Sovol SV08 Doors (JLS Mod V2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model uses only the existing holes in the frame of the SV08, it also uses the original files published by Sovol.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 557
- Makes
- 10
- Views
- 2,558
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This model uses only the existing holes in the frame of the SV08, it also uses Sovol's magnetic fixing system and handles. Although the magnetic fixing system has ben redesigned for a sotfter close, using only magnets, bolts and printed parts.
The DXF is included for cutting the pannels to measure.
The filenames have "x1" or "x2" depending on the number of units have to be printed, everything is positioned with the advised printed orientation.
It is advised to print in ABS/ASA, it is advised to print the washers in TPU for avoiding cracking the pannels.
BOM
8 20x10x3 magnets
36 M3x8-10 bolts
4 M3x40 bolts
16 M3 nuts
ATTENTION: This model isn't tested, I'll be posting pictures of everything assembled once I get the pannels cut and the parts printed, in the meantime I'll be open to any feedback for improving this model.
Don't forget to add the enclosure pannels!
Thankyou to Richard Ferrington, Mathew Clark and 3DPrintDemon for all the feedback and testing.