Counting matching models…
No supports required. Scale : An adult's handful but if you like to grab it at the hole - I recommend to proportionately scale it to the size of your preference in your slicer. Print Settings : 0.4 mm Nozzle Heat Bed : 65 Degrees Nozzle…
I wanted to print it with Dual colors in Blue and white as the original dragonair is Primarily colored but since I was out of stock I had to make do with other colors. P.S - I forgot to add the horns to my print so I reworked the Tail and…
I printed this piece in Yellow TPU. Should look great in Black or Red too. It is the only Filament available at my disposal currently. :) Should work fine with any other filament.
Tetragrammaton - the Hebrew name of God transliterated in four letters as YHWH or JHVH and articulated as Yahweh or Jehovah . Considered one of the most powerful protective amulet existing since ancient times. Used by Sorcerers, witches…
This will be a good bed-leveling test as well. I can bet you would not want to miss watching the beautiful pattern as it gets drawn in. Instagram : https://www.instagram.com/ivinnayayoesel/ Metatron's cube is made up of 13 circles that…
Uses tree support with low infill on gcode. Also uses Raft for Foot adhesion. Feel free to turnover and print using .stl file if that is better for you. :)
This was the 3rd version after having bridging issues with a wider container. The model will work at varying scale as per preference. I would recommend printing it a bit bigger and with thicker walls if you really want to store a lot of…
Place an extra stand below the feet to have more stability.
Separate character piece model of “Zeno” from my "Zen Garden" contest submission.
I printed it with 20 % infill on PETG. I had low filament level so I printed the first few layers with PLA different color as seen. I recommend using one filament for best adhesion. For the Gcode version I added tree support with minimal…
Printed the Reaper with Glow-In-The-Dark PLA, The Candle Holders are printed with PETG. Candles were Home-made scented candles. Size of Polycarbonate Containers : 38 mm x 12 mm
Careful taking off support near the fingers, Rest of the printing setup should be fairly straight-forward; please let me know if you would like to see an articulated version or jointed version :] Depending on the model downloads, I might…
Model Name : Undead Pirate Category : Halloween Print Tips for this Model: Printing Layout : Printing it with a slight slant as in the images will give the model super strength, I would not recommend printing upright since the layer would…
Prints well both with PLA and PETG, GCode made for optimal PLA sturdiness. Please let me know if I should also make it for PETG :)
Print without supports :] Initially I wanted to make the model much wider and diverse but I realized it could be a long print and I minimized the print space and use for supports. Also included an optional removable box to store mini…
Print with brims and slightly reduce speed for the first few layers.
If you wanna get a bit fancy carrying your cigarettes on a more permanent holder, use this to hold it for you. You can simply press it inside and when you need it, give it a slight nudge and see it come out effortlessly. Recommend to…
Printed with eSun HyperPLA - I would recommend slightly tilting the model if you have more time to print it for strong coat of PLA+. I tried to make it printable without supports but did not want to cause overhangs on a few areas,…
Printed with Tree support [Minimal support as seen in the images]
Printed with PLA Black top portion and PETG Transparent for color variation. Easy to clean, keeps the soap dry and drains excess bubbles and water from below. Printed with auto tree support. Do share with me your results if you happen to…
I created 2 separate versions of the model: One is a fully jointed single object version I decided to take down the 2 parts version since I thought it would be better to print it with pause command for color change.
I created this character to have a 3D mascot for my virtual studio.
Should work fine with most clock components. For this, I used a Quartz clock component. This build is remixable on various sides, and the easy slide-in mechanism makes the design intuitive to remix on. I would recommend using PETG or…
I am creating a casual sci-fi series called Fungirl set in an alternate Earth called Earth 82 in the year 3011. Ava is the protagonist in my series and the first 3D printable character I created. I am setting the price as open as I wish.…
These are all currently available results.
![Shuriken [Collectible/Toy]](https://media.printables.com/media/prints/515958/images/4177926_e0e2b4af-175a-460a-8656-5458c6ffef8f/whatsapp-image-2023-06-29-at-181250.jpeg)
![Rick Sanchez [ Rick & Morty ]](https://media.printables.com/media/prints/1066044/images/8065814_6b52caa0-0d35-4253-b260-d84e8793292c_df4e4b2d-9151-42ce-a83a-8731e9865969/ricktickle-5.jpg)
![Ice Duster [Scraper/Scooper - 2 in 1] with Handle](https://media.printables.com/media/prints/663827/images/5227504_402c0b65-3acd-42fb-a925-267c1cb14a0d_5196c6d8-284c-492c-a858-5e00340668ee/20231129_220203.jpg)
![Replacement Knobs [For Roland Drum pad]](https://media.printables.com/media/prints/1076860/images/8146360_b111a73e-8261-4794-936e-fa45c26112d3_f8804bf5-ee50-42f4-9286-17ba06378f69/hand.jpg)
![Parasyte : The Grey [ Jeon So-nee ]](https://media.printables.com/media/prints/1061022/images/8030876_861c9a36-2518-432a-a2c9-e4b21fbb3cf3_2c61f19a-62c2-4a7c-93cb-b35ed8c7390b/20241102_065952.jpg)
