Counting matching models…
Holder for XY-MOS D4184 Power MOSFET breakout module. Snap-in, no screws are needed to hold the module in place, but holes for small screws are included for extra security. I used 1.8*5.6mm sheet screws. Print Settings Printer Brand:…
I remixed this quick print model ( https://www.thingiverse.com/thing:251085 ) with this with the 38mm thread ( https://www.thingiverse.com/thing:4011226 ) Compatible with European 38mm triple-starts threaded PET bottles, like typical…
Bahtinov mask for the Svbony 60/240mm guide scope. Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights. Print Settings Printer…
With numbers which makes them easier to identify, especially at night. I printed my set from PETG, 4 perimeters, 100% infill. Might need a bit post processing to touch up any PETG stringing and smoothen the numbers.
Standard Vixen-stlye dovetail, with holes for Svbony / Orion Guide Scope rings, and Svbony dovetail clamp. Versions: The 90mm version is the same length as the original finder-dovetail. The 120mm adds a bit extra length for balancing.…
This is an M42 Lens to 1.25" adapter for cameras planetary cameras with 12.5mm back focus, like the ZWO planetary cameras. It has an integrated vixen dovetail and a photo tripod nut. Works with the factory ZWO 1,25"/T2 adaptor with a…
Turn your 6x30 finder scope to a compact guide scope! This adapter allows you to mount a (ZWO) camera with 12.5mm backfocus and a T2 thread to this 30mm finder scope. I tested it with my SkwWatcher 6x30 finder scopes. The scope has a very…
Virgen del Pilar marco para hacer manualidades.
Wall mount holder for the IR remote on the picture. Has 2pcs. 4mm diameter countersink holes for screw mounting on the back. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Filament:…
Remix of Wuggi's excellent EQ5/HEQ5 tripod leg transport clip to print it without supports. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Infill: 10 Filament: C-Tech PETG Notes:…
Bahtinov mask for Skywatcher EvoStar 150mm ED 150/1200 refractor telescope Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights.…
Bahtinov mask for Skywatcher StarTravel 120mm 120/600 refractor telescope Splitable Bahtinov Mask Generator by Ryoko .scad file customzied in SCAD. Wall thickness is 3mm. Not a snug fit to avoid problems with shrinking on cold nights.…
Remixed from: https://www.thingiverse.com/thing:3311627
Lead acid batteries come with a useful protector plastic cover for their terminals. These tiny parts can be lost very easily. I made a replica for them. The slit is 6.5*0.8mm, quite tight fit, won't fall of easily. 3D printers are not too…
Telescope Tripod leg clamp and holder for MELE Quieter MiniPC. Compatible tripod leg diameter: 40mm (Eg. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. + + + Note: I remixed…
90 degrees knee adaptor for pole mounting of a Sencor SWS 12500 or Bresser ClearView 7in1 or similar weather station. Print it with a UV resistant filament, PETG for example. Use at least 4-5 perimeters + high infill, this thing has to be…
Counterweight shaft adaptor for Skywatcher 18mm counterweight bars and Skywatcher counterweights with 20mm bore. Copied from the original part. Compatible mounts: AZ-EQ5, HEQ5, EQ6, EQ6-R, etc. Print Settings Printer Brand: Prusa Printer:…
This is a Bahtinov mask with an integrated lens cap for the Lacerta 72/432 ED refractor. This is the same scope as the William Optics Megrez 72ED, or Levenhuk Ra R72 ED, so it will fit those, I added the clean lens cap without text for…
Remix of agmcmll 's sunshade for direct wall mounting. I integrated the sensor mount, it has one screw hