Counting matching models…
How to print. For engine use recommended ASA or ABS any other high heat resist material. Might get away with PET since its off on top of the motor. (still it is your throttle body, be responsible) And test test test. Make sure when you…
The original clip weathered away after a solid use of 35 year. also was extremely floppy(pun). Made a couple adjustment for stability and less cable shaking inside the clip. Let me know how it work out for the rest of you. How to print.…
Needed a gasket for my speaker for my car. This is a 6x9 gaskets worked well and seal it air tight. Used PolyFlex™ TPU95 Print Slow
Bambu Hotend holder with mounting locations. Tight Tolerance.
Part Number 11141716134 Holder Part 11141716134 was found on the following vehicles: 3' E30 (01/1982 — 04/1993) 5' E28 (11/1980 — 01/1989) 5' E34 (06/1987 — 10/1990) Z1 Roadster (07/1988 — 06/1991) You can purchase an original one from…
Two STL one logo and one NO logo. For logo to come out recommended a smaller nozzle and/or quality print settings. Remix of Part Number 11141716134 To make it stronger and thinner in the engine bay. Less slop in the cable moving around.…
This is gasket i used after cleaning up the rust and repainting. I used a little PVA Glue to keep it in place. Sealed up pretty tight. Use at your own discretion and clean of the rust first! Used Polyfex tpu 95
My take on the ender 5 plus liner rail. Used it before going to the Merc 1 setup. Heat Inserts are required for this to work well. It GRIPS the Y gantry well, I was able to have serious speed compared to OEM Setup.
Add STEP file for people to make their own designs from. NOTE: 3d printed JAWS are not intended for metal cutting also holes can be smaller (untuned printers) and tighter. They will work you might need to run the bolt one or twice through…
This is a motherboard mound for the Milo 1.5 with the same exact spacing as the LDO kit fly board comes with. You can keep the t-nuts in the same exact location. Small 3m heat inset from the back. Opening is 5mm for the heat insert
This is a reinforced replacement for the factory "Mickey Mouse" coolant flange found on the BMW E92 (N51/N52/N54/N55 engines). The original plastic part is prone to crumbling, leading to rapid coolant loss. This model is designed for…
Hey Team, I've picked up the Nitehawk 36 LDO and am figuring out how to mount it to my printer. The most suitable location I found is on the BNG extruder. This setup is designed to mount to the original bolt using a 40mm M3 bolt. To…
This is a tram tool holder, which I designed while tuning my Milo 1.5. It uses one M3 heat insert to hold the tools in place. If you use the arm, you’ll need an additional M5 heat insert. I recommend using tree supports, although they’re…
An ACME screw thread gage is an essential machine shop tool used for grinding and setting lathe tools when cutting 29° ACME threads . It allows machinists to check the precise 14-1/2° side inclination (29° included angle) on the tool bit…
Super simple strain relief ( tight tolerances, make sure your printer is tuned) Printed on Prusa mk4s. Use two small zip ties. DO not OVER tighten it. Relief not dead locking it in. Easy print. Print for quality not speed.
Basic cover for Empire E105.16 True Blue Digital Box Level 406mm/ 16' Tight seal, well calibrated printer important. Printed in PLA on an Prusa MK3s Draft profile I printed with brim and without brim Basic model nothing crazy Print 2 at…
Simple design easy print Extra parts needed bearing and m5 screw Pause close to the top and insert the bearing. You will not be able to insert it later. Print files for MK4 attached.
These are all currently available results.
