Counting matching models…
I needed a low profile mount for a Biqu Microprobe V2 on my current toolhead setup, this has been designed to fit behind my modified backplate for Bosco Lau's magnetic cooling duct . It should clear their original design as well. This…
With 3 angle options to choose from, this stock brings your top rail to you! I wanted to Carbine-ize my Venom Pro, but wasn't super satisfied with how any of the other stock options available fit my frame, so I made my own (with…
I printed the slide with the two “legs” that straddle the plunger tube on the build plate, this uses a bunch of support material, but should be the strongest. The knob should be printed on its side, requiring support on the part that goes…
A pretty basic part that blanks out the trigger safety on the X-Shot Pro Longshot. Installation requires some type of adhesive (I used hot glue) to retain these in place. Other than that, this should be a pretty simple install.
Follow the same print instructions for the standard priming rod. I used CC3D PLA Max for mine and it feels great in the hand.
Should be a straightforward print, lay the largest flat side down on your print bed, I set mine for 5 walls, 5 top and 5 bottom layers, which is pretty overkill. The hole on the top peg is sized to be tapped to M3, I used a screw and…
Simply print the tool, and press it over your tube magazine and follower when crimping the springs. This should form the springs to fit the tube magazine perfectly, and not require fussing with pliers and potentially damaging springs.
When I installed the MGN12H Linear Rail mod from @thisiskeithb, I found I had lost some Y-axis travel due to the bed jamming into the bearings on the front end of the Y-axis. Between that and my spaced forward Phaetus Dragonfly hotend, I…
I really liked the silly shell caddies designed by SC Designs, but I wanted to eliminate the bulk added by the Midlock 2. Having shell carriers rigidly fixed to a MOLLE rig reduces flop and makes a rig feel lighter when running, even when…
Fits double stacked Silly Shells with ease! Shells will snap or slide into place, and are held in place until needed (I have had heavier shells come loose from more rigorous movement) I personally prefer Zack Freedman's TPU folding MOLLE…
I wanted to use Bosco Lau's magnetic duct on my standard Ender 3, so I modified the backplate to support that machine.
A quick remix to add an o-ring between the aluminum barrel and the SCAR attachment, giving a reasonable boost in range.
A super simple T-pull for the Rival Knockout, both sides have notches to prevent spinning around the bolt holding them together. Printing instructions: Print one of each half, slicer settings really shouldn't matter for this since its…
Designed to print in TPU, this part slips over the bottom of the Longhorn extensions (designed to work with any of the 3 sizes) I've created a tall and a short version. The short extends up 30mm, and will fit onto any of the Longhorn…
Mega and MXL darts should pop into place with these holders. I've only tested fitment with Nerf Megas, not accufakes. The angled holders have a 10 degree rollback off center (for extra style, that's why!) I use M5 hammerhead nuts and…
Reversible, positive locking, top load-able, low hardware. These simple magazine carriers add tons of dense carrying capacity to your Silly shell loadout. Magazines slide up into the carrier with ease and are held firmly into place with…
These are all currently available results.
