand plane. I based the proportions on the knob on my type 19 #5. This version has enough clearance for a 1/4-20 bolt, I had to replace the original Stanley threaded part, and the 7/32"-20…
This is a design to replace the broken original safety key for a "free spirit" treadmill, by dyaco. It has been tested to work perfectly. I printed this from PETG, though PLA would give more faithful detail, I expect the PETG to stand up…
A bracket to create a dipole antenna using 1/2" (5/8" (16mm) actual OD) copper pipe, would work with EMT also. Designed to be bolted together will work with M4 bolts, or #10-24, or #10-32 bolts. The hole in the main body was sized for a…
File Handle - London pattern fits Bahco 7" Regular Saw-Sharpening file. Because the tang on these files are a tapered hex, it is very likely that this handle will fit a number of other files by Bahco and others, but I have no others to…
Two different styles of celtic knots to be used as stencils for quilting.
File Handle - London pattern fits Bahco Needle Saw-Sharpening File. Unlike larger files made by Bahco and other brands, the tang has no taper or hex shape. It is a simple round tang. To retain it I incorporated an M3 captured nut/bolt…
Bar Clamp Pad - forPower Fist brand clamps, the ones that came with the clamp fell off, these snap in place snugly with a satisfying click. Designed to fit these clamps:…
A small mallet in a traditional joiners mallet style, where the handle locks into the head with a taper fit. My printer is set to slightly overextrude, and this fit perfectly for me. If your printer is tuned for tolerances tighter than…
A case with a tapered press fit cover and screw mounting for a xl6009 dc-dc boost converter board. Either M3 or #4-40 will self tap into the mounting holes for the board. The lid is a tapered press fit. I didn't include mechanical strain…
My mother had borrowed a wooden pastry tamper, apparently turned on a lathe. I made measurements of this and duplicated it for 3d printing a replica. Apparently the copy works as well as the original. While designing and printing this I…
This is a handle designed to fit the tang of an Estwing hammer. The one I designed it for was their drywall hammer. I have the leather handled claw hammer as well, and that one is a bit shorter, so some scaling may be required to fit to a…
A replacement knob for the rotary style piezo igniter on RV/Caravan stoves. The original had an odd arrangement of offset edges that engaged with “teeth” on the shaft of the igniter. The edges of the original had worn down and stopped…
A stand to fit a ~10" tablet in portrait or landscape. Made with extra space to accommodate thick cases. I printed this one in PETG with 3 perimeters but 2 would probably work just fine. PLA would suffice quite well also.
This part was created to hold an 18mm diameter rod, which I am using to support wire spools. I designed it to be shallow so that the rod can be easily lifted out. It could also work for holding a curtain rod, or hangar rod in a closet.
A chamfer sled, attaches to sole of plane with magnets. Easily adjustable with threaded knobs. To set the chamfer size turn the knobs toward one another or apart to adjust the gap. I used 8mm x 3mm magnets, mine press fit, but you may…
A case for a 20A 300W CC CV Step Down Module regulator with openings for heat sinks and access holes for voltage and current adjustments. Tapered press fit cover. A comment indicated that their board had slightly different screw hole…
I have been building nest boxes for various birds this spring and thought it would be cool to 3d print one. I found a proven design that was based on 3 inch (75mm) PVC pipe which was intended for chickadees and nuthatches. Here's a link…
This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…
My sealed light fixtures with Glass shades/diffusers were cooking my LED light bulbs, severely shortening their lifespan. I designed this one to be closed enough to shade/diffuse the light, but open enough to allow free airflow, keeping…
The small intake strainer was clogged frequently with debris, this part fits over to pre-filter. Our Fluval canister filter (406? I think) had an intake strainer with an OD of ~28mm. This strainer was designed with a tapered ID for a…
There are a large number of cases for the various versions of the LCR tester on this site already, but I couldn't find one that fit what I wanted. This version is a simple design, with rounded edges, which is screwed together, and can be…
