Counting matching models…
This is my addition to the Jonsbo N4 case to keep disks at safe temperatures. The magnets used are 2 mm thick and 8mm in diameter (4mm radius). The fans used are: ARCTIC P12 Slim PWM PST 120x15 Printed on Bambu Lab P1S with a black matte…
!! I found that the holder for the SDR is not working fine with the metal wire support, I am changing the model to fit is in a better way !! I am also making a better reinforcement for the antenna holder, it is bending too easily. This is…
That is my case for the Zimablade. You need: 4x M3x10mm to hold the SSD's 4x M2.5x12mm hold the top part 4 M2.5 brass inserts at the bottom part 1x 60x60mm fan (with mount screws - 4x M3x20mm in my case). The top part is common for both…
This is the hConsole, a portable cyberdeck that you can build yourself, it is hold together using 6 M2 screws and brass inserts and it is powered by a Raspberry Pi 4 model B. This is the complete list of parts to make one yourself: 6xM2…
Removed some material to keep the RGB visible and use less filament.
This is my case for the Badger 2040 W, enjoy it :) You need: 4x - M2x6mm screws 4x - M2x3mmx3.5mm thread brass inserts. 1x - ADAFRUIT INDUSTRIES 1578 Lithium Ion Polymer Battery - 3.7v 500mAh Battery Size: 29mm x 36mm x 4.75mm / 1.15" x…
I made these to cover some gaps I am not using.
This is my case for the Badger 2040, enjoy it :) Use 4x M2x12mm to hold it together. Update 4/Sep/2023: New Badgers have the screw holes a little off comparing with the first batches, use the NEW files if you just purchase the Badger 2040.
I didn't liked the official case, over complicated and fragile. I built this one from scratch, should work with all versions. Parts used: 2x M2 brass inserts. 2x M2x6mm screws
No need for support, reduce the overhang speeds when printing it for the best finish. Use a 10mm or 3/8 in. Elastic band to hold the line in place with the buck. This spool stacks perfectly with this spool holder:…
I've made this enclosure for a Suzuki Tachometer, however it should work with any 85mm gauge. I have a round and a square model (I like better the square). Both models are secured using 8 × M4 screws . The enclosure provides an internal…
I lost my cap for the power/data cable, so I made this one and printed it using TPU.
Enhanced plate design for larger GPU compatibility, ensuring seamless installation while preserving the case's aesthetic
A fix for the arm if the fabric is ripped by the original screw.
This is my Pimoroni Tufty 2040 Case with space for battery 2000 mAh. See below links and parts used. You print only the back (I recommend you to print the front for better protection. Do NOT overtighten the screws or you may damage the…
ePaper Screen enclosure and Raspberry Pi Zero holder. Parts List: Tri color Waveshare 1.9 inch e-Paper Module. (e.g. https://www.amazon.com/gp/product/B07P8LGGC7/ 20.99 USD ) Raspberry Pi Zero with headers ( 20.95 USD -…
Parts: 2x M5-0.8 x 40 mm 2x M5-0.8 Metric Nylon Lock Nut
Fusion MS-RA60 Marine Template.
An adapter to hold the after market Hopkins 4-Flat Connector.
This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad) from afternoonlabs.com, it uses: 7x M3 screws 4mm for the PCB 8 10mm for the faceplates. The SVG EPS, AI and DXF files is to laser cut…
I needed just a small angle to the mixer.
Replacement for the Honda 28455-881-006 Plate, Seal. I've printed mine in Carbon Fiber reinforced filament, but ABS should be enough.
You need: 4x M3x8 screws 4x M3 brass inserts The brass inserts are installed at the Shut-off_switch_lock.stl . The universal Kill Switch / Emergency Shut Off switch Holder I used is this one: https://www.amazon.com/gp/product/B0777CSJH6/…
Bracket/Case for KCD1 T85 1E4 3 Pin Round Waterproof 10A/6A 250V AC Rocker Switch (On-Off Switch).
This is my new battery cover with extended space for electronics (RCA to RF converter and a Raspberry Pi with the Spotify Logo on it.
This is the feet I've created to snap into the Monoprice Weatherproof/Shockproof Hard Case (6.6 liters version - not sure about other sizes).
This is the template for the Suzuki Side Mount Control Box (67200-93J60-0000).
I bought this used Bike Rack and I broke it on the first day. Made it so I can use it. Hope this helps someone too.
These are all currently available results.
