Counting matching models…
UPDATE: I made a v3 which is a variation of the short version, that is more practical as a bookmark. --- Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse (thing:630577) There was similar bookmark on…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…
Lost the body cap for my fuji x camera, remixed file to recreate the same. Should be comparable to Fujifilm's Camera Body Lens Cap BCP-001 Printed with a 0.6mm nozzle at 0.2mm layer height with support cubic infill for ~35min print time.…
This is a remix of NilsDougan's very cool coaster laser cutting patterns (thing:2821011) adapted to work with FDM printers. The STL is scaled to 4in (101.6mm) sq by 2mm thick. Print instructions 0.2mm 50% infill Avoid standard PLA if…
Extended another design for a trunk hook by 2cm at the stem to better accommodate access to the hooks. The bottom of the hooks have slightly problematic overhangs, so I enabled supports from build plate. --v3 Should not required supports…
A simple organizer box for holding magazines, files, papers, etc. Notes While this should be printable with any nozzle size, the model thickness was optimized for a 0.6mm nozzle. No supports needed on a stock Prusa MK3S or better. Should…
I saw another attempt to remix the backplate with a MicroSD card, but that version was quick and dirty and did not adhere to the original design of the New 3DS. I did the remix from scratch and did it to better conform to the shape of the…
Wall-mounted corner bracket for the Meross MS600 presence sensor. Single screw needed to fasten to wall. Created a 30 degree version and a 45 degree version.
Would need to be printed with a flexible material. I've printed versions both with 95A and 85A TPUs--both work, the softer one is easier to insert and remove. Created (very amateurishly) using Fusion 360. Print Recommendations: Nozzle :…
Modified from Aqara’s official adapter STP files. Created 2 variants: A tiny insert that prints in 5 minutes that should fit into "Adapter 5" that comes in the box with the U200. The entire adapter where the interface point will work…
The magic of 3D printing is that you can build super niche customized items on the fly. I wanted to use my Anker Nebula Capsule to project video on the ceiling so that I can watch video while comfortably lying in bed. There are a couple…
This is a remix of the Raspberry Pi Camera face cover from the Articulating Raspberry Pi Camera Mount for Prusa. This supports the Arducam drop-in wide angle replacement for the Raspberry Pi Camera v2. See:…
For use with the excellent modular mounting system found on Thingiverse (thing:2194278)/(thing:4619937) Quick release adapter that attaches to the top of a Dolica Proline tripod. Not sure if the same mating system is usable in other…
UPDATE: Added variants for a variety of rod sizes/materials, Metric and Imperial. Overview This is a highly refined remix of the original spool shelving design by @ihateu3_593067 , transformed into a fully modular, user-friendly system…
I printed this at 0.3mm layer height. Set no top/bottom layers to save some filament, and for aesthetic purposes. There is a divot in the bottom for a connector/alignment brace, but I never got around to making the actual brace. You will…
This is a cover designed to fit over G9 sockets fit into a E26 slot. Sized to accommodate LED bulbs that are longer than typical G9 halogen bulbs. The second photo is the original glass cover that I was replacing, which was designed for…
Quick mashup of the two linked models in order to fit the Thordsen3D IFD-175R inline filament dryer to the Prusa MK3/S/S+ frame. The inline filament dryer can be found here: https://thordsen3d.com/
The original shape sorter design was a good, easy-to-print toy. However, the tolerances were tight enough that it became difficult to pull off a face to retrieve the blocks once inserted. This meant the design lacked an easy way for…
Remix of @jbehler_2645718 's safety gate adapter to work with a 1" square steel banister. Adjusted the hole shapes to print more round on a 3D printer (model holes designed as tear drop shapes as opposed to circles) BOM: 2x M4x16 screws…
These are all currently available results.
