Counting matching models…
Some parts for more flexibility for your arm. Tilt base (a base where you can rotate your arm arount) use with the elbow joint elbow joint, for fun angles shorter arms if you don't need that far reach. and a gripper to hold a small probe…
I was searching for a cheap trombone stand for my son he could leave at his school and would not have to carry with him all the time. We used a wooden dowel 20mm for the stem and for the legs. you will need : 3x lover cap 1x upper cap 1x…
simple speedy stitcher like awl tool for sewing. this design uses an interchangeable standard sewing machine needle you can change for the job at hand. there is no internal bobbin as with other designs because I only use this for short…
This is an antiroll cage suited for the Shure GLXD2 wireless handset. With my printer the part slid up snugly right above the switch and sits there secure without any further fixation. Dependent on you printer/Slicer setup your result…
Just did a quick patch because I wanted to mount the holder with adesive tape. so I closed the screw hole (you can drill it open from the back if needed) and made a notch in the back to compensate for the thick tape I used. Probably a…
My first try on a cookie cutter, you can freely adjust the whole size of the cutter and also the settings for the indents. currently my first succesfull try was only with playdoh, real thing ongoing -- updated version, now it can be…
I was looking to build a nutcracker for the upcoming season. Quickly I decided for the screw type (less prone to "overcracking" the nut) Target object should be walnuts. I wanted the cup to be closed at one end in order to catch the finer…
I needed a diffusor for the LED lantern lightning for my kids. I placed a 14000mcd yellow LED inside and it looks great. the bottom hole fits for a 5mm LED with a shrink tube Print Settings Printer: uArm Swift pro Rafts: Doesn't Matter…
With the additional clamp you can hold a screw in place to cut it, the long set screw can be used if you need to cut several to the same length, minimal screw length is around 12mm. I added a thin sheet metal in order to protect the PLA…
I modified the original to use it with a carpenters pencil about 15x7mm dimesion. additionally you need the spring from the original design. I recomment beveling the corners of the spring to make insertion easier, I managed to get down to…
Quick hack to the original design: My Changes: adopted countersink for metric countersink (45° slope) indented screw hole by 1mm to be able to put a cap on generate a cap for the screw hole, the cap is placed beside the invader. (I did…
mixed the customizeable Fan Guard with the open Hardware logo if you don't mind my messy SCAD code you can tweak around. The .stl is for a 80mm fan UPDATE 2018-06-21: I am having trouble slicing this thing with cura 3.3.1 it is generating…
I split the model in two halfes to be able to print it on my mini. for alignment of the two halfes 3mm dowels (or M3 screws) are used. the gcode is for 0.6mm nozzle
as the dart crashed the first time not only the mount for the front Dampers broke but also the part supporting it (10450) broke. So I gave it a shot with scad. I was able to make the part fit but its far from perfect. Print Settings…
Mount to hold the nut in order to mount the boffer of the Tern GSD Gen1 Kickstand Buffer
I needed a container to hold our monthly public transport ticket. this tickets here are simply printed on thin paper, so if you share it within the family it should better be protected. I had some 0.8mm thick PVC film wich I cut to size.…
I saw the Universal Spool and directly had to print one, even without the need of having one. Simply the mechanics were too nice, with the snaplock and opening tool. But the solution of putting the clip simply under a ziptie... well I…
These are all currently available results.
