Counting matching models…
1/2 BSP to M22 thread adapter PLEASE NOTE: use "exclusive" as "slicing tolerance" in Cura The sealing ring needs to be printed in TPU. Additional sealing tape (PTFE) could be needed. Print Settings Printer Brand: ELEGOO Printer: ELEGOO…
Here's a simple phone stand which fits iPhone 11, 12 & 13 with cases. It's easy to print! For anyone who wants to change something, I uploaded the .STEP as well. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts:…
Safety Plug for 12 Gauge Shotguns. It is not exactly at right angles to avoid snagging. Use at your own risk! Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 40 %…
Drip tray for two espresso cups or one big cup - or whatever you need it for. The usable surface ist approx. 114 mm x 102 mm. UPDATE: Now it's possible to print without supports! Print Settings Printer Brand: ELEGOO Printer: ELEGOO…
Besides the fact that we love animals, birds can make a big mess at our places. I had to cover a lot at the entrance of our apartment, to prevent daily cleaning. The prices for bird defense are pretty high. Let's print it! I recommend…
This is a plant holder to grow plant roots. It fits perfect in a IKEA glass. The diameter is 8 cm. Print Settings Rafts: No Supports: No Filament: unknown PETG, ABS Category: Outdoor & Garden
This knob is made for the PL41EM. The inside diameter is 6.1 mm (slicing tolerance: middle). It should also fit the PL41, just check the diameter or spare part information before. The knob itself is bigger than the original to have better…
This bottle holder has an inside diameter of 94,5 mm (3,72 in) at the top. The outside diameter at the bottom part is 81 mm (3,19 in). PETG didn't make it this summer. It deformed a bit because of the sun and the pressure at the lower…
The old holder fell apart. You can see the type which was used before in one of the pictures. For better printability and strength, the opening is smaller. Because of that changes, TPU is needed as material. The wire has a diameter of 4…
Airpump adapter replacement for Bravo 4 Hose inside diameter: 17 mm / ~0.67 inch Attachment outside diameter: 21 mm / ~0.83 inch Try the fit before you glue it into the hose, maybe there's no glue needed. Print it upside down. (cutouts on…
Replacement buckle for the push part of the 'Kapten & Son Helsinki' backpack. It's not perfect, but holding it together so far. If you want to modify it, you can use the .f3d file. UPDATE: I made a stronger version. You can sand it a bit…
Replacement handle for 4.5 mm x 4.5 mm corner valves pin. If it doesn't fit, use "exclusive" as "slicing tolerance" in Cura. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Doesn't Matter Supports: No Infill: 100…
I designed these door hinges for my 3D-printer box. It's for 4mm thick acrylic doors. You dont need anything, beside two metal screws to mount these anywhere. Please look excactly, which door hinge you need, before printing. There are two…
It's a remix of 'zrides' "Tesla Model 3 Center Console Tray -- 2021". I wanted to have TPU inserts to get rid of plastic sounds out of my center console while driving. The height of the inserts is not to the top. That's on purpose to…
Lid for Bosch Mum5 25 cm diameter bowl. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: No Resolution: 0.16 Infill: 100 % Filament: Formfutura Polypropylen (PP) Centaur - Natural Notes: Rafts are…
Extension for the original "Dyson™ Light pipe crevice tool". Fits Dyson Outsize™, V11™, Dyson Cyclone V10™, Dyson V8™ and Dyson V7™ vacuums. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes…
Cap for posts with outside diameter of 32-34 mm. The inside diameter is 34.2 mm. I used TPU. You can see the old cap as reference in the pictures. The wire holder is in my other projects. Print Settings Printer Brand: ELEGOO Printer:…
Mount for 'Teufel' center speaker. Print Settings Printer Brand: ELEGOO Printer: ELEGOO MARS 3 Pro Rafts: No Supports: Yes Resolution: 0.2 mm Infill: 40 % Filament: Jayo PETG grey Category: Hobby
Ejection Tunnel for the "Anfim House Self". It's about 0.5 cm shorter and will reach more into the middle of the portafilter. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes Resolution: 0.15 mm…
To protect the housing of the Heckler & Koch SL8 / G36, I wanted to cover the part next to the ejection chute. I used TPU filament for the print. Thin double-sided tape is recommended. Category: Sport & Outdoors
Rail for 'Park Lite' parking disc. Flip the side as on the picture to keep everything readable. NEW: extended version with more surface to glue it onto the windshield Why would you need the rail? Changing the battery and setting the time…
After more than 20 years, the window shutters center closure broke. The handle fell apart. We had another one which was not completely broken (in the back of the picture). I did some research to verify the brand. It is ‘Maco’ (maco.eu)…
The top part for the Promend SJJ-299 bike phone mount. I made it about 50% wider because the original one snapped at the screw holes. The uploaded version has better stability at the front, which looked a bit thin after printing. Print…
Rubber spare part for Miele Washing machine. The inside diameter of the socket is 35 mm. How to mount: screw the metal stand completely out and remove the old rubber. Apply the new one by using a screwdriver or something else to flip the…
These are all currently available results.
