Counting matching models…
These are mounts for MikroTik Switches CSS610-8G-2S+ and CRS305-1G-4S+. The rack ears for the CSS610-8G-2S+ are the same as those for the CRS310-1G-5S-4S+ in my previous mod . The other parts seen in the photos are from NatalieT's project…
I had some problems with my MK4 crashing when I printed at high(er) temperatures in my Original Prusa Enclosure, see attached photos of the display screen shortly after the crash(es). I watched the temperatures of the board (accessible…
I created mounts for Natalie T 's Modular 10 Inch Server Rack to mount MikroTik hAP ax³ and CRS310-1G-5S-4S+. The Mikrotik hAP ax³ uses a transparent base for the body of the access point that allows the device to be mounted horizontally…
I printed some of the boxes of the original model but wanted something bigger and scaling the original model up to use the whole bed size of an MK3/MK4 would distort the pattern and also use a lot of filament. So I decided to use the look…
This is a bracket for mounting the BIGTREETECH BTT Octopus printer control board onto metal DIN rail clips like these here: https://de.aliexpress.com/item/32971006389.html The intended purpose of this is for mounting the Octopus board in…
Sensor Case with Presence Detection, CO2 Meter, Lux and Climate There are several sensor boards with multiple functions, but no one sensor has all functions on one board. That is why there still is a CCS811 CO2 eCO2 TVOC sensor in the…
This is a bracket for mounting a Meanwell PSU RS 25-5 power supply unit onto metal DIN rail clips like these here: https://de.aliexpress.com/item/32971006389.html Screws you need: 2 x M4x6mm 2 x M3x6mm Print Settings Printer Brand: Prusa…
This is a bracket for mounting the BIGTREETECH BTT Octopus printer control board onto metal DIN rail clips like these here: https://de.aliexpress.com/item/32971006389.html The intended purpose of this is for mounting the Octopus board in…
This is a turntable and a stand for the motorized panorama motion controller Syrp Genie Mini. You can use this turntable to shoot stills, videos or animations of your objects, use it for 3D scanning etc. Be careful with the threads on the…
I used the step file from the original model to adapt it to fit the PiCamera V3 module as well as the Arducam 16MP module. I also lifted the camera position by 40 mm, because I did not want the frame extrusions under the print bed in the…
These are snap-on mounts for attaching camera accessories to the legs of a Peak Design Travel Tripod. I often use a powerbank and a wifi pocket-router to connect my phone or tablet to my cameras for remote control on macro shots or…
I have been using these very reliable spoolholders by ea69 for a few years now and always wanted to have one for 2kg Prusa spools. I used the step file and made the stand and the threaded shaft 40 mm wider. I did not know the parameters…
This is a mount for a ZFC39 PWM fan controller board inside a computer case. I was building a NAS system with an old computer and the mainboard only has PWM control for the CPU fan, not for the fans inside the case. So I went for this…
After watching a video describing a sensor for reading the ir pulses from an electronic energy meter "eHZ Generation K" from EMH metering, I designed this mount for the ir sensor module of type TRCT5000. Link to the video by "Tristan's…
This mount is for this LED rear bike light with brake indicator from Fischer. The light runs on battery and has an accelerometer to turn on more LEDs when you hit the brakes. Cars and other bike riders keep more distance to you with this…
This is an evolution of my previous mod . I created a mount for a ZimaBoard with a dual-port NIC and two SSDs attached to install a firewall with PFsense or OPNsense. Because the network ports of the MikroTik HAP are on the back, it was…
I imported the original STL into Fusion 360, took some measurements, adjusted the sizes for the case of the TW4, which is a bit smaller than previous models. I also made the hole for the USB plug a bit smaller to get a press-fit. I had to…
This key fits on the square of the water refill valve on a Vaillant gas boiler atmoTEC Plus. Makes opening and closing the refill valve easier without the need for pliers or wrenches. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
This is a remix of the original with a base that contains both the LED controller MCU and a Meanwell PSU RS-25-5. Externally you only need a cable with a switch. The bottom and top part of the base are connected with heat inserts and M3…
The headlight on my Brompton is not bright enough if I drive in the dark on non-illuminated bike paths. So I created this adjustable mount for my flashlight, which has a diameter of 27 mm. I wanted the beam of the light to be adjustable…
This is a bracket to mount a Pi4 in an aluminum Armor Case on the Original Prusa Enclosure. You need: 1 spare M3 nut that will go into the center of the bracket 1 spare screw M3x8 to attach the bracket 4 screws M2.5x22 to attach the Armor…
This is a tray for this tap set: https://www.amazon.de/Fortag-Titanium-Coated-Ratchet-Adjustable/dp/B01M638GUN It came in a plastic bag, so I created a tray for it. It is good enough for me, I printed the first prototype and all the…
I know this is overkill for most purposes, but when did that ever stop anyone? :-) My enclosure build is still a WIP and I wanted to use the equipment I already have for the time being and not buy some other, perhaps more affordable stuff…
I have a ZOVHYYA Battery Air Pump that I carry in my bike packing bag. That is the name of the device on Amazon. I have seen similar looking pumps with different color schemes on other platforms. The membrane switches for the LED light…
I scaled the step file from the original project in Fusion to fit the Snapmaker U1 build plates, removed the indents for the stand, added 5 attachment hexagons for HSW. The "insert-empty.stl"part is from this project, which gave me the…
These are all currently available results.
