Counting matching models…
I tried another spool winder but found it finicky and delicate. I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable winders Why pick this model: Prints…
The original is amazing, I rebuilt it in CAD in preparation to organize my own box of cables. There are a few tweaks that I think are nice: Bigger clearances The hinge won't stick or break as easily Different latching mechanism More…
Untested work in progress
This is an barely tested mockup, it seems to work fine but I haven’t run a full spool through it Here’s a link to the motor. I used 8mm m3 screws. https://www.amazon.com/Greartisan-Electric-Reduction-Centric-Diameter/dp/B08D3SSG55/ I…
This is a remix of falangy's bunny ring holder with an improved tray to fix an overhang issue. I’ve also set the bunny back from the center of the tray I have a few other similar remixes: Cute bunny (you are here) Sleepy fox Dancing fox…
This is a remix of @Macroglossum's dancing fox model with the addition of a tray to serve as a ring holder I added a pair of 1.75mm bores to the legs to trigger the slicer to generate reenforcement I have a few other similar remixes: Cute…
This is a clean and simple reimplementation of a popular stand for the BambuLabs AMS unit Why pick this model: Securely stack multiple AMS units on top of an X1C Fusion and STEP files are available, remixes welcomed Ready to use after…
To do: Change spool_max_ID in the main project so this shim isn’t required
This is a folding, print in place watercolor palette. I developed this because I wanted a tray with fewer paint wells and more mixing spots than any of the trays on Amazon Let me know in the comments how it works for you and if there's…
I designed this air scrubber to use a minimum of special parts. Build it today, no magnets, brass inserts, or high performance fans required! Read here about why you should have an air scrubber:…
This is a remix of @DavidPgc_775142 's sleepy fox model with the addition of a tray to serve as a ring holder Fits well in a Swarovski box if you scale it to 77mm I have a few other similar remixes: Cute bunny Sleepy fox (you are here)…
Servo splines suck - they're a mess of undocumented, almost-compatible manufacturer specific variants that are too finely featured to print anyway. Instead of trying to match any specific spline geometry I've added some slots so the gear…
Replaces pieces used in the Nina Ottosson interactive treat puzzle dog toys marketed in the US by Outward Hound https://outwardhound.com/brands/nina-ottosson/ So far this includes The white bone used in the “Dog Brick”, “Dog Tornado”, and…
The dimensions of Pred's bins are a little different from Zack's and don't quite fit into a baseplate I designed to the gridfinity.xyz specifications. In the process of troubleshooting this.
Post your make, that’s what keeps me motivated to create! Feedback and suggestions welcome as well!
Work in progress, don't expect this to work without modification Post a comment if you see a better way to do this. The idea is to spread friction across the entire surface of the spool so it doesn’t saw through the PLA as quickly. With…
This is a remix of @MZ4250’s gargoyle model with the addition of a tray to serve as a ring holder I have a few other similar remixes: Cute bunny Sleepy fox Dancing fox Gothic gargoyle (you are here) Leave a request in the comments if…
I think handscrew clamps are neat so I made one. Assembly instructions: Match the symbols on the pins with the symbols on the jaws and insert them in the matching holes With the jaws flat on a table, pinch a screw between them and twist…
Post your make, that’s what keeps me motivated to create! Feedback and suggestions welcome as well!
This is a tray that slips over the arm of an Ikea Morabo or similar armchair to provide a flat spot to set your drink or use a (tiny) mouse It's sized for a 135mm arm width and can be scaled to fit other chairs How to contribute: Post…
I designed this to support my A2 pulley ligament after a bouldering injury. I do a lot of typing in my day job and this enabled me to continue working while the ligament healed This model is freely adjustable and doesn't compress the…
I already had a photography tripod and didn't want to spend the floor space on a separate painting easel so I made this adapter. I've seen a similar concept called a “Gurney Easel” in the context of watercolor and plein air, so there's…
This is a long divider insert for the large DEWALT ToughCase+ DWAN2190 I've tested this with DWAN2190 - https://www.amazon.com/dp/B07Z6XBYJT I recommend using a hard TPU filament, for example Priline 98a, printed with at least two…
This is an adapter to use Dyson stick vacuum accessories with a Hilti VC 40-U industrial wet/dry vac. This is useful if you need to pick up large quantities of fine dust that would clog a household vacuum The Hilti vacuum is available for…
This is a divider insert for the DEWALT ToughCase+ bit cases It's suitable for separating small parts like m3 screws and nuts but thin objects like m3 washers will slide under the dividers I've tested this with DWASTCASEBLK and DWAN2190 -…
This is a deep bin insert for the DEWALT ToughCase+ bit cases It's suitable for separating small parts like m3 screws and nuts but thin objects like m3 washers will slide over the lip if the case is inverted I've tested this with…
Post your make, feedback, or request in the comments!
Designed for the Kungsfors wall rack https://www.ikea.com/us/en/p/kungsfors-wall-rack-stainless-steel-80334919/ Requires a small amount of flex. PLA+ and PETG are both suitable Feedback appreciated!
This is a 18650 battery holder insert for the DEWALT ToughCase+ bit cases. It also fits 18350 and 21700 cells I've tested this with DWASTCASEBLK and DWAN2190 - https://www.amazon.com/dp/B0BB162LNC - https://www.amazon.com/dp/B07Z6XBYJT I…
Ever want to screw some hooks or whatever into the side of your shed but can't because it's plastic? Add a rail of dimensional lumber with this bracket! I printed in ASA for temperature resistance, PETG would be fine too
It's an alternate platter for @RagingRoosevelt 's horizontal spool holder
Drill a 5/64 hole into the injection port scar and affix the lug with a #4 wood screw Doesn't work great on the Flight UTS-35 "ultra travel ukulele", the balance point is too far towards the headstock.
Print with 100% concentric infill
This is a hook to hang stuff from 2x4 rafters. Print it from something that can withstand heat and cold.
These are all currently available results.
