Counting matching models…
basic hinge, uses M3x35 for the pivot, M5 mounting bolts Print Settings Printer: BLV MGN CUBE Rafts: No Supports: No Resolution: 0.2 Infill: 70% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: 3D Printer Parts
Basic PCB vice. 100mm wide jaws, 90mm opening. Print one of each part, except the rails which you need 2 of. M3 nuts and bolts used to hold it all together Category: Electronics
Any material does the trick. Category: 3D Printing Tests
Seal/Anti-vibration gaskit for the BLV MGN Cube metal kit, used on an opening lid. Print Settings Printer: BLV MGN CUBE Rafts: No Supports: No Resolution: 0.1-0.2 Filament: 3dFillies TPU/Flexi Notes: Print Corner pieces with high infill,…
A pivoting mount for the 12864 LCD smart controller. Has 2 fields of motion and can be locked in place to maintain position. Uses a m4x50mm bolt and 2 nuts for the horizontal rotation, and 4 m3x20 to hold the back of the case on. 2 Knobs…
Enclosure for Ramps 1.4 and Arduino Mega 2650. Attaches to 3030 V-slot with 5mm bolts and slide nuts, all other hardware is 3 mm (12 bolts, 9-12 nuts). The variation in the number of nuts is due to variation between printers used.…
A basic machine to help wrap Clapton style coil wire like aliens, fused claptons, staggered claptons etc. requires a length of 30mm x 30mm pine and a tube with an inner diameter of 8.5mm. There is space inside the output axle collar for 2…
simple upper support bracket for z axis lead screws. I found print improvement on tall prints above 400mm as the lead screw started to wobble with fast machine movements. Suits a bearing with 16mm OD, 8mm ID, 5mm thick Mounts with M5x10…
3 pieces to help brace 3030 V-slot 3D printer frames Nema 17 stepper retainer for Y and Z axis to be used in conjunction with T Bracket to brace vertical pieces. T bracket requires 2 M3x30 bolts and nuts and 2x 4.8mm Cable/zip ties per…
Alternate front panel for the BLV MGN Cube to suit paneldue 4.1 and 3x neopixel rings. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Category: 3D Printer Parts
Extremely low drag filament roller for 3030 t-slot extrusion. Allows the helix in the filament between the spool and the extruder to be visible with a full kilo roll. Requires: 16 3x8x4mm bearings as the rollers 4 8x16x5mm bearings as…
A redesign of the blockshield for the BLV MGN Cube metal kit to suit the e3d v6 hotend and dual 5015 blowers. Two versions are included, one that mounts the fans in the same position as the original, and another that lifts the fans above…
Mounting box for 240V switches to make turning your printer and attached pieces on and off a simple process, I used 2 3m extension leads, one for each switch. One controls my 3D printer, the other controls the LED lighting, extra fans,…
These are all currently available results.
