Counting matching models…
Insert to convert the Utopia Cereal Containers (with indentations) into a filament dry box. Desiccant box prints separately and snaps into place (so it can be swapped out or dried separately).
This is a center axle bracket that uses the existing bearing holder and axle. I added two different diameter axels to use for spools with larger or smaller center holes. Print Axels with supports as they are at a 30-degree angle to make…
Notes: print bearing cap as spiralized outer contour but sliced with X/Y 102% scale factor dowel: prefer standard 8mm wooden dowel over plastic print (plastic will most likely break at that small diameter) See also the FreeCAD model on…
English This is the third version of a holder for filament spools that is suitable for cereal storage containers. In principle, all plastic filaments are sensitive to moisture, i.e. hygroscopic. Some filaments are more affected than…
please use assembly made by valRC https://www.printables.com/model/1210752-dry-box-for-3d-filament-hygrometer-desiccant-direc
Desiccant Dry Box for Big W 3.8L Cereal Container. Sits under the spool. Hinge uses a piece of 1.75mm filament. I print using PETG, anything is probably fine though. Designed to print without supports. No screws or parts needed other than…
Larger size to fit the cereal box (116mm internal length). Pease do your measures as ymmv Based on [generic] AliExpress Cereal Box http://aliexpress.com/item/1005008932608933.html Should fit on printers with similar aluminium profile…
I wanted to make it easier to cut new hexagonal opening for PolyDryer Dual Port Adapter by @SparrowHawk_421862 (thanks for that design!). Original model has alignment hexagon template, but you need to position it carefully and secure it…
I created this modular holder for GunplaMark's Ultimate Cereal Filament Drybox, because I never liked the hygrometer hanging on top of the filament exit port (unstable angle against gravity). Instead, this mod allows to put some…
I wanted cheaper parts that I could easily source where I am, and modifying parts where necessary based on my experience putting it together. I am not using all parts used in the original, just the basics. Printed on Prusa Core One with:…
***IMPORTANT*** !!! There is also a free version of this model available !!! Purchase this model only as a thank you if You enjoy this design and find it useful! Free model Introduction There exist many different designs to use standard…
Convert your 4 l food storage container into a filament storage unit for 1 kg spools. This custom insert provides a base insert for the container that wedges the narrow section apart to provide more space so that the spool is not…
A hanger rail for fixing a filament drybox to a ceiling. I am using the rail to fix the filament drybox to a plank of the shelve that my 3D printer is located in to allow printing from the drybox. The files include the minimal design of…
This project allows you to convert standard cereal storage containers into practical filament dryboxes. The printed side mounts are screwed togheter through the container wall and support a Ø20 mm axle, allowing the filament spool to…
UPDATES: 01/03/26 - HERE IS THE BETTER V2 - CLICK HERE 22/02/26 - It didn't tangle but I'm still not happy, I think I may have over-engineered! Back to the CAD for V2... Will upload when printed and tested! 15/02/26 - Noticed one slight…
Remember to tighten the rollers properly, as if they are loose on the bearing, they can easily break. The rollers have a special cutout inside the thread to make them more durable. The Prusa settings I used to print the above set are in…
I had problem with the bolt from the original model keeps breaking due to its printing orientation. So I simply splitted the bolt from the rollder part and mirrored it to fit nuts on both sides.
I tried several other similar designs and found that they did not fit correctly for the cereal boxes I purchased, so I make a new one that fit my boxes correctly. These hold rectangular hygrometers as you can find here…
This part is designed as a solution for uncontrolled filament unwinding when using the spool holder by @tcosta. I currently use tcosta's solution on more than 10 dryboxes and I really like it. However, some filament rolls tend to unwind…
This is my remix of the A1 Filament Dry Box Mount (Cereal Box) by Maker Maverick over at Makerworld.com. This is used to mount GunplaMark's filament dry box design. The original design is for the Bambu A1 and has a locking mechanism to…
Edit : If you want to print this drybox, wait a few days, I'm finalizing an other version where silica gel don't go under the bottom part, and that support larger spool. I had a few problems with those from Overture that are slightly…
Must use TPU. .2 layer height. .4 nozzle. This lid creates an airtight seal without needing supports. Alternate model has octagonal design to match the bottom of the cereal box.
