Counting matching models…
tl;dr Print in place, no supports, no intentionally fused parts. I liked Andrei's bag clip design a lot, but didn't like the way it printed so I redesigned it. This is not a direct remix as I haven't used his models. Instead I made…
This is a hitbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
This is a hitbox-layout fightstick controller that uses 24mm (Sanwa OBSF-24) and 30mm (Sanwa OBSF-30) arcade buttons. There's a version with 6 and another with 8 action buttons. There's also a 218mm-wide version that should fit on an…
This is a mini arcade stick (fightstick) controller that uses a Sanwa JLF-TP-8YT joystick and Sanwa OBSF-30/OBSF-24 buttons (or equivalents with same dimensions). I used an Arduino Pro Micro clone, but it could be used with any other…
This is an easy to print clip that you can use to seal a bag of coffee or anything else. It comes in two sizes.
This is my version of Tom Short's Dactyl Manuform 5x6 ergonomic keyboard (see: https://github.com/tshort/dactyl-keyboard ). Changes from the original: circular holes for USB and TRS panel-mounted sockets added reset button hole fixed thin…
This is a set of magnet tiles with the elements from the Periodic Table. Every tile has cutout on the back for gluing in a circular magnet. I used 9x2mm magnets. OpenSCAD source file included if you want to customize. Category: Learning
This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
This is a button/switch in the general shape of a Claymore mine detonator. It uses a guitar pedal stomp switch for a satisfying click. I put a 3.5mm connector on it so it can be used with devices like the Xbox Adaptive Controller or HID…
This is a USB trackball, made using: a 57.2mm billiard ball PMW3360 optical sensor the PCB from here: https://github.com/jfedor2/rp2040-pmw3360 Kailh GM mouse button switches (or any other switch with the same footprint) this PCB for…
This is a 12-sided omnidirectional speaker design inspired by https://www.thingiverse.com/thing:24308 (but designed from scratch). It fits 120 mm speakers (YD120-1). I will try and provide a more detailed description of the build, but…
This is a functional zero-button USB trackball. Click with your keyboard or some other way. It was made using: a 38mm billiard ball PMW3360 optical sensor the PCB from here: https://github.com/jfedor2/rp2040-pmw3360 2.5mm zirconium oxide…
This is a functional two-button USB trackball. It was made using: a 57.2mm billiard ball PMW3360 optical sensor the PCB from here: https://github.com/jfedor2/rp2040-pmw3360 Kailh GM mouse button switches (or any other switch with the same…
This is a case for Adafruit's Feather RP2040 USB Host board. https://www.adafruit.com/product/5723 It uses M2x4 screws for attaching the board to the case and M2x8 flat head screws for keeping the top and bottom of the case together.
This is a mixbox-layout fightstick made using the PCB from a Razer Raion controller (for PS4/PS5 compatibility). There's enough space inside to fit everything without desoldering the original buttons from the PCB. It uses Kailh…
This is a stand for IKEA LIVBOJ wireless charger that keeps your phone in vertical position. Comes in two sizes, the smaller one needs supports, the bigger one doesn't. Designed from scratch, but basically a variant of…
This is a 36-key version of the Dactyl Manuform (though the thumb cluster is different so it's not really a "manuform" - more like a "minidox"). Derived from: https://github.com/ibnuda/dactyl-keyboard/tree/coffin Only parts for the right…
This is a mixbox-layout fightstick controller that uses four Cherry MX-compatible mechanical keyboard switches, six 30mm (Sanwa OBSF-30) and four 24mm (Sanwa OBSF-24) arcade buttons. I used an Arduino Pro Micro clone, but it could be used…
This is a low profile wireless game controller - leverless fightstick style. Component list: Adafruit Feather nRF52840 Express lipo battery - I used this 1200mAh one from Pimoroni 15x Kailh low profile choc v1 switches 4x M2.5x5mm screws…
This is a functional zero-button USB trackball. Click with your keyboard or some other way. It was made using: a 57.2mm billiard ball PMW3360 optical sensor the PCB from here: https://github.com/jfedor2/rp2040-pmw3360 2.5mm zirconium…
This is a USB trackball, made using: a 38mm billiard ball PMW3360 optical sensor the PCB from here: https://github.com/jfedor2/rp2040-pmw3360 Kailh GM mouse button switches (or any other switch with the same footprint) this PCB for…
This is a fightstick-style controller made using Cherry MX-compatible mechanical keyboard switches. I used an Arduino Pro Micro clone, but it could be used with any other board. For attaching the bottom plate I used 3x10mm wood screws.…
Focusing tab for an old Soviet rangefinder lens. Category: Camera
This is a functional one-button USB trackball shaped like a sphere. It does not sit on a desk, you have to hold it in your hand. It was made using: a 57.2mm billiard ball PMW3360 optical sensor the PCB from here:…
This is a cover for 3Dconnexion SpaceMouse Compact. All it does is protect your precious 3D mouse from dust when not in use. Prints without supports. Category: Computer
This is a "pirate's hook" for opening doors and pushing shopping carts without touching them. Comes in two sizes, otherwise feel free to scale to your liking. Category: Hand Tools
These are all currently available results.
