Counting matching models…
A knock box for discarding your used espresso pucks. I have been using for a over a year and it seems indestructible. Print the two parts and use some super glue to hold them together. Depending on your printer they might fit tight or…
Our glass lampshade broke and designed and printed a replacement one. it is a challenging print due to its size and the fact that beams are relatively thin, but totally manageable. Opening is 47mm, if you use PLA to print it make sure you…
I measured the caps on my Astra 18" wheels and they are much longer than the original design, 320mm long and 17mm wide, so I cut the original half and expanded it so that the inner shims will start at the same point. I will try to print…
This is a very niche model, but might seem useful to someone other than me. This is a mount for the ePass by Attiki Odos in Greece and it is meant to be mounted with some double sided tape (VHB works best) on the car windshield. I printed…
Nothing fancy, just a simple case to protect the remote from the occasional fall. I made two versions, a thin one that can be used with hard plastics like PLA, ABS, PC or Nylon and a beefier one to be used with TPU (works with hard…
I really liked the original design but I wanted to attach mine to the wall as 4 toothbrushes take a lot of space, so I added a small wall that I intent to glue to the wall with some montage glue or strong two sided tape (did not want to…
I used ABS for this as I think it helps to be more durable due to its "springiness" but PETG should work fine I think. If you are using PLA make sure that it can handle the heat from the portafilter without deforming (should be ok if you…
My Dremel box hinge broke so I had a go at designing a replacement. You need to print it from a strong material (I used ABS) and use 4 perimeters. I also used tree supports for the round part on the back and they worked great. It is a…
I needed a place for the tools I am using for my 3d prints and thought of making a custom rack that would fit everything I use, but I think it is pretty versatile to hold different small tools. I got mine mounted onto my lack printer…
My antenna cover broke from the base, so I designed this to go over the antenna wire. It is held into place with some glue or some bluetack Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2…
I lost the battery cap and recreated one on fusion by measuring as best as I could. I printed it out of red eSun ABS+ and it fits quite well. Not 100% percent perfect but it gets the job done. Needs support from bed enabled and 0.1 height…
Replacement for the cog for the IKEA enje roller.
Restore your Robot Rampage board game with this custom replacement robot token. Designed as an accurate replica of the original wooden robot counter. The model is the exact dimensions of the original (25mmx11.5mm). To get the same weight…
These are all currently available results.
