Counting matching models…
Angle Finder Protractor Angle Indicator Block The beveled block counter offers a flexible and reliable way to measure and verify angles, making it essential for numerous practical uses. Printed using PETG or PLA with 15% infill.
Microphone holders. For microphone with diameter 20 mm. Join bolt is M6 x 12 mm Print 100 % infill, PETG
Ubiquiti UniFi Wi-Fi Access Point Holder Flat surface for easy attachment to a wall using double-sided tape. Printed with PETG or PLA at 15% infill.
Simple PTFE tube organizer, printed with PETG at 100% infill.
RC rod end easy wrench link tool. Two sides with different chamber sizes. Printed with 20-30% infill for outside part, 100% infill for the inside part.
Holder for the 3D LabPrint - Piper J3 CUB. It can be attached to a wall or cupboard using double-sided tape. Printed with PETG at 15% infill.
Suitable for tall cans. Suggested to be printed with PETG at 20% infill, 3 perimeters, and gyroid fill pattern. The container consists of a main body, lid, and seal. The lid is printed with 100% infill. The seal is printed using TPU. Due…
This model is printed using PETG or PLA with 15% infill. Overall dimensions: 235 × 50 × 60 mm (L × W × H); wall thickness: 4 mm. The logo is printed separately in a contrasting color and attached to its engraved slot.
This is a universal adjustable pen holder designed to attach with double-sided tape. It can be installed in the car's glove box or anywhere else where double-sided tape can be applied. With interchangeable clamps, it holds pens with…
Propeller cone – 64 mm / Vrtulový kužel – 64 mm. For assembly, two M4 socket head screws, 20 mm in length, and two M4 self-locking nuts are required. Made from ABS or PETG with 100 % infill. Supports needed (on the printing board only)
Universal wine bottle stopper. Few versions for optimal grip inside (and outside) the bottle. Made from flexible TPU material. Printed with 15% infill.
It is made from two parts to enable printing. These two parts need to be glued together. I have also attached the STL file as a single piece.
Template for radius R5 - R10, external and internal. Printed PETG or PLA with 15 % infill. Layer 0.15 mm. Includes a rim with engraved numbers for multi-color printing. A stand is also included.
Honeywell Home thermostat holder – designed for attachment to a cupboard using double-sided tape. Printed with supports (for the slots) and 15% infill.
You can assemble and adjust the width of the spool rollers according to your needs. The holder fits inside the box tray. Printed with 15% infill, no supports needed. PLA or PETG are suitable materials. Used bearings 608z.
Proxxon 28608 jaw protectors, printed with TPU and 15% infill.
Candle holder for 20 mm or 26 mm diameter candles. Printed with 15% infill. No supports needed. Safety notice: Be aware when using it with burning candles – there is a risk of melting or fire if the candle is too short.
Netatmo unit holder 2 with open or hidden holes for attachment. Printed with PETG, 15% infill, no supports.
RC airplane universal holder for glow engines 0.46 cu in (7.45 cc) – 0.55 cu in (8.93 cc). Suitable for mounting to RC plane engine firewall. Printed with carbon fiber-reinforced material, 100% infill.
Designed for easier handling when opening the glass box above the front doors. The geometry reflects the shape of the original finger recess for an improved grip. Printed with elastic TPU, 15% infill. The optimal printing orientation is…
HI-TEC and FUTABA standard servo-size universal housing (vertical or horizontal positioning) with servo lock plate. Printed with reinforced supports as shown in the picture. Printed with 20% infill using PLA or PETG.
Printinted with PETG, 15 % infill, no supports. Attach Oxxe unit with double side tape. The second one is with the thread for M4 screw. Max deep is 15 mm.
Propeller cone with a diameter of 50 mm. Hole for an 8 mm shaft. Recommended to print with 100% infill using ABS or PETG. Enforced supports are required on the build plate. Designed for use with self-tapping 2.1 × 15 mm screws.
Wardrobe 25 mm tube holder (round or square) - snapping/sliding upper part. Printed with 15% infill PETG. Holes for 3 mm countersunk wood screw.
Netatmo Unit Holder – designed for attaching to cupboards or similar surfaces using double-sided tape, or alternatively, a second version allows for hidden screws. Printed with 15% infill in PETG.
Elastic holder for the ironing board. The hole diameter is 23 mm. Attached with double-sided tape. Made from TPU Sunlu.
Silica gel container (105×52×13 mm) for use in 3D printers, filament dry boxes, or cupboards. Printed with PLA (or PETG) at 15% infill.
Holder for Wera Kraftform – sada šroubováků Micro 2035/6. Printed with 20 % infill using PETG. Attached with double-sided tape in the desired location. Easily detachable from the holder.
Covers the top hole and allows the PTFE tube to pass through. Thanks to the rotating bowl, the tube can move partially freely. Printed with PETG or PLA at 15% infill. The bowl should be printed with a brim (one side has a slightly…
3D printer nozzle wrench designed to help unscrew the nozzle by hand. Printed from PETG with 20% infill, but the top part (approximately the top 20% of the height) was set to 100% infill in the slicer to ensure durability. A 7 mm socket…
A lightweight, 3D-printable servo cover designed for the Hobbyzone Super Cub S 2 RC airplane. The cover protects the servo area while maintaining the original appearance of the aircraft. Installation The cover is attached using a thin…
These are all currently available results.
