Counting matching models…
After using the V2 for some time, I've figured that the model is a bit unstable, and the tooth brushes had a tendency to slip from the hexagon grid, I also had the need to add another toothpaste holder. So, I've tried my best to improve…
These are made to add to architectural models, in order to give them some ambiance, if you're an architect you'll understand the need for this kind of objects! The models were designed with simplicity, practicality and printability in…
Print with 3 perimeters, 20% infill, use snug supports to the bolt holes. Use M4 bolts and nuts to attach everything together. This works perfectly with the SV08 Filament runout sensor holder from dmika7200 . EDIT: I completely…
This model is an alternative to all the Top Hats out there, it is a direct copy-paste from the bottom “milk crate” part of the machine, all the alignments and measures match the existing ones in the SV08. There are 2 versions: “Long” -…
This model uses only the existing holes in the frame of the SV08, it also uses Sovol's magnetic fixing system and handles. Although the magnetic fixing system has ben redesigned for a sotfter close, using only magnets, bolts and printed…
Throw your door wedge away! This hindge door stopper is here to stay! This keeps the door opened at a 90º angle, by serving as a spacer next to the door hindge. I saw something similar in a shop and thought “I can make this!”, after a few…
With this mod, there are several opportunities for mounting various fans up to 180x180, its made of 2 separate parts, that fit using M3 bolts/nuts. If you validate this mod, or have any suggestions or improvements, please let me know.…
The filenames have "x1" or "x2" depending on the number of units that have to be printed, they are positioned with the advised printer orientation. The file with "everything" has all the needed parts with some supports for better printing…
I print them in PETG, for a better resistance. If you use it in a dry/hard soil it might brake.
The ikea HEMNES drawers cannot stand much weight without the bottom fall off. So I have designed a support to be screwed in the bottom, avoiding it to happen, just like some other ikea models. PETG is a solid choice for this one!
Just another bumper for the parrot minidrone, this one is steadier since its one piece. I advise you to print it in PETG because its more flexible than PLA.
Print in PLA or PETG, just glue it to the charger with a double face tape.
We know that the better the alignement between the charging pads, the better and faster the charging, with this in mind, and tired of missing charges because of misalignement of the phone over the pad, I decided to create a pad that…
Print it (ASA or ABS is advised), assemble it using a used prusament spool and 4 zip ties, fill it with dessicant bags, throw it into your filament spool box, with the other spools. When it gets wet, throw it into your filament dehydrator…
These are all currently available results.
