Counting matching models…
I was not satisfied using a Chinese made jig for drilling door hinges (35mm diameter holes) due to the size and options I don't need. Keeping its principle I change it to accommodate needs of an average woodworking enthusiastic. Printed…
This was made as an inspiration by the Wooden Handmade Pawfect Carving items of yukondesignstudio.com. The originals items are wooden sculptures. I printed it with PLA, 20% infil @ speed mode.
The Y shape Tap has an exact thread for common soda bottles (Pepsi, Cola and many others). Printing is easy and supports are not required. Printing : All together there are 4 items to print. It is suggested to print the Bottlecap (the Y…
Yet popular items around the house and it seems that many variations can be found but I wanted to add a nice item to honor the flag by using an addition the Pole, see the Flag Pole Top Part. Flag Pole Holder and Flag Pole Top part, both…
One can use the following 3 parameters to define the requested lidded box size: BoxOuterLength - Min 40mm BoxOuterWidth - Min 38mm BoxHeight - Min 35mm While the minimum values are presented - the maximum values are limited by the printer…
Printed using ePLA. use support as already planned in the attached bgcode file or use your own.
The carrying container is designed for 6 bottles with a diameter of 63 mm max and a height of 25 cm. The carrier is made of PLA (+) and and has of 5 parts: Please note the attached gcode files for best results as for supports on the Top…
Mr benoitmeunier brilliant design, see https://www.prusaprinters.org/prints/59583 was very near to my needs in keeping my Sanding Paper handy. Thanks again to benoitmeunier for his kind suggestion to plan it for my needs as the paper size…
Attached are STL and BGCODE files (PLA)
Z Shape Handle for Push Stick. A safety device used mainly in conjunction with operating a table saw in woodworking shops. It provides a better safe distance between the operator's hands and the saw. Print instructions Generic PLA, 0.20…
Due to the challenging oval section structure I had to use support (Support on build plate only). The grill is about 147 mm Dia , the grid holes are 2mm Dia each. I used PETG in the very low Tip temperature range, so to ease the removal…
Oranges (as well as Lemons, Citrus, etc.) Squeezer. PLA made, tested and found functioning well. As for PLA, avoid dishwasher and / or hot water when cleaning. Get your daily Fruit and keep healthy. Enjoy Print instructions Printed using…
Built for 20mm Diameter hole matrix. Top outer Diameter is 25 mm. The Anchor method Dog provides precision and strong attachment to the work surface. Easy insertion and removal by using a 5 mm Allen key. Made out of 3 parts. I used PLA…
Planned for low pressure. Printed using ePLA. Use support as already included in the attached bgcode file or use your own.
Nice for servicing Cold food, Cakes etc., Built it using PLA @ 15% Infill and 0.15mm Quality and set the support to: Everywhere. Attached are GCODE and STL files. Made of 2 parts, Left and Right. For hardware I used: One M4X20 Pan Head…
Normally I would print it with 40%, PLA material and at least 0.15mm quality.
This Flag Double Pole Holder will be very useful on many occasions and for good reasons, e.g. Coronation, Independence Day, 4th of July, Fête nationale, etc. PETG is a good choice, No support is required.
This device is made out of two parts, BASE and HOOD. I printed it using PLA but you may use other materials as well. I designed it to meet pipes of 100 mm outer diameter. The HOOD is fast glued to the BASE. After both parts are glued the…
Had to replace a spoke handle that failed in my lathe. Have ordered an original replacement but meanwhile replaced the failed one with this model. The Wheel mid center hole thread is M12x1.75 and the Handle thread is M8x1.25 STL was good…
Use flex material for best results. Although 1" inner diameter is used here, use your Slicer to choose your own preferable size (X, Y, Z)
“Fire Ants”, see SOLENOPSIS under en.m.wikipedia.org. These ants are particularly stingy, tiny in size and reproduce quickly especially in early summer. It is advisable to use a known / your choice bait material but of course keep the…
Printed using ePLA. use support as in the attached bgcode or use your own.
Printing using ASA is preferred, however it can be printed using PLA if the item is not exposed to UV. I could certainly use one of the Clamp On Framing and Fitting Series 9578T… by Mc Master-Carr see…
Yet another approach to save space for spices. The structure is strong enough to hold about 10 “regular” spice cans. STL 0.2mm Speed mode had good printing results and. NO SUPPORT is required - see the attached Section Analysis image.…
When using in a controlled environment PLA is fair enough. Use two 10-24 headless screws to secure the pipes.
Printed using ePLA. Support is required as already planned under the attached bgcode file, or use your own. Threads are NPT type.
The device consists of two printable items: Nozzle: This one in a print in place item that includes a spherical ball with a path for the filament in a way that this ball can freely move inside a dedicated cover. The filament is routed…
Did it from PETG. 02, 20% infill As this item should withstand marine environment I wish I could use Nylon instead.
This will help you to easy identify your keys. PLA, print it with the flat face down. 0.15mm @ Quality mode. No support is required.
One may change dimensions, while tooth number is constant all other dimensions can be modified (use scale in your slicer and pay attention to the Z) . To learn more abut other gear model structure and properties you will be amazed by the…
Usually they are made of metal. I found it practical to try it using with ASA and it seems that in low torque values up to 50 ounce-force-inches this module is functioning good enough for my needs. So, I printed it using ASA (in a closed…
I was impressed by the Torii gates shape during my last visit to Japan. Torii gates represent the border between the secular world and the sacred worlds of the Shinto religion (Japan). I added the “TORII” name in Japanese on the handle…
Its professional internal structure provides a rigid tool and simple assembly procedure. I made it using PLA. Scale can be modified to your printer spec. Three parts to print: Handle, Left Head and Right Head. Before gluing, check that…
I got good results by using PET. 15% infill 0.2mm speed
A wooden handle is always preferred by woodworkers for their tools, a replacement printed one is suggested as a fair replacement. STL is a good choice. Use support.
Designed for Portable charger 10,000 mAh Power Bank by Miracase. (Suitable for Charger within 145mm L X 73.5 mm W X 14.80 mm Thk.) Printed using PLA 0.15 mm thk at speed mode. I used the “automatic support” . clean and easy.
An auxiliary handle for walking cane users that aims to support them when standing up. Useful and common among those recovering from or with physiological limitations, as well as the elderly. The Handle assembly consists of two (2)…
These are all currently available results.