This is a cover to protect a wireless doorbell. The doorbell instructions said "do not expose to direct rain". This cover is not waterproof, but has some space at the bottom and drain holes, so it should provide a sufficient layer of…
This jack is intended to take the place of fold down casters. It is made to work with fixed casters mounted to the equipment, this lifts the machine taking the weight off the fixed casters, and immobilizes it. The centre pivot and cam…
Where I live growler lids are not accepted for recycling. One evening I sat enjoying my beer while playing with a lid, and thinking about some way of reusing it. The first thing I came up with was this waterproof case, which is just a…
Update: An improved design can be found here: https://www.prusaprinters.org/prints/33136-helical-rainradiation-shield-for-weather-sensors-w This model is also on Thingiverse, and has continued to get downloaded almost as frequently as the…
Printable feet for making Roubo style winding sticks, traditional hand tools to gauge flatness and straightness of boards. Since these are an old french design, I added a fleur-de-lis for extra flair. The STL has a hole to accept an…
I have a commercial feeder where the cover is retained by the hanger, I took that concept and combined it with the design concept by welwell( https://www.thingiverse.com/thing:181885 ), where the feeder uses 1/4" (6mm) wire mesh (AKA…
The foot on the Sigma Contemporary 150-600 is too small to serve as a comfortable handle to carry this lens. This extension fixes that. I carry my camera when hiking, I find it more comfortable than using a strap. When I upgraded to this…
I designed this case to house an ozone generator module found on ebay, sold as "ionizers" or air purifier modules. The model I purchased runs from 12Vdc I designed the case to take a barrel power connector (8mm od). The holes are designed…
Lots of these boards are available to boost lower voltages, or regulate down to lower. Sometimes it's convenient to wire them inline with a cable. Print a pair of these to form a full case. I designed this quick print which I use with hot…
A weather shield to cover entryway keypad. Where I live we get frequent freezing rain, and crusty blowing snow. This cover should ensure I'm not locked out by the elements. Affixed with 8mm magnets. Two versions are provided, one with…
A cam mechanism that screws to the leg of a bench or tool stand and accepts 3/8" threaded stem casters. Printed in PETG using 5 perimeters for the cam and feet, 6 or 7 perimeters for the linear guide and plunger. This is designed to use a…
This is a simple sheath for the hatchet end of an Estwing drywall hammer. prints without supports, and retains nicely. I made mine in PETG. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: any PETG Category: Hand…
This was designed to replace a broken glass vase designed to hang on a 3mm (1/8") diameter wire hook. I also included a version with a broader flat base so that it could be used freestanding.
Mount Arm for Ubiquiti NanoStation LocoM5 with a ±8° of tilt adjustment. The sleeve in this design is a loose fit over the arm. If mounting outdoors, this might need to be affixed with adhesive, or a screw. The sleeve allows about 10°…
Crevasse tool for aquarium siphon. Fits over the nominal 50mm tube of the siphon so you can clean in the corners. Prints without supports. Note you should start the siphon and attach this under water, if you try and fill the siphon tube…
A 3d printable marking gauge that uses a Veritas wheel gauge blade ~$6CAD. here is a link to the blade I used:…
The upper and lower blade guides are identical on this vintage -circa 1950 bandsaw, replacements are difficult to find, and the design would be a little tricky to machine, so I made a printable one. I made this one in PETG and I used a…
The Keen Kutter block plane has 1/4"-20 threads this knob has a hex recess to accept a bolt head. The recess is slightly tapered, so a press fit might work for you depending on the tuning of your printer. If it is loose, or for extra…
This is a replacement lens for an "Acorn Porch Light" found on some RVs. The one I copied was from a Denali super lite by Coachman. The shape was tricky to model and needed to be split into pieces to make it printable. I didn't bother…
Jakejake's design works great! In order to free up my quick release plate, to leave it on my DSLR, I made this remix to add a plate to his design. I have two tripods, with different heads that fit this version which has an integral quick…
These are all currently available results.
