Counting matching models…
UPDATE: (29/01/26) There is a totally new (re-worked / re-made) Mk.2 version available now. I have made 3 versions: a standard 70mm maker (like this one), a 70mm Duo version (make 2 at a time), and a 90mm Large version. Go to my main page…
This is a remix of kasey3dsparks - Fire Marker on thingiverse. https://www.thingiverse.com/thing:2578260 I have added a different base, lowered the flame into the base and resized the whole model to 20x20x26mm The idea is to use these 3D…
UPDATE: - ( 26/12/22) In the pictures I have used Ziro PLA Pro Basic Color Series Green for my final prints.This is a 3D replacement stairs token for Cthulhu: Death May Die. You will need to print 2 of these for the game. I have remixed…
Update: - (0 4/01/23) NEW v2 Files: I have added a wooden textured floor to the door bases and hinges to both the open doors. You will find these as v2 files which now gives you a total of 6 different doors. I designed these doors after…
I have re-mixed these bookshelves, cupboard and secret passages from thingiverse here: Bookshelves/Cupboard: https://www.thingiverse.com/thing:1974174 Secret Passages: https://www.thingiverse.com/thing:5679446 These were made for Mansions…
This is my second mould for use in the kitchen. I felt I needed a Ravioli maker / mould after my intial creation of the Dumpling maker / mould available here: https://www.printables.com/model/656020-dumpling-maker-mould-updated-1212123…
I re-mixed these 2 barricade tokens from Thingiverse here: Barricade 1: https://www.thingiverse.com/thing:3615933 Barricade 2: https://www.thingiverse.com/thing:3644315 I have made a textured floorboard base for each and re-sized them to…
This is a 3D replacement tunnel/corridor token for Cthulhu: Death May Die. You will need to print 2 of these for the game. I have remixed this from changeagent - Iphone Speaker Tunnel on thingiverse https://www.thingiverse.com/thing:59872…
I have designed and printed 2 sets of wall tokens for Mansions of Madness (12 in total). This is the second set of 6 which comprises solely of brick walls . Just choose whichever you want (or all of them, why not?). Each wall has a code…
Update: (02/02/25) Thanks to @3DFlex_579298 There was a mistake found with the v3 stl model. I have rectified this fault and uploaded v4 of the model, to replace v3. Please let me know if you find any other faults with any files. I saw…
Update: (23/08/26) I have added a solid (not hollow) fire token for resin (SLA) printers - Any problems with it, please let me know. Update: (13/09/24) Thanks to push2flush I have just added a token that I had missed… The Directional…
My wife wanted some glasses holders made for her, that she could stick on the cupboard wall in our bedroom, so that she wouldn't keep losing them. This is what I have designed and made here. I used 2 strips of double sided foam tape…
This is my Dumpling Maker MK.2 which is a total re-work / re-make of my original Dumpling Maker . They all print in place as a single print (with no need for supports). I have included 2 Dumpling pastry cutters here too (a standard sized…
I designed this from an old ring-pull can opener in our kitchen draw. I only used vague dimensions from the original, as I wanted it to be able to open larger cans if needed. So the shape and dimensions are different, but it still works…
I have designed and created this set of 5 opaque wall window tokens to replace the cardboard ones in the Mansions of Madness game. There is also a seperate set of solid wall windows that I have created in case you prefer to paint on a…
UPDATE: (10/09/24) I have improved the walls in the vault room and have now included 3 different sizes: The original size I uploaded: 80mmx80mm tile size (92mmx92mm overall size) / 100mmx100mm tile size (112mmx112mm overall size) /…
I have designed and printed 2 sets of wall tokens for Mansions of Madness (12 in total). This is the first set of 6 which comprises solely of smooth walls . Just choose whichever you want (or all of them, why not?). Each wall has a code…
This is a Dumpling Pastry Cutter specifically made for my Dumpling Maker / Mould which can be found here: https://www.printables.com/model/656020-dumpling-maker-mould But can also be used just as a 75mm pastry cutter. It is 8mm deep and…
I originally designed this for my Kreg pocket hole screws that I use for DIY. There are 2 versions included depending on how far in your screws are in the hole. Use the LONG version if possible as the standard version or the SHORT version…
UPDATE: (21/09/24) I have added another 3 different types of funnel. Funnel 7 is a wider spout version of Funnel 1 and Funnel 9 is Funnel 7 but with a taller top opening, meaning you can fill it better and quicker. Funnel 8 is similar to…
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
These stl files are for the game Cthulhu: Death May Die and it's expansions/seasons. I created this wound holder and counters to put on non-investigators (ie Cultists, Monsters and Elder-Ones). If the Cultist, Monster or Elder-One get a…
This is an on-going expansion of tokens for the Mansions of Madness board game. I will keep adding to this upload as and when I have completed the models. Do you want to be able to sell any or ALL of my prints shown here on…
I created these as replacement tokens for the cardboard versions in the board game: Aliens Another Glorious Day In The Corps. Do you want to be able to sell any or ALL of my prints shown here on Printables.com? If so, then click on the…
