Counting matching models…
Built upon the Gridfinity Storage Box by Pred, this multi-box storage system allows effortless access to multiple storage boxes while maintaining their stackability. Additionally, the modular handle provides optional portability. The…
I highly recommend using Glue when printing this model The only complication with this model is that it has a fairly small footprint on the bed and you need to make sure it sticks to the bed. Normally, I'd use a brim to assist with this,…
Revised 1/7/2024 - Added 1.5mm to the Lid to make it a bit more rigid. Link to the Stacking Shelf: https://www.printables.com/model/701594-stacking-shelf-for-tiny-bins-storage-boxes-wall-mo Gridfinity is a staple for 3d printed storage,…
Standard print settings work fine. I printed mine at 100% infill to give them a little heft, but that's purely optional. There is a worn version and a pristine version. A mix of the two gives a nice effect. Need somewhere to store them? I…
This is the smallest I could get the model while still retaining the spear. I thought the spear was an important part of the silhouette, so I wanted to make sure to include it. But it was the most challenging part of 3d printing this…
Lid is printed top-down (it is oriented that way in the STL). You may want to print the first layer of the lid at a very low speed. I printed it at 10mm/s. This will help make sure the icon details come out cleanly, while only adding a…
This is something I always thought should already exist, but I've never been able to find anywhere. So I finally got around to making it myself. The idea is really simple: I wanted a travel container for my brushes that doubled as a paint…
Super easy print. No supports required. Should print well with nearly any print settings. I just used the default settings, but set the seam to “Back”. Model is approximately 7cm/3in cubed. About the size of a baseball. Feel free to play…
I bought a multi-pack of sandpaper and I wanted a good way to store it that allowed me to easily access the sandpaper I wanted. So I came up with this layered offset design, and it's worked well for me. The separate layers make it easy to…
Updated 2/2/2024 - Added some width to the front teeth and rounded the tips. Should further reduce chance of teeth breaking. Care is still required when removing the supports. Supports Supports are required. Recommended settings: Enable…
Tiny Bins Storage Boxes: https://www.printables.com/model/701118-tiny-bins-efficient-small-parts-storage-parametric This design originated as a variation of my Gridfinity Stacking Storage System , specially optimized for smaller boxes,…
IMPORTANT: This will not work with Silk PLA, PLA with additives, or other filaments with poor layer adhesion. I designed this parametric tube to store my Dragon Coins, but they ended up working well for regular coins as well. The tube…
Simple model for holding pill blister packs in a medicine cabinet. Pills are easy to see and access. This is a parametric model designed in FreeCAD. There is an object in the FreeCAD file called “Parameters”. The primary drivers are…
Print the feet separately and glue them in place. This allows the body to be printed flat on the build plate, reducing the need for most supports. Supports are still needed for the chin. I recommend painting supports on the chin and using…
Designed this for a friend as a gift, thought other people might like it. Change filament after 4mm (at the beginning of layer at 4.2mm for 0.2mm layer height). I used a line width of 0.25mm, otherwise some of the thinner parts of the…
I like having somewhere to put dead batteries until I can take them to be recycled. So I made this little bin that looks like a battery. It has a twist-off lid and should store a decent number of batteries. If you live in the US, you can…
I really liked the self-centering filament holder by 3D Sorcerer, so I remixed it to fit on my RepRack. This spool holder works well for my smaller filament rolls, and doesn't need to be adjusted in size. I have currently only supports…
This is my first attempt at designing a 3D printed wargamer tank. I think it turned out pretty well. It certainly has a striking silhouette. While I don't think it will be a problem, I haven't tested this on a bed-slinger style printer.…
I liked the design of the rugged desktop organizer, but I needed something that would store my boxcutter while allowing easy access. I also added slots for a screwdriver and a pair of scissors to stand straight up, and added a little…
Remix of the clasp from the parametric Gridfinity toolbox. The default one is very difficult to remove, especially if the fit is tight. This version adds a lip that makes it much easier to remove. This is a very satisfying clasp to…
Fairly simple desk organizer using a pattern of heptagons… because I thought it was neat. This prints extremely well with dual-extrusion silk PLA. I set the outer wall speed to 40mm/s to ensure a consistent sheen. All other setting can be…
This is a somewhat specific organizer I built for holding several desk drawer items I had that take up less space (and are easier to get at) if they are stored upright. So I made this organizer to hold them upright. I printed this in two…
These are all currently available results.
![Gridfinity Stacking Modular Multi-Box Storage System [Parametric]](https://media.printables.com/media/prints/638999/images/5250755_44c4a309-62c1-4b34-814b-cd95cdaf5209_2ff84d99-3cfd-42c8-b4b6-48601bb75bd6/thumbnail.png)
![Tiny Bins - Efficient Small-Parts Storage [Parametric]](https://media.printables.com/media/prints/701118/images/5533101_2f648deb-fc05-4013-b48e-62544a7e2586_176a1c70-3a72-48be-9f56-245fd380dcfb/thumbnail.png)
![Cute Chibi Chinchilla [Support-Free]](https://media.printables.com/media/prints/835866/images/6440433_2372fe1f-6800-4bf1-8edf-5bd1ec007ec1_0b46f486-289a-4966-814f-84609f9ed379/side-view.png)
![Stacking Shelf for Tiny Bins Storage Boxes [Wall Mountable] [Parametric]](https://media.printables.com/media/prints/701594/images/5556779_c6549d6e-5124-43a2-bf97-8d7045ba5ce2_4345557a-2c53-43ec-bdb2-d2ce630119e7/shelf-thumbnail.png)
![Simple Friction Fit Tube / Coin Tube [Parametric]](https://media.printables.com/media/prints/827265/images/6381209_4f686eda-a153-4843-9316-4034ab76447b_f32cc258-1856-4ad2-ba62-0d14fac8e15f/thumbnail.png)
![Pill Blister Pack Holder [Parametric]](https://media.printables.com/media/prints/823249/images/6353320_5e6e4046-1102-40c2-9942-ea26e1f3cb16_d7a79dc1-dfce-4622-889f-c3d3a40621fc/thumbnail.png)
![Cute Chibi Alpaca [Minimal Supports]](https://media.printables.com/media/prints/849544/images/6536340_74a2f793-8000-481c-a4c0-7c441b96b78c_5e694af9-acf8-4904-b9d0-666aa43d312f/thumbnail.png)
