Counting matching models…
5/16-in window screen frame corners. Cost about $0.50 each at a Lowes or HomeDepot. Substantially stronger when made of PLA. Here's a tutorial on how to build window screens: http://www.mobilehomerepair.com/screens.html Category: Outdoor…
Super-sized version of the mini tape gun. This version fits a regular 3 inch roll of packing tape. Post-Printing Hot glue the parts together. Sharpen the cutter teeth using a metal file and a lighter. Hammer the end caps into the spool.…
This package includes the parts to make a buckle. You can use it for a belt with nylon 1 inch webbing or a luggage strap. These parts were not designed by me. I only fixed the model errors and added tree support to the female buckle via…
Thin cross shaped walls. Designed to test PrintDry appliance before and after filament drying. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: Doesn't Matter Resolution: 0.25 Infill: 100% Category: 3D…
This is a customizable Archimedes' Spiral. http://www.wolframalpha.com/input/?i=Archimedes%E2%80%99+spiral Category: Math
A sample knurled surface. Designed in OpenSCAD Print Settings Supports: No Resolution: 0.2 or less Infill: 100 Category: 3D Printing Tests
Leatherman FREE P2 / P4 multi-tool adapter that uses the Philips head screw driver to allow any hex 1/4" (6.35mm) screw driver bit to mounted. The adapter can be stored on the clip. The assembly still fits inside the nylon carrying case.…
3d printed inserts to fit into the SOG PowerPint multi-tool. Press in place using plyers and glue using cyanoacrylate (super/crazy) glue. Print at 0.2mm layer height using a 0.4mm nozzle. 0.6mm nozzle will also probably work. Several…
Cover for a 5.25" optical drive bay. Uses the screw holes from an actual drive. It can be used with ANY computer case. Most computer case makers include proprietary covers. Drill the holes to about 2.8mm and make thread screwing in a…
Bracelet designed for flexible filament. Interior is hollow to make it more flexible. For more customization, check out http://www.breakitbracelets.com/customize Category: Bracelets
Thumb bar for the Leatherman Wave+ / 2nd Gen multi-tool. Press in-place using plyers. Glue with cyanoacrylate. You can use an razor pen to smooth the edges so it has a good feel. I am open sourcing the design so others can learn from it…
Rutgers, the State University of New Jersey Category: Signs & Logos
This model was sold on Etsy and ebay. It is now free, open-source for educational purpose. Press in place gently using plyers. Glue the back if desired. Smooth the edges using a pen razor. A thumb bar insert can be made for almost any…
This is a Thumb Bar insert for the Leatherman Charge. Press into place using plyers and glue with cyanoacrylate. These were previously sold on Etsy and ebay. The design is now open-source so anyone can learn from the design and/or make…
Half-sized version of Stretchy Bracelet by emmett Category: Bracelets
Cover for a Kossel 2020 power supply. Modified from: http://www.thingiverse.com/thing:670181 Plug and switch used: http://www.ebay.com/itm/380964346117 Category: 3D Printer Accessories
Chuck key to fit a 1/4" socket drive. The purpose is to attach it to an electric screwdriver or electric drill to open the chuck of a drill press that doesn't have a reverse. Print Settings Printer Brand: Anet Printer: A6 Rafts: No…
http://futurama.wikia.com/wiki/Fing-Longer Extends the length of the index finger. Allows the user to press things much further away than with a normal hand. Season 2 Episode 20: http://www.imdb.com/title/tt0584432/ Category: Hand Tools
Plant pot stand with a drainage hole in the center. The size is 4inch diameter but it fits larger and smaller plant pots. There are a few slightly different versions available for download. Some versions have knurling to create a rough…
Make your own spiral in OpenSCAD http://www.wolframalpha.com/input/?i=Fermat+spiral Category: Math
Customized version of http://www.thingiverse.com/thing:233561 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=233561 Instructions Using the following options: $fn = 75 wrist_circumference = 233 units = 0…
A pinky from the v2 prosthetic arm. Bumps have been added. Filament used: http://www.ebay.com/itm/-/111686591901 Print Settings Rafts: Yes Resolution: 0.2 Notes: Bumps added in MeshMixer. Printed in Flexible PLA. Category: Other
http://www.wolframalpha.com/input/?i=logarithmic+spiral Category: Math
This library includes a function to convert Strings into floating point numbers. It's useful if you are generating OpenSCAD files using a customizer program and want to put user HTTP form data directly into the file. For example, using…
* Update 7/15/2017 * Made cutout larger so homing Y min works without hitting. * Summary * The acrylic plate that comes with the Anet A8 auto bed leveling kitkit broke in half when I tried to screw it on. The holes are also in a bad spot.…
Small replacement strain relief Category: Replacement Parts
Plug your AC power adapters into this plastic holder. Then plug the holder into peg board. This is peg board: http://www.peghooks-pegboardhooks.com/siteimages/Plastic%20peg%20board%20hooks,%20accessories,%20pegboard%20hook%20pegs.jpg Peg…
Keys that have contact information attached are more likely to be returned. Instructions Print the two pieces separately. Glue the window into place to hold a piece of paper/plastic. Category: Organization
Rubber trampoline foot for a mini trampoline. The actual foot has two washers inside to prevent the feet from pushing through the rubber. They are about one inch diameter. You would print this using flexible filament. Category: Toy & Game…
Derived from: http://www.thingiverse.com/thing:845343 Category: 3D Printer Accessories
Holder for the Leatherman FREE P2. Fits in either orientation where the metal clip is facing outwards. I haven't created the clip section yet. Feel free to finish that part as a remix. Category: Tool Holders & Boxes
Logo of NJIT (New Jersey Institute of Technology) Newark, NJ Category: Signs & Logos
A labyrinth is like a maze but with a single path. The design features smooth rounded walls to follow the path with your finger. For more and custom labyrinths: http://www.mylabyrinthlab.com
This is a plate for the heated bed Mosfet MKS V1.0. It's to prevent accident electrical connections on the bottom of the PCB. It gets mounted with M3 screws and nuts. Nylon spacers (11mm) were put between the screws and nuts. The 3D model…
Mounts the RepRapDiscount LCD controller to the Kossel 2020 Instructions The holes are purposely designed to be be too small so you can drill them out to exactly 3.0 mm. Category: 3D Printer Parts
This is a repair for some cheap sandals. The foam started to rip and the part that goes between the toes would pull out. This piece fits onto the round piece on the bottom of the sandal. It creates more surface resistance so the thong…
Customized version of http://www.thingiverse.com/thing:1310867 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1310867 Instructions Using the following options: Lower_Logo =…
Insert rulers to center intersection Slide rulers to match your item's length and width Fits 40 inch, 2mm rulers sold at Harbor Freight Tools. Requires the BOSL v1 library to edit the OpenSCAD .SCAD file.