Curved Hygrometer Holder for Modular Cereal Box Drybox A hygrometer holder for the Modular Cereal Box Drybox by joncruz that actually looks like it belongs there. Why another hygrometer holder? The existing holder by charno works, but its…
A set of caps for the original lid of the popular cereal boxes with a hexagon on the lid. The caps include a compartment for a small piece of sponge to act as a dust filter and are designed for PC4-M10 fittings. The threads shouldn't…
This is a remix of GumpaMark Filament Storage 2026 , modified to fit the Temu 4.5L “cereal box” style container. What this remix changes Fits Temu 4.5L cereal box container Designed for a 220×220 mm bed Inner part: prints as 1 piece Outer…
A simple stand to hold (press-fit) and display these 2022 General Mills Monster Cereals figures designed by pop artist KAWS. Holes for bases are 47x10x3mm. If you want a label or inlaid text on the base (as in the photos), use PrusaSlicer…
Remix for added ease, speed, and durability - model dimensions and assembly all are the same as the original. No supports needed. 2 options. This is my first remix, so support, downloads, makes, and shares are greatly appreciated!!
My 1st design and Post! Recently I adopted the Amazon Cereal Box solution for filament storage. I couldn't find an adequate way to label the storage containers and the chalk marker just seemed a little too simple and rubbed off. With some…
Hardware Required Part Qty. Link to Example M5 Heatset Insert 4 https://www.amazon.com/dp/B0C4GV8XDX M5x25 Screw 4 https://www.amazon.com/dp/B07ZKGYBW7 608 Bearing 8 https://www.amazon.com/dp/B08XVFSZTF Assembly Instructions Base Assembly…
I found @GunplaMark_876550 's Filament Dry Box with Rollers and really liked the concept, except that there was too much resistance in the roller system, especially with TPU, and would cause under extrusion. I then found @tcosta_240835 's…
Insert to convert the Utopia Cereal Containers (with indentations) into a filament dry box. Desiccant box prints separately and snaps into place (so it can be swapped out or dried separately).
English For long time storage of filaments that are very sensitive to moisture, i.e. hygroscopic, storage boxes for cereals, etc., which are insulated airtight by rubber seals, are very suitable. However, these filaments must also remain…
After seeing a video from my mutual @4thelore on TikTok and talking to the designer of the cereal box, Barry Gingell, on Twitter, I 3D modeled Syril Karn's cereal box for the blue “Crunchies" cereal seen in season one of Andor!
This is a new design for the desiccant bin of the cereal box filament dryer
Parametric hub adapters now available. Description This is a drybox I have been working to make on and off for the past… year now (eeek!). Since getting my Neptune 4 Plus about six months ago I started focusing on the design and getting…
Description Now version 1.1 Here is a desiccant holder for my cereal box drybox . Slots in for refilling or replacement. The lid can be opened while in place, so no need to remove completely to empty and refill. Since I might use my…
Description A lid and clip for my Modular Cereal Box Drybox that has the fitting inset so that they can be stacked when not in use. For storage/stacking remove the PTFE tube from the PC4-M6 fitting and use the supplied clip to hold the…
This is a lid adapter for the utopia cereal boxes on amazon that houses a bowden tube connector. The connectors that were used were these: https://a.co/d/5SXa7fk and the cereal box that it fits is the 4 liter 4 pack of these: Amazon.com:…
Original https://www.printables.com/model/952313-filament-dry-box-with-rollers He has a good YouTube video showing assembly, I ended up assembling completely differently, everything I used is on this remix. (see assembly below) If you…
I tried to print a few cereal boxes that claimed to fit the KICHLY cereal boxes I bought from Amazon in late 2024, but I guess at some point they changed the design and old models don't fit anymore. This is my own design to fix that…
I couldn't find any snap-in-place desiccant boxes for my specific cereal container. I also wanted something I could leave inserted and add/remove the silica gel. These ******* get everywhere. No glue or other materials required One piece…
This is a shelf that utilizes the existing holes in the side of the enclosure that supports the common cereal container filament dry box setup.
3D scan of a cereal box. This is not a perfect scan. Some areas have imperfections. But good enough for the most cad work
Filament Dry Box for Amazon Cereal Containers This is a custom-designed filament dry box made to fit the standard cereal containers available on Amazon. After experimenting with several popular designs and encountering various challenges,…
A variant of @dkrnet s design to fit into the silly cereal-boxes¹ I once bought. (I liked the design with the single ball-bearing clipped in.) It uses 55 mm aluminium-axels. You need 4 rollers, one body, two 608 bearings and two 55 mm…
A hygrometer holder for Plastic House cereal containers. This fits these hygrometers and these cereal containers .
Among the 1000 models for small thermometers, I couldn't find one for my model. My requirements are really low. I just needed something to keep the thermometer standing upright. So I designed this one. Made for thermometers between 40 and…
A remix of the humidity holder to fit the ones with a beveled face from the likes of AliExpress . I recommend printing 2 of these (one for each end) as it holds it very securely. Easy print with no supports if printed on its side.
