1 / 1
The Ultimate Cereal Container Filament Drybox - Coupler Cap Remix
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the coupler cap - tighter clearance around coupling and looser clearance for filament hole.
- Rating
- 4.25 / 5
- Likes
- 20
- Downloads
- 190
- Makes
- 5
- Views
- 999
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I found the original coupler cap too loose on the ptfe coupling and my filament wasn't fitting very well in the hole. Since there wasn't a step file I just modeled this from scratch. Besides not following his design 1:1 the major changes are listed below.
Here is what's changed:
- 9.9mm coupling diameter (coupling should be about 10mm)
- 2.05mm filament hole diameter
- Redesigned the handle to make it even easier to print the overhangs.
If you would like to request any changes I am happy to accommodate; I have also included the step file to save you some time if you would like to remix yourself.
Print Settings:
- TPU 95a or softer
- .2 layer height
- standard settings (2 wall, 15% infill etc etc)
- NO SUPPORTS NEEDED