Counting matching models…
Right off the bat, I'm going to say it's important that your printer is properly calibrated and dialed in for this print if you're doing it at standard scale; retraction being a major factor. I'd personally recommend 150% and over for…
A multi-part scythe so you can have some color separation. More blades and blade mount types coming soon.
A new armor set enters the fold. Here's Sentinel 13. There are a few frame parts which have been modified(included), otherwise it uses the stock frame. The print settings are the same as the other 13 series, except a few parts which need…
Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot Compensation 0.15mm Supports None Additional Settings (Optional) Print External…
ALOUTTINAE 13 Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Infill 20% gyroid First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None Brim Shouldn't…
Backpack coming soon. Works with the original Dummy 13 frame. Two armor sets for the arms. Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .2 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot…
Saw another blank chest up with some holes, decided to make a cleaner one. Includes female variant.
Featuring the new Dummy 13 1.0 updates! Coming soon: accessories pack (weapons, weapon holders, armor, etc). Accessories: https://www.printables.com/model/1037667-ateles-accessories Material Frame ABS/ASA/PETG Armor Any Layer Height First…
Made a sword for my remix @ https://www.printables.com/model/751923-sentinel-13 Recommend a color change for the internal part of the blade for a cool effect.
A weapon's platform for the Atelidae series. 03.14.24 - Looks like I neglected to add several parts. Fixed that. This piece should fit any guns that fit the hands. Assembly -
Longsword and backpack for my Sentinel remix - https://www.printables.com/model/751923-sentinel-13 Swap filament for good effect.
Same printing/assembly as the original Dummy 13. Same frame so armor is interchangeable. Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .2 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot…
Material Frame parts ABS, ASA, or PETG Armor parts Any Layer height First layer 0.2 mm Other layers 0.15 mm Infill 20% gyroid First layer speed 25% of default Elephant foot compensation 0.15 mm Supports Upper Arm Armor / Lower Arm Armor…
For those who like the proportions of the Atelidae line but want the Lagothrix armor. Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot…
Some extra armor I've been working on. Has a couple of guns involved too.
A backpack for arms made for the Atelidae.
Big gun. Good luck with holding it. Might be easier with the backpack designed to hold it 👇 https://www.printables.com/model/803600-atelidae-weapons-backpack-railgun
Working on a 200% scale for a friend, haven't tried these at standard scale but they're designed at that size. Maybe a 0.2mm nozzle and a low layer height would yield the best results for that size. Not an easy print, first layer can be…
there's some bridging you gotta have dialed in for the arms and legs. supports help.
When I print with external perimeters first, the seam is more noticeable. So I set object modifiers on all of the pieces to print with one perimeter on the first layer, and added some light runners for better adhesion on some parts that…
Something I was working on when I was making the Ateles.
Split the pieces up for better color separation.
Made the handle fit the 13 better and made some blades.
Material Frame ABS/ASA/PETG Armor Any Layer Height First Layer .15 Other Layers .15 Infill 20% Gyroid First Layer Speed 25% of Default Elephant Foot Compensation 0.15mm Supports None Additional Settings (Optional) Print External…
Adapted the joint to fit old style hand for the Easy13. Mirror for both hands.
Remixed a few bits to make a mount for my SVO6
Saw the dual spool holder and noticed that the orientation of the spool was rotated about 90°, figured that would give me more control over dual extrusion filaments. Still need to print this but figured I'd throw the model out for now.…
Added a bridge at the top. For bridging testing. You get it.
Made the tail thicker since it was breaking it my pocket.
Just insert a color change right when the top part of the shell starts
Finally got everything fitted and printed.
Didn't love the angle of the original mount.
These are all currently available results.
