1 / 9
SENTINEL 13
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bulkier unit for the 13 series.
- Rating
- 4.667 / 5
- Likes
- 529
- Downloads
- 2,049
- Makes
- 8
- Views
- 12,835
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A new armor set enters the fold. Here's Sentinel 13. There are a few frame parts which have been modified(included), otherwise it uses the stock frame. The print settings are the same as the other 13 series, except a few parts which need support, which are as follows.
| Material | Frame parts | ABS, ASA, or PETG |
| Armor parts | Any | |
| Layer height | First layer | 0.2 mm |
| Other layers | 0.15 mm | |
| Infill | 20% gyroid | |
| First layer speed | 25% of default | |
| Elephant foot compensation | 0.15 mm | |
| Supports | Chest Frame Head Shin Upper Thigh Upper Arm | |
| Brim | Shouldn't be needed, mouse eared variants included | |
| Additional settings | Print external perimeters first
Print first layer with one perimeter | |