Counting matching models…
Simple filament guide for MK2/S + MK3/S printers. Main design considerations V2 (Green) provide enough gap for filament movement as Z rises higher arm in respect of spool to aid filament path / extruder reduced thickness of arm V1 (Blue)…
This is remix of left/right sides from @Lukes3D Hexagonal paper towel holder to be used as part of the honeycomb storage wall. Spacing on HSW works well to fit roll of paper towel. The sides allow flex which is helpful for adding /…
Updates May 22, 2022 added dual version of insert-empty Simple remix of the original insert-empty (single and dual) to remove 3 of the 6 tabs to reduce friction and hopefully improve insert / removal with the honey comb wall.
Holder for 2 x small/medium sized scissors in a single hex slot. Top slot sized for 24mm. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here…
Holder for digital / vernier caliper. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Hex…
Updates May 18, 2023 #3 complete redesign to ensure that lid can be closed without issue and using alternate method for attachment to filament cartridge. Many test prints and successully used within machine. Previous version moved to V2…
Turns the honeycomb wall holder into a portable honeycomb stand. It requires the following parts to be printed 2 x HSW 5xWide Base Support 2 x Hex Top Joiner - 47 Degree Angle 4 x Hex Bottom Joiner - 66 Degree Angle 8 x insert-empty…
Updates May 10, 2023 added version with 3 tabs removed, 3 tabs remaining - as removing all tabs was too much and didn't provide enough stiction in some cases. The 3 tab version provides middle ground for providing enough “stiction”…
Rack style holder for model paints x 6. STLs available 6 x 33m diameter (aka Citadel) 6 x 25mm diameter (aka Vallejo) Relies on the “insert-empty” hex part used in the HoneyComb Wall. Further types of insert-empty can be found here…
Design to hold tools with rounded handle and marker pens. Relies on the “insert-empty” hex part (or similar x2 x4 parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated…
An aligator style clip to assist with model painting. Clip strength is firm and feels like a strong pinch on skin. Model clip allows for different style of teeth caps to be added - Tall, Short and Wide. Model clip can be attached to BBQ…
Holy Honeycomb! Your wall is organised to the max but you have one more item to add, but alas no usable hex spaces left or space enough to extend the honeycomb with another wall. This is where the Single Hex Extender might be useful to…
Designed to hold needle files that have a handle. The holder is designed to grib top portion (3.5mm) of the needle file with a clip style approach. Clip style initial idea to keep files in place and avoid spillage through accidental swipe…
Hex corner piece to combine 3 wall pieces into a portable honeycomb stand. This is initial idea and I'm interested in potential scenarios this could be useful for. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used…
Design to hold marker pens and relies on the “insert-empty” hex part used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position). Marker Pen Sizes (model includes additional…
News May 6, 2023 added V2 with arm/band size options, improved arm connector Watch It! Designed to hold your watch and/or collection of watches. Two parts required, the arm with hex insert and the watch band holder. The holder inserts…
News May 6, 2023 added 25mm diameter paint holder Designed to hold model paints. STLs available 33m diameter (aka Citadel) 25mm diameter (aka Vallejo) 25mm diameter (aka Vallejo) with side window Relies on the “insert-empty” hex part (or…
Hex insert holder for the wonderful LUCKY 13 Printable Jointed Figure created by @soozafone to provide a LUCKY 13 creative flare to your honeycomb wall. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the…
Based on @RobBeast design. Re-modelled to similar dimensions but incorporate change to hex insert to match the “insert-empty” hex parts commonly used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced…
Holder for Wowstick 1F and screw bits in tubes with option for frequently used screw bits. Features Wowstick space has hole to support USB-C cable Simple holder, just tubes no extra bits Holder, with space for 5 or 9 frequent screw bits…
Introduced to the concept of a one-way bearing when watching another great video by Robery Murray Smith and decided to create a 3d printed version and then once I had basic design wanted to see if I could incorporate it into a small winch…
Holder for hand magnifier with 50mm-85mm diameter and width upto 15mm. Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction)…
Pulley style string/wire guide with 3 degrees of rotation. Tree supports gives this kind of model the success to achieve. Printed in-place as one piece. Model currently in use for last 3 months (since Feb'23) to support an home-antenna…
Holder for micrometer caliper with slot for CR2032 battery. The micrometer is held at slight angle to keep device taut. Following STL's provided Body depth of 22mm and top arm depth of 8mm HexMicrometerHolder_30mm (as pictured for the…
This is a plain (no text) stand to support a flat bottle 30mm thickness. Stand is 80mm wide. Text can be added easily within PrusaSlicer or other slicer with similar feature. My partner requested a stand, she loves it and more importantly…
Initial idea to assess quality of printing with a .4mm nozzle with a model specifically designed for .4mm wall thickness. Specifically created as a starting point to diagnosing surprising print results on one printer where printed part…
I designed a print pusher to minimise touching the print plate and assist in removing purge lines, brims and some prints from the print bed. Originally I designed a similar shaped part to hold an eye bolt allowing rotation and the flat…
These are all currently available results.
