Counting matching models…
This is the small variation of the holder. Designed for small items. Print instructions Prusa i3MK3s 0.2 20% Infill Printed on the side without supports.
Turtle for deco, key chain, wall, ... Print instructions A little turtle, about 100 x 90 x 4 mm. Sliced in Slic3r. Layer change at 2.15 by 100%. No rafts, no supports, printed with 20 % infill, resolution: 0.15.
This is a remix from "Nintendo Switch Lite Charging Dock" by TechnoGeek3D ( https://www.thingiverse.com/thing:3920260 ). Made it wider and extended the plug hole. You will need some supports for the plug hole. (Last picture shows the…
This bathroom arranger is a remix of this one: https://www.thingiverse.com/thing:2144322. (It was published before I had my own acc.) It has deeper holes for holding and also more things to hold. This holder is without the 'Tooth Brush…
This is a Lid for the "Angel Tea Light" by gzumwalt ( https://www.thingiverse.com/thing:1864269 ). I have made two of them, one for 100 % scale, other for 130%. Printed the Angel Tea Light in 130 percent but I missed the lid. It fits an…
I have remixed the switch part. Have made the third pillar taller and made on the matching part a hole for keeping it better in place. In the picture you see in purple the original parts (not in the files included). The yellow parts in…
Designed some coasters. Have fun.
Someone asked for a wider case holder for the DS games. I don't have DS games, therefore I don't know if it fits. Please let me know, if it fits. Thank you.
Because I've always found it difficult to see which text size is printable, I've developed a small test for it. The size of the numbers corresponds to their font size, d. H. 2px = 2; 4px = 4, ... This test shows you how your printer…
This is the multicolor print. Have fun.
Needed it for the used games, which didn't have the game case. Fits in the slots of Nintendo 3DS Game Box Case Holder ( https://www.prusaprinters.org/prints/4812-nintendo-3ds-game-box-case-holder ). (Pictures shows also the cartridge for…
Because I've always found it difficult to see which text size is printable, I've developed a small test for it. The size of the numbers corresponds to their font size, d. H. 2px = 2; 4px = 4, ... This test shows you how your printer…
Because I've always found it difficult to see which text size is printable, I've developed a small test for it. The size of the numbers corresponds to their font size, d. H. 2px = 2; 4px = 4, ... This test shows you how your printer…
This is the single color version with separate prints. You print the body and the hearts separate, then glue the heats in the coaster. Print instructions For the hearts I set the "Elephant foot compensation" to 0.2 mm. (The tolerance…
Size: 190 mm x 150 mm x 3 mm. The butterflies and letters are extruded above (see picture). First the print is printing three colors together, then two colors. Filament black: Polyalchemy other Filament: MakerGeeks I have also uploaded a…
This is a single print with layer change. Have fun.
This is just the light for the Forbidden Watchtower by kijai. I created a cylindrical light to put it in the tower, so that it has the look of the illuminated tower. The Tower you find here: https://www.thingiverse.com/thing:2574499 . I…
A coaster with pumpkin motive for multicolor print.
It was a pity that some space was lost in previous cartridge ( https://www.prusaprinters.org/prints/4813-cartridge-for-3ds-games-ds-games ). Designed a double decker for the used games without game case. Cartridge fits in the slots of…
A coaster with a pumpkin motive. Printed it with layer change.
The print failed, but you can see in wich direction it will go. When print is successful, I will update the pics. 2022-09-18: Pics are updated.
The picture shows the Elephant-single-1.stl. If somebody want to print exactly the same. I made the ears & co a little wider at the Elephant-single-2.stl, so they should be printed at 100%. (It should look the same as the multi-print (…
Some days ago (December 2020) I saw the Saturn-Jupiter-Conjunction. Inspired of it, I designed this keychain. Printed it with filament change. I used PrusaSlicer. Have fun. Print instructions Layer height: 0.2 First layer height: 0.2…
Needed something so that the towels hang on the hook and do not fall off. Had the idea to use some 2" clips, I had. Thought of a construction between the clip and the hook. Designed in Fusion360. Print instructions The clip you need buy…
These are all currently available results.