I have designed and created this set of 5 solid wall window tokens to replace the cardboard ones in the Mansions of Madness game. There is also a seperate set of opaque wall windows that I have created in case you prefer a see-through…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is ONLY for build plates that can print 250mm or larger…
I had printed my frame lock tiles on a textured bed so they didn't turn very well when trying to lock them. So… I decided to create a spanner for not only the frame locks, but the playtile locks too. There is one handle and the 2 types of…
These stl files are for the game Cthulhu: Death May Die and it's expansions/seasons. I created this fire token holder for the 3D fire token counters I have also created. I thought it was about time to make a token holder tray/box for my…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
This is a burger press for making your own beefburgers, hamburgers, sausage burgers, etc. There are 3 sizes included. Standard (1/8 pounder), ¼ pounder and ½ pounder which are achievable by using different sized base plates (all marked on…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
This is a complete set of 3D hedgerows for Zombicide Green Horde. ALL 9 tiles (V side only) have had their hedgerows modelled in 3D for a more enhanced game. PLEASE NOTE: This set is a set that have been designed for smaller build plates.…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
I have designed and printed 2 sets of wall corners for Mansions of Madness and other games (18 in total). This idea was given to me by RaptorSLegacY who wanted some wall corners designed to create a completely walled room. This is the…
I designed this from an old ring-pull can opener in our kitchen draw. I only used vague dimensions from the original, as I wanted it to be able to open larger cans if needed. So the shape and dimensions are different, but it still works…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
These are 2 various fortifications for use with Mantic Games Armada. The rules for them can be found in the 'Seas Aflame' book/pdf. I have no photos for physical prints currently, as I have run out of filament and will not be getting any…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
I have designed and printed 2 sets of wall corners for Mansions of Madness and other games (18 in total). This idea was given to me by RaptorSLegacY who wanted some wall corners designed to create a completely walled room. This is the…
UPDATE: (26/10/23) The doors were not showing on the printed files, so I have adjusted them and uploaded replacement files/renders. I have also updated the print instructions for a better print. These are 2 various fortifications for use…
I had made all of the Star Trek Ascendancy box organizers for the game thanks to westph21 on thingiverse https://www.thingiverse.com/thing:4386391 However the new expansions are not supported and despite another maker on thingiverse…
These are 4 various emplacement fortifications (Size M / M 30x30mm) for use with Mantic Games Armada. The rules for them can be found in the 'Seas Aflame' book/pdf. I have no photos for physical prints currently, as I have run out of…
Mantic Games have made their 3D printable island terrain available in their MMF Campaign of 3D printed models. I looked at the pictures and was underwhelmed at what they would look like, so I started designing my own by looking at the…
These are 4 various fortifications for use with Mantic Games Armada. The rules for them can be found in the 'Seas Aflame' book/pdf. I have no photos for physical prints currently, as I have run out of filament and will not be getting any…
This is a set of movement trays for Warcradle's Armoured Clash. Each tray has a front section marked with an ‘O’ for the Officer model (base). This has been designed as the optimum position for the Offier model which aligns with the rule…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: - ( 20/12/22) If these are printed upright the support comes off very easy but… They can snap off if you hit a curb hard because of the straight layer lines. To counteract this I suggest printing them on their side on a raft with…
This is a Marvel gravestone Display stand that I created to hold the Stan Lee Memorial print by Hex3D. https://www.printables.com/model/1439-stan-lee-memorial-print/ There is a recess to hold the bust and it can either be placed on a…
I have a lot of A5 clear document wallets I use for putting in addresses for things I sell on eBay. I needed a holder and thought I would design and print one. Originally I had planned for storing them flat but I made a silly error on the…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
UPDATE: (12/11/23) A lot of prints using the built in tab system work, but can cause other parts of the model to lift. Therefore I have decided to replace them with tabless models because of this. You can still use brims, rafts, Cura…
This is a set of movement trays (with handles) for Warcradle's Armoured Clash. Each tray has a front section marked with an ‘O’ for the Officer model (base). This has been designed as the optimum position for the Offier model which aligns…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (C) is the end you put into the hole. The Angled End (A), the "L" Shaped End (L), and the Blade End (B) is the end that holds the shelf. Four pegs are needed for each shelf that you…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
