All models

Counting matching models…

PrintablesAnuragD

Multiboard Hammer Mount - Or Other tools

Remix of the modal to fit the multiboard plates properly. PS: The hooks are designed to be fit tad bit loose

Downloads: 1,037
Likes: 83
Rating: 4.5

Order a print of this model

PrintablesAnuragD

[Multiboard] Hanger Hook

Sturdy hook to hang small or large items. It comes in 3 sizes.

Downloads: 879
Likes: 103
Rating: 4.82

Order a print of this model

PrintablesAnuragD

Gridfinity/Multiboard CR/LR 2032 2450 Bins

Gridfinity bin model that is capable of holding 2032 and 2450 batteries. Combined with Multiboard Gridfinity Adapters it is multiboard compatible as well. I use them to store rechargeable coin cell batteries that I bought from amazon. If…

Downloads: 465
Likes: 69
Rating: 5

Order a print of this model

PrintablesAnuragD

[HSW/Multiboard] WD40 Can holder

This holder is to hold my WD40-Sprays 2 Ways can on to my HSW wall. But it will also hold any can or object that is 65mm wide or smaller. There are files to support HSW Mounts using full hex snap Multiboard Snap Multiboard Stud Model also…

Downloads: 456
Likes: 60
Rating: 4.6

Order a print of this model

PrintablesAnuragD

Dual Tone: Your Lack of Planning is not my emergency

I preferred dark backgrounds with bright overlays. Printed with Sunlu Meta PLA Black and Elegoo PLA+ LavaRed

Downloads: 291
Likes: 152
Rating: 5

Order a print of this model

PrintablesAnuragD

Low Polygon Heart - Flat Base

I needed something to complete my decor on the wall. A low poly heart perhaps. Found a great model from another fellow creator, but it was a complete 3d model. I was looking for something with a flat base so that I could mount it. So I…

Downloads: 287
Likes: 12
Rating: 0

Order a print of this model

PrintablesAnuragD

Creality Sprite Extruder Pro / Ender 3 / S1 / S1 Pro BTT Eddy adjustable Mount

BTT Eddy is a tricky unit to get right. The requirement of the probe to be sitting 1.5-2 mm above the nozzle is a hard window to hit for different nozzle and hot-end configurations available for ender 3 (sprite extruder) models. I have…

Downloads: 272
Likes: 34
Rating: 5

Order a print of this model

PrintablesAnuragD

BTT / BigtreeTech HDMI5 v1.2 Display mount for Ender 3 / S1/ S1 Pro

None of the offerings on printables so far, prints without significant support or needs an extremely tuned machine. Great designs that are relatively easy and reliable to print, don't come in version that supports v1.2 screens or are not…

Downloads: 184
Likes: 21
Rating: 4.67

Order a print of this model

PrintablesAnuragD

Red Circle Puzzle - With a Customizable box

I used to play with this puzzle when I was a kid. Loved the thought process behind it. Hope you enjoy it as much as I did. I got this puzzle originally as a gift. I broke some of the pieces, now thanks to 3d printing, I get to recreate it…

Downloads: 177
Likes: 54
Rating: 0

Order a print of this model

PrintablesAnuragD

[MultiBoard] Tape Gun / Dispenser Holder

Multiboard snap / screw in compatible mount for holding the tape gun/dispenser

Downloads: 177
Likes: 21
Rating: 5

Order a print of this model

PrintablesAnuragD

Sovol SV08 BTT HDMI5 v1.2 Tilt Display Mount

Downloads: 161
Likes: 26
Rating: 5

Order a print of this model

PrintablesAnuragD

Marble Maze : Dual Tone

Great toy for leisure play. If the path is getting too predictable, then just rotate the board 90 degrees and there is a whole new pathway to solve (same pathway from a different perspective). Joyful game for hours. Original model has a…

Downloads: 139
Likes: 21
Rating: 0

Order a print of this model

PrintablesAnuragD

[Multiboard] Modular and Extensible Spool Storage

I have been trying a lot of filament mounting systems. I was unable to find something that required minimal printing and can be done quickly and at scale. Each set can easily hold up to 5 x 1KG spools. Fully extendible and modular system.…

Downloads: 138
Likes: 29
Rating: 4.5

Order a print of this model

PrintablesAnuragD

[HSW] Tool holder

Last holder you will need for thin long items. Modified version of the original to fit into HSW wall mount.

