Counting matching models…
Updated to v2 for various duct compatibility and issues I encountered over the past few months. 1. Creep problem After using it for several months, the problem with v1 was that the layer direction was not good for pressure distribution…
Double Helical Gear Mod on BFI (Beefy Front Idler) It has been modified based on Diyshift's BFI Gears user mode I made it to deliver better torque and prevent it from being twisted than normal gear The single-helical gear was found to…
Jonsbo/Jonsplus Z20 Feet Riser It's 30mm high, but even if it's higher than this, there's no change in temperature, so I think it's the best length Based on the Thermalright TL-S12 system fan 1000rpm I'm using, the internal temperature…
Voron CW2 VoronTap compatible Smol Mantis tool head Although it is a cw2 compatible head, but extruder uses orbiter 2.0 Because all my printers use orbiter2.0…👍 Due to the lower motor position of the orbiter extruder, the shape of…
Works perfectly on Trident 300 and above You can put 2 spools, one on each side. In theory, Trident 300 can be used with 4 spools inside. I haven't checked the 250 size, but it would probably work. The difference between 250, 300, and 350…
The original large mount had a small heat dissipation space, so when printing in a high temperature enclosure (over 60°C) for a long time, a problem of heat breaker clogging occurred. Considering that hot air goes upwards, I added some…
A modified Purgebucket for the Voron Trident. Not for regular Trident!! For Trident with Klickyprobe removed Klicky -> another short probe (I'm not sure) Klicky -> Voron Tap (My Situation) Fix the purgebucket to the XY gantry so that you…
Convert the remaining Logitech pedal to the handbrake It's much quieter, faster and better than AliExpress's cheap handbrake For the axis, we use a PVC pipe with OD22 ID16. It's lightweight and very strong It's my first time making an…
There is an opinion that the lid is broken, so I added an easylid of a slide type Insert the lid in the form of a slide and secure it with a 6mm FHSC bolt Additional 6mm FHCS and heatset insert are required…
This is a clip that can be used instead of the silicone ring on the M.2 NVME heatsink. I made it because the silicone ring is easily hardened and broken by heat. Designed for slim 3mm heatsinks, mostly used in SFF systems. If you use a…
Voron legacy Internal Front Idler Upper Upper front idler for box chamber without top hat
This is a nozzle cleaner for Voron Trident + Archetype (Small) users. I tested it on Blackbird and Breakneck for about a month and found no problems so I am uploading it. The mount design was referenced from purgebucket and the bucket…
This is a 3D printed gt2 20T pulley. It can be fixed to a D-cut or regular shaft using a heatset insert. Unlike metal pulleys, it should be used in places that do not require strong torque. I created it for use in an incremental encoder.…
This is the front cable cover of the Jonsbo Z20 case With the case on the side, I made a cover that covers the cable because it keeps showing. It's fixed to the frame using a 6x3 magnet At first, I wanted to follow the design of the case…
The original mount using the m3 square nut can now be used as a heat set insert. I've been using it for a month and haven't had any problems! The original model requires 35mm bolts. However, the heatset insert requires a bolt of about…
Momo quick release spacer Can be used on any 6-bolt mount using 70mm spacing There are 4 types: 5, 10, 15, and 20mm. When printing, the strength of the infill does not increase as much as expected. Increase the number of out walls The…
This is not a small size mjolnir, that is impossible due to interference of the xy joint. This is an archetype core for using a small size hotend on a medium size mjolnir. Basically, it can be used with any hotend that uses a combination…
Maybe because it's just been released, I couldn't find the released cad file at all I couldn't even get a detailed size drawing I bought it myself and measured it with calipers as accurately as possible It may not be very accurate 🥲 The…
Mount that allows the Hisource K0802WS Switch Hub to be mounted in a 10inch rack The height and bolt hole spacing are standard 1u spacing
This is a paddle shift for AliExpress 320mm wheel button box. Better assembly and maintenance, Momo quick release compatibility Use m3 heatset insert instead of m3 nut (need 20 heat set inserts in total) Problems such as missing magnets…
A modification that uses XH instead of PH connector for the Archetype Fan Splitter I mainly wanted to solve it with the parts I have rather than buying ph connectors using xh connectors The clasp on the connector must be cut off (Same as…
This is a push-type handle-additional mod for the Taffert Designs Belt Deflecto Meter. Based on the open design of mo_ks. You can measure the belt more comfortably with one hand. https://www.thingiverse.com/thing:6600277 The design and…
I think products from other companies that share the same PCB can probably be used, but I can't give you a definite answer until exactly which company's products are compatible…
A mount that can mount the KT GigaFiber2 wired router in a 10 inch rack Supports 4 keystonejacks The height and bolt hole spacing are standard 1u spacing
These are all currently available results.
