Counting matching models…
UPDATE 06/27/24: I added a new design that does not require bearings and utilizes the center of the spool instead of rolling on the edges. For this version you will need 2 lengths of 4mm OD PTFE tube (you should already have this) to…
Extends the spool holder out to allow for the AMS to stay plugged in while you use it. I use this in conjunction with thrutheframe's improved spool holder: https://www.printables.com/model/278580-bambu-lab-spool-roller Print Instructions:…
I found the original coupler cap too loose on the ptfe coupling and my filament wasn't fitting very well in the hole. Since there wasn't a step file I just modeled this from scratch. Besides not following his design 1:1 the major changes…
Tested only with PLA Printed with .4 nozzle, .2mm layer height, 2 walls and Arachne enabled. The following changes were made to the original design: Extended out the mounting hole for more room behind indicator Added fins to allow for…
Replacement rubber foot for DeWalt squeeze clamps I printed in 95a TPU, .15 layer height and 2 walls. The overhangs should be no problem at TPU speeds.
Remix of TTF insanely good Bentobox design. All credit to him and a huge thanks for releasing the step file for this so I can add a switch. Opening measures 20.5 x 11.75. The opening was designed for these in particular:…
Adapter for a 24oz Takeya bottle to fit into a 2014 GMC Sierra's cupholder. This might work in other cup holders. Step file included as always to remix. I printed in ASA but I would recommend PETG as a bare minimum. Its a pretty snug fit…
I really liked the original designers model but wanted to implement a way to know what bits where inside when the cases were closed. I printed using my Bambu X1C with AMS. Open the STL in Bambu Studio, and while selected click the “split…
I wanted a convenient method to empty the bowl on my dynavap. I found that the debowling feature on @musicalbigfoot's dynvap slim stash model worked fantastic (linked below) but I wanted just a specific container for only debowling.…
Replaces the cheap paper box that comes with these small travel containers for qtips/cotton swabs.
This is a block/riser for a Bambu A1 Silicone Nozzle Wiper to be used on a Qidi X-Max 3. It is a little crude but has worked well for me for 100's of hours of wiping. The silicone pad should be centered left to right on the block and…
Modeled 1:1 from the mounting bracket you can purchase from Menards linked below:…
Wrist rest specifically for the Nuphy Node keyboards but this should work will any keyboard of similar height I would imagine. One version has recessed sections for the below linked grippy tape. It works way better than those little…
My sister asked me to design a solution to allow her to hang fruits/vegetables off the ground for her chickens to feed on. Print Settings I used 4 walls and 20% infill. I would use ASA If you don't want to keep reprinting from UV damage.…
Wall brace for securing your Brightroom (target brand) Wire Closet System to a wall. I created this because I had printed risers for my rack and wanted to make sure nothing was going to tip over. The parts “wall mount” and “clamp” are the…
Centering Gasket for a 3535 sized emitter. This was specifically designed for a Novatac SPL-120 but it would fit around any 3535 sized footprint and reflector with a similar sized opening. I would print out of high temp material and with…
Key to adjust the battery height component of the Fraz Labs Tiny Nugget (old model) The STL on their site did not fit my Tiny Nugget so I made my own. Screenshot of the dimensions below so you can measure yours before you print :) I…
These are all currently available results.
