P
PrintablesRobert Givens
BambuLab AMS 2 Pro Dryer Pod
Narrower remix of the original box to fit the AMS 2 Pro.
- Downloads
- 1,131
- Likes
- 92
- Rating
- 4.89
All models
Counting matching models…
P
PrintablesRobert Givens
Remix Case for LILYGO Paxcounter LoRa V2.1 ESP32, Tinygs, Meshtastic
Remix of a case for a Lilygo esp32 board, but with a mounting flange and case snaps. Use M2 screws for the bosses, the mounting flange holes are 4mm in diameter.
- Downloads
- 664
- Likes
- 66
- Rating
- 5
P
PrintablesRobert Givens
Generic Battery Organizer (AAA, AA, C, D, 9V, CR123)
I made a simple interlocking battery organizer for one of my drawers. The trays are 156mm wide (6.14 in). Battery Types: AAA, AA, C, D, 9V, CR123
- Downloads
- 347
- Likes
- 48
- Rating
- 5
P
PrintablesRobert Givens
Catan Game Pieces
Modeled up some of my Catan game pieces so that I could combine game sets for more players. I would recommend a high infill just to get the weight similar to the original wood ones. I also set one wall on the bottom layer and ironed all…
- Downloads
- 317
- Likes
- 24
- Rating
- 5
P
PrintablesRobert Givens
Crock Pot Knob
Knob replacement for a Proctor Silex Oval Slow Cooker. This was modeled off of the original know from my unit. A small amount of support will be needed for the underside. I would recommend a higher temperature material, PLA may deform…
- Downloads
- 154
- Likes
- 10
- Rating
- 5
P
PrintablesRobert Givens
Catan Box Organizer
Box organizer for a 5th edition Catan, that can hold the pieces for up to 14 player games. It can hold the contents of 3 full games and one 5/6 player expansion along with some shore tiles from seafarers. I like to play larger games of…
- Downloads
- 137
- Likes
- 43
- Rating
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P Headlight Trim Body Clip
I had a couple of the body clips on the headlight trim break on me so I modeled up some replacements. These print on their side with no support needed (I modeled all needed supports), you way want to add a brim. Material: ABS Wall loops:…
- Downloads
- 124
- Likes
- 24
- Rating
- 5
P
PrintablesRobert Givens
Hijet S110P Oil Filter 1/2" Socket Adapter
This is a simple oil filter 1/2" socket adapter for a 97' Diahatsu Hijet. Filter part number: 16510-81403 and 15601-87703 Shape 14 sided, flat to flat distance of approximately 63.8mm I printed it in Black ABS with 5 walls and 50%…
- Downloads
- 122
- Likes
- 20
- Rating
- 5
P
PrintablesRobert Givens
BentoBox v2.0 Base Modification for Electronics
I modified the V2 BentoBox base to add space for hidden electronics and wiring. One version is just an open space for electronics and wiring and the other has a place to put a small OLED display (look for 0.91 I2C OLED). The OLED version…
- Downloads
- 78
- Likes
- 23
- Rating
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P 6.5" Door Speaker Mounting Ring
This is a 6.5" speaker mounting ring that I designed to go into my '97 Diahatsu Hijet doors. Note that the window does not interfere with this location and there is plenty of depth for fairly deep speakers. I used these for the generic…
- Downloads
- 65
- Likes
- 15
- Rating
- 0
P
PrintablesRobert Givens
Wera Kraftform Micro Wall Control Rack (Parametric)
Parametric storage rack to mount any number of Wera Kraftform Micro screwdrivers to a Wall Control panel. The Fusion360 backup file is included, I also included an instruction image to help with changing parameters. The model parameters…
- Downloads
- 50
- Likes
- 10
- Rating
- 0
P
PrintablesRobert Givens
PixelFX Retro Gem N64 Adapter
A remake of the included PixelFX Retro Gem N64 Adapter that uses M2 heat set inserts instead of the M2 nuts. I had some issues with the nuts not staying in place so I modeled this up. I used Ruthex M2 heat set nuts and had the iron set to…
- Downloads
- 38
- Likes
- 8
- Rating
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P Oil Dipstick
I wanted to get it modeled and posted, just in case somebody lost theirs. Not sure what materials would be best for engine temperatures. A piece of steel or brass could be used to replicate the stick and the handle could possibly be made…
- Downloads
- 37
- Likes
- 6
- Rating
- 0
P
PrintablesRobert Givens
Breadwinner Weck Jar Adapter
I prefer to use the Weck 3/4 Liter Tall Jars to store my starter and wanted to make a simple adapter lid. The dimensions of the top are the same as the Breadwinner lid and the unit is clickable. I did make it a loose fit on the jar to…
- Downloads
- 30
- Likes
- 10
- Rating
- 0
P
PrintablesRobert Givens
CF-13 LED Blinker Relay Box Resize
I changed all the bulbs out in my Hijet to LEDs and needed to find a new blinker/flasher relay that worked with LEDs. I bought a generic CF-13 JL-02 LED flasher relay on Amazon but the box was too big to fit in my 97' Diahatsu Hijet fuse…
- Downloads
- 29
- Likes
- 9
- Rating
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P Dash Phone Mount
I created this phone mount base for a phone mount that I bought, since the original clamp mechanism didn't clip on my dash properly. This base is made to fit into the rightmost dash bolt hole. Just remove the cover and the M6 screw.…
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesRobert Givens
'97 Diahatsu Hijet S110P Dash 3D Scan
Here is a set of simplified meshes of the dash of the '97 Diahatsu Hijet S110P. These are cleaned up and simplified meshes, I had to perform quite a bit of post processing since the source files were hundreds of megabytes. I used MeshLab…
- Downloads
- 19
- Likes
- 6
- Rating
- 0
These are all currently available results.