This is a remixed (and expanded) set of tags for GunplaMark's Filament Dry Box with Rollers. They are thicker and with an increased chamfer so they fit snugly in the holder. I also made several more variants. The 3mf file is included for…
Printed in one piece on a Bambu P1S. Works great in PLA and HF PETG. I used my “sloppy” settings - 10% infill, 2 perimeters, and 4 top/bottom layers.
I simplified the needed parts for my use case. I use it with the container standing up normal with a desiccant tube inside my rolls. I usually print from my AMS on my P1S so I don't need to print from a storage box. and If I do need to I…
English For the storage of moisture-sensitive, i.e. hygroscopic filaments, inexpensive 4-liter storage containers for cereals, etc. are often used. These usually have a rubber seal that provides largely airtight insulation. In order not…
This is a remix of Redbluefire's excellent spool and desiccant holder for cereal dry boxes. Update 3/17/25 - I've posted a simple PTFE tube connector for connecting the PTFE tube of the dry box to the PTFE tube in the printer. I split the…
This project is a spool core that enables the user to rewind the excess filament that is hanging out of a cereal dry box once they are done using that filament and unload it from their printer. It also doubles as a desiccant holder spool…
Desiccant bead holder for plastic cereal box.
Spool guide that can be extended from 78mm to 90mm Parts required M3*10mm 4ea 2. 608zz bearing 2ea M4 L-wrenchr: For assembling the M8 bolt drill, screw driver Parts that need to be printed in two washer tickness4.2mm_holder OR…
Regarding the original-original design, I like the idea of gluing the base to the inside of the lid. However, I didn't want the mesh to be permanently glued as well. Regarding the original of this remix, I liked the idea of using bolts to…
The gasket is designed for a 63.75 mm diameter hole, whose center is to be located using the provided template. When using the template, please make sure it sits flat and the arm is not bent, so the hole is properly located. I used a 2"…
This is a note to let people know I am working on a substantial upgrade to this system. There will be no original parts on v2.0. These models can be used to create a filament dry box out of a KITCHLY cereal container, as is affordably…
This print snugly fits onto the throat of the small lid of common 4L cereal containers. You can add super glue if your print is a loose fit. You can now easily add & remove desiccant to the container. Humidity drops much faster than those…
This is a shelf for the Filament Dry Box with Roller that is for the RepRack Spool Holder uses only 38 grams of filament. it hooks into the the standard ½" / 19mm conduit size, making it very stable.
I looked around for a hydrometer mount plug for the cereal boxes used, there were a few, but in end decided just to design my own. These ‘plugs’ allow the round hydrometer to be mounted. The hydrometer is a tight fit, but not too tight.…
I made this lid from scratch after printing the original model. The sealing now fits the Vtopmart 4l box (and most likely all Amazon clones) very well (diameter is 60.5mm). I also added a stop for the PTFE tube as mine got slowly sucked…
This is a remix that adds a taper to the base 71mm rollers
Remix of Filament dry box cover for PRAKI cereal containers with two PC4-M10 connectors.
The advantages of this filament spool holder combined: resource-saving, only 39g filament, printing time 1h14m (on CoreONE) easy printing without supports, even on small printers with 180mm² without gluing, without screws, without…
Loved the idea of the original cereal container desiccant dry box lid but the design had many sharp edges and such tight tolerances that I hurt myself trying to remove the sensor. So i redesigned it with higher tolerance and chamfered…
These clips perfectly fit the old-style Kitchly/Utopia cereal boxes and allow you to add a label. They fit the outside of the box and in the middle so you can still have space to line up all the boxes. Plus they are magnetic so if you…
Raised rollers fit for Great Value Brand cereal boxes. You'll need 608 bearings if you want to use this.
This remix is meant to go into the front of a Chef's Path 4L cereal container - I use these as individual 1 kg spool dryboxes, but couldn't get a humidistat to stay put so I could read it. This design fits in front of the spool at the…
This model includes a key switch. Something you find in computers to make the satisfying clicking noise. Key switches can be found on amazon. This print does not need any supports and is fairly quick. On my Anycubic Kobra 2 Neo this print…
Why another Hygrometer holder for a cereal container? I wanted a model that fit well. Others have had to tune theirs or rely on hot glue. Grip fins solve this problem. For me, this has a satisfying click when inserting the hygrometer into…
I have made the (bearing adapter) for 2 types of bearings, 1 is for 607 Bearing , and another is for RC car 15*10*4mm Bearing . Roller included a STEP file that you can make some tweaking for fit your spool width, and the size for your…
Besmall cereal bins are amazing for keeping our cat food fresh, but the lids have a bad habit of cracking. This lid locks on just like the original, and is much more durable.