Downloads: 129
Likes: 25
Rating: 5

Order a print of this model

PrintablesAnuragD

[Multiboard] Solder Spool/ Reel holder

Allows you to hold solder spools with outer rings (spool rings) that are from 1mm to 6 mm thick. It can hold spools from 50-65mm in overall diameter of the spool itself. Depending on how heavy the spool is, Ensure enough walls are added.…

Downloads: 120
Likes: 16
Rating: 5

Order a print of this model

PrintablesAnuragD

[Multiboard / HSW] Plastic Scraper Holder

Quick printing and easy access to the plastic scraper on Multiboard and HSW

Downloads: 120
Likes: 18
Rating: 5

Order a print of this model

PrintablesAnuragD

Door Corner Decor: ELK edition

Remixed the great original model to fit my smaller build plate Ender 3 S1 Pro or similar build plate (235x235)

Downloads: 110
Likes: 43
Rating: 5

Order a print of this model

PrintablesAnuragD

Missing Piece (742 Puzzle) - 2 Plus Signs

Note: Print 7 copies of the piece to make up all the required pieces of the puzzle. Can you make a second cross just out of 3 pieces? Happy re-arranging. Credit to the original designer: Lucie Pauwels

Downloads: 95
Likes: 11
Rating: 5

Order a print of this model

PrintablesAnuragD

HSW/Multiboard Magnetized Bit holder for 4 mm (small) and 1/4 inch bits (Large)

Add your most used bits to your HSW setup. This supports 4 mm (Small) bits for precision work and 1/4 inch bits as well.

Downloads: 81
Likes: 23
Rating: 0

Order a print of this model

PrintablesAnuragD

[Multiboard] Spatula holder

Needed to put my spatula onto multiboard base plate. Could not find a direct compatible model at the time of writing. So I adapted the great and simple design made for HSW, into Multiboard compatible mount.

Downloads: 73
Likes: 11
Rating: 4

Order a print of this model

PrintablesAnuragD

[Multiboard] Multi Bit Screw Driver Holder

Multiboard holders and slots to store the screw driver for easy access

Downloads: 66
Likes: 15
Rating: 0

Order a print of this model

PrintablesAnuragD

[Multiboard][HSW] USB Voltage Tester Holder

A handy holder to store your voltage tester. Nothing fancy, just useful, quick and efficient storage print.

Downloads: 61
Likes: 10
Rating: 4

Order a print of this model

PrintablesAnuragD

Multiboard Brush bit holders

Remixing to mount these beautiful holders to a multiboard.

Downloads: 53
Likes: 13
Rating: 5

Order a print of this model

PrintablesAnuragD

[Multiboard][HSW] Soldering Fingers Holder

Adding snap or push fit mounts for HSW or Multiborard to store soldering fingers

Downloads: 50
Likes: 16
Rating: 0

Order a print of this model

PrintablesAnuragD

Hex wall rotated insert - trimmed

Rotated insert for people who have installed their HSW wall with pointy side up. This remix just makes the adhesion a bit better. Original model has a lot of small parts that are not printing well at large volumes. So trimming the base a…

Downloads: 48
Likes: 4
Rating: 5

Order a print of this model

PrintablesAnuragD

Monopoly Deal Storage Box

I needed a storage box for my Monopoly Game Cards that was personalized and can stack with my other card based game boxes. I have many other card game storage boxes that are precisely made for the deck of cards in the game. They are…

Downloads: 42
Likes: 10
Rating: 0

Order a print of this model

PrintablesAnuragD

[Customizable] Gridfinity/Multiboard 9 Volt and Coin Cell Battery Charger

I have rechargeable Power owl 9 volt batteries that I got from Amazon and have been laying randomly around the house. With Gridfinity adapters for Multiboard I am able to hang up handy gridfinity bins on the wall and it has become an…

Downloads: 36
Likes: 3
Rating: 0

Order a print of this model

PrintablesAnuragD

Mattress Stopper - Prevents mattress topper from slipping

I could not find a hard enough thick mattress to properly support my back. So I use a flat floating solid bed frame with a 4 inch mattress topper. My back pain is better, but the solid smooth bed frame and silk like mattress cover just…

Downloads: 35
Likes: 7
Rating: 0

Order a print of this model

PrintablesAnuragD

Every Family Has a Story... Welcome to Ours!

We saw a print sticker on Amazon (link below) with this text and fell in love with it. But we wanted it to be more pronounced, customized and something that we did by ourselves, so, we found the fonts for the design, highlighted “STORY”…

Downloads: 34
Likes: 4
Rating: 0

Order a print of this model

PrintablesAnuragD

Ground Stake

Exporting STL file from the original 3MF and redesigned STEP file for further customizations and modifications per someone's needs.

Downloads: 15
Likes: 0
Rating: 0

Order a print of this model

PrintablesAnuragD

[Customizable] HSW/Multiboard Opple Light Master Sensor holder

I bought Opple Light Meter light sensor from amazon recently to match the lightining to day light and I have fallen in love with this product. It was laying on a table since then and I wanted a storage spot on the HSW wall, So I made one.…

Downloads: 15
Likes: 3
Rating: 0

Order a print of this model

PrintablesAnuragD

Task Priority Organizer

My workload became overwhelming, making it challenging to stay organized and focused. I experimented with various digital to-do list apps, which initially helped but eventually led to a clutter of tasks and groups, causing more…

Downloads: 14
Likes: 1
Rating: 0

Order a print of this model

These are all currently available results.