There are 3 types with variable lengths. The Beveled End (C) is the end you put into the hole. The Angled End (A), the "L" Shaped End (L), and the Blade End (B) is the end that holds the shelf. Four pegs are needed for each shelf that you…
There are 3 types with variable lengths. The Beveled End (B) is the end you put into the hole. The Flat End (F) and the Round End (R) is the end that holds the shelf. (You can also have the Beveled End (B) as the end that holds the shelf…
I first came upon this idea when I had to pass some things up to my wife in our loft / attic. I was originally just throwing up bags, when I thought there must be an easier and quicker method. TA... DA.. The adjustable pole attachments…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These boxes come in…
I created these ship markers after seeing someone online using a dice to mark where a ship was that needed to be moved in order for the turnkey to be used, because he had 2 ships next to each other. It is based on the same principle as…
These are (Single) Tiny ship bases for the Orc, Basilean, Empire of Dust, Trident Realm and Twilight Kin - (Other fleets may be made at a later date - Time permitting as they are very time consuming to design believe it or not). This idea…
These stl files are for the game Mansions of Madness and it's expansions. I created this fire token holder for the 3D fire token counters I have also created. I thought it was about time to make an alternative Mansions of Madness lid for…
This is a 3D model of the Character ‘Mr. Bobo’ from the YouTube channel ‘Learn with Mr. Bobo’ which can be found here: https://www.youtube.com/@mrbobosongs The character was originally designed by my wife and I re-created the character as…
My wife bought 2 plastic hanging vines for our bedroom but I wasn't sure how to hang them up. That's why I designed a small vase for them. You simply screw it to the wall/cupboard then slide the stem of the top of the vine inside and let…
UPDATE: - (0 8/01/23) I noticed some artifacts showing out of the back so I have changed the model slightly to remove them. A Cthulhu themed and inspired business card holder. Has a slot on the back for a single business card or…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These boxes come in…
I first came upon this idea when I had to pass some things up to my wife in our loft / attic. I was originally just throwing up bags, when I thought there must be an easier and quicker method. TA... DA.. The adjustable pole attachments…
This is an ‘almost’ full set of tokens for Warcradle's Armoured Clash (Damage tokens to come in set 2). This set includes 2 versions… The first version (Set 1a) is a ‘standard’ set of tokens which have a flatter surface and are easier to…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These hinged box lids…
This is a 3D model of the ‘TigerTone’ Character from Tigerpaw Designs. I/He has a YouTube channel which can be found here: https://www.youtube.com/@tigerpawdesigns The character was originally designed by myself and I re-created the…
This is the 2nd set of tokens for Warcradle's Armoured Clash. This set includes all of the Damage Tokens in both single files and grouped sets, along with a ‘complete’ set which is the same as the printed cardboard set (only these ones…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These boxes come in…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These hinged box lids…
This is the version 2 of my stackable box (SB) system. In order to use the lids , hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These fixed box lids…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These hinged box lids…
These are 3D versions of the cardboard tokens for Aldarra. The ‘explored’ token has the same size circumference as the cardboard token, but is taller (as it is 3D). I have also created a very simple set of ‘order’ and ‘victory point’…
This is an ‘almost’ full set of tokens for Warcradle's Armoured Clash (Damage tokens to come in set 2). This set includes 2 versions… The first version (Set 1a) is a ‘standard’ set of tokens which have a flatter surface and are easier to…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These dividers come in…
UPDATE: (15/02/25) I have added 2 new smaller sized Racks ('Paint Rod Rack 18' and 'Paint Rod Rack 26') and 2 new ship paint rod lengths ('Ship Paint Rod 75' and ‘Ship Paint Rod 100’). These should help take up less space and give…
This is the version 2 of my stackable box (SB) system. In order to use the lids , hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These fixed box lids…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These dividers come in…
This is the version 2 of my stackable box (SB) system. In order to use the lids , hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These fixed box lids…
This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system. These dividers come in…
This is a player board to hold the cards and large faction sheet (or ships instead). gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the cards and…
This is a player board to hold the cards, ships, outposts, fortresses and plastic order tokens. gaminggeek241 (from youtube) https://www.youtube.com/@gaminggeek241 has requested someone to try to make a compact version that holds all the…
This is a set of (Large Horizontal) movement trays (with handles) for Warcradle's Armoured Clash. Each tray has a front section marked with an ‘O’ for the Officer model (base). This has been designed as the optimum position for the Offier…
These are all currently available results.