I modeled this after none of the prints I made would thread a PC4M10 pneumatic connector. After a little time spent researching thread pitch, I came up with this model, which will thread a PC4 without any post print cleaning or…
An inset cap to be used with the cereal box found on Amazon. I designed this after finding out that most of the models of this variety have incorrect threads and require post processing to work. This model requires NO post processing. It…
NOTE: While still in use by a lot of people, this version of the drybox system has been deprecated in favor of the updated one here: My previous filament drybox model became more popular than I ever imagined, and after taking on a lot of…
VERSION 1.1 - 29/05/2025 - Fixed a small lip on the model that might cause printing issues. Remix of the The Ultimate Cereal Container Filament Drybox designed found here…
Test Print Print the file called Tolerence Test Piece as well as a single copy of each of tolerences for roller support as well as the roller insert Choose the tolerence that fits the best within the test piece making sure you are testing…
Here is my design for a Cereal Container Fry Box Storage Sled Went through a few different designs to come up with this final one Should fit all size spools and center nicely in the container Printed on K1Max Designed to fit perfectly in…
I was looking for a space-saving way to store my single role filament storage boxes ( Single Spool Dry Box & Single Spool Dry Box - Variant 2 ). As I had an Ikea Skadis wall mounted, it quickly became clear that the boxes should be hung…
The base is split to allow it to print to smaller printers, such as my A1 mini. Please like and collect to understand that you have enjoyed the print, please comment if you have any issue. The STEP file is included so you can also…
This is a center axle bracket that uses the existing bearing holder and axle. I added two different diameter axels to use for spools with larger or smaller center holes. Print Axels with supports as they are at a 30-degree angle to make…
Tray for Utopia Kitchen Cereal Containers (https://www.amazon.com/dp/B0BHVT9PV1) to hold a hygrometer and silica beads. Remixed from https://www.printables.com/model/1095426-2024-utopiakichly-cereal-box-spool-holder-ptfe-no and inspired…
This replaced the PC4-M10 Bowden couplers with UBBI connectors. I have included an updated jig that has two key slots which will help you keep the connector vertically aligned. Printing: 0.2 layer height. For the UBBI I prefer to use 0.12…
TL;DR Print with 0.20 mm layer hight, 0.4 mm nozzle, no supports. Printing version 2: 1x bottom frame, either with one or two connectors 1x inner frame (better choose a slow profile, it tends to warp due to low bed adhesion on front side)…
I was annoyed with everything falling apart, so i made this to lock in the axle in my dryboxes. Specifically made for this model: https://www.printables.com/model/952313-filament-dry-box-with-rollers The sloped angle in the file was added…
This holder slots into the original lid flap. The two parts simply screw together. This keeps the box as airtight as possible while also enabling easier servicing of the desiccant. It can now be swapped in a few seconds and even dried…
Adjusted the original model to allow for more magnets and wider stance to allow cereal boxes aswell.
Bottom feed desiccant holder for cereal box drybox. This is intended to be used with a top-mounted drybox shelf such as Drybox shelf for Anycubic i3 Mega by clickbangdead . It should fit the cereal boxes used for dryboxes like: Dry boxes…
Very minimalist cerealbox adapter for the polydryer system - acts as a plate. Its very easy to just grab the bottom of the cerealbox including the spool in ‘one grab’ and place it on top. The hole in the center will stabilize the spool,…
it has been customized in 60x60. Please print upright, without support.
I remixed Badger's Center Roller holder to use ManelTo's Spool Auto-Rewinder for use in GunplaMark's Ultimate Cereal Container Filament Drybox. So a remix to combine other mixes… which would be more mixed than a remix… or just mixed up?…
Auto-Rewind in a Cereal Drybox Cereal container dryboxes are an elegant way to store filament. Auto-rewinders prevent tangles and eliminate the need for filament buffers. Porque no los dos? Space constraints. @Jerrari 's Auto-Rewind Spool…
There are many solutions on Printables for dryboxes using these common cereal containers. I feel that most are overbuilt by using festo fittings and roller bearings. This drybox solution does not require any hardware nor any drilling…
I tried many different variations of a dry box spooler system. All the ones with printed rollers caused the spool not to roll correctly. The ones with metal shafts caused the spool to become misaligned and not stay centered. Every design…