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: BicepCircum = 241 ForearmLen = 203…
A small keychain for visitors to a printing shop. Hopefully they will have their own ideas for what to 3D print. http://www.cegraphic.com Instructions Print the background in one color. Use @pause in the gcode to make Repetier-Host pause…
This is a small plastic spacer that goes between the mount points. This piece helps keep the hinge tight so that the fan assembly stays in place. Category: 3D Printer Parts
Print solid (100% infill). Off-white PETG is sold by "California Filament". To replace, Unscrew lamp from base Remove cover from base Add 3d printed base cover Reinstall screws
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: BicepCircum = 330 ForearmLen = 260…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: BicepCircum = 241 CuffLength = 70 ForearmLen…
Added support brace legs for button presses. Instructions Print with thick layers, drill out the holes to 3mm. Category: 3D Printer Accessories
Makerbot has been up to some shenanigans lately. http://www.fabbaloo.com/blog/2014/5/25/has-makerbot-crossed-the-line-for-some-yes I'm dissatisfied that Makerbot trying to capitalize on community designs while blocking further progress.…
A case for an infrared receiver. The devices re-transmits any IR remote signal over the internet using Wifi, TCP/IP, and HTTP. Modules used: ESP8266 and IR Receiver/Transmitter pair Micro-controller:…
Simple plate to cover a 50A power supply. Drill holes on the right side as needed. I zip-tied the front side of the plate to the printer frame. This is an Anet A8 Prusa i3. The width of the power supply is about 120mm. You can find the…
Print at 0.2mm layer height No supports or post-processing needed Edit the .SCAD file to change the size
Plate for mounting an autolevel inductive sensor on a CTC PI3 Pro B . The sensor is an inductive probe SN04-N . You will need to mod the GT2560 motherboard to connect it to the sensor. Put a male pin on the 5v pad, and solder right angle…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: LeftRight = Left HandLen = 180 BicepCircum =…
Nozzle holder that attaches to a 20x20 mm extrusion. Fill the inside with some type of coating that won't melt when the nozzles are stored while still hot. Has 8 openings and each opening can fit a few nozzles. Mounts to the outside of…
Vinyl cutter designed to fit the Rostock Max. Blade holder used: http://www.ebay.com/itm/200918963815 Designed from models provided by SeeMeCNC: 70768 EZGroove LC1.DXF 70768 EZGroove LC2.DXF The spacers are 1/2 inch long. Category: 3D…
A small plastic piece to keep the filament from popping out of a thickness gauge. The digital thickness gauge can be connected to an arduino. Implementation Details: http://www.soliforum.com/post/31240/#p31240 Digital Thickness Gauge:…
Customized version of http://www.thingiverse.com/thing:45101 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=45101 Divided using Netfabb (option is hidden on bottom right). A little too thin in the center.…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: LeftRight = Right HandLen = 165 CuffLength =…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Instructions Using the following options: HandLen = 165 LeftRight = Right BicepCircum…
Customized version of http://www.thingiverse.com/thing:1672381 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1672381 Category: Other
See screenshots for the change. The original piece wasn't threadable to fit a standard PTC connector. The bottom part was threadable so I mirrored it. The top is the section that needs to be threaded because it attaches to the bowden…
The Folgertech Kossel 2020 kit comes with a weak direct drive extruder with no adjustments. I designed this extruder mount to add a Steve's extruder to the 20x20 extrusion fame. The force is about 5 times stronger and the stepper motor…
This part is for the SeeMeCNC Rostock Max v1 with the original "Steve's Extruder". It fills in the gap where filament can pop out if it gets off track. How I Designed This Designed by PolygonHell from SeeMeCNC Forums.…
A small plastic adapter to put rubber feet onto a Kossel Mini/2020. The inside gets drilled out to about 3mm and threaded using a #6-32 tap. The adapters get hammered into the 5mm holes in 20x20mm extrusion. Fit's this rubber/screw foot:…
Lauren and Dave 2014 OpenSCAD development version with text() preference enabled. Customize at: http://www.jbcse.com/customizer/ Here's the font used: https://code.google.com/p/googlefontdirectory/source/browse/#hg%2Fofl%2Falexbrush…
Customized version of http://www.thingiverse.com/thing:74322 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=74322 Instructions Using the following options: image_file = lithopane20130608-1537-xk0ujc-0.dat…
These are all currently available results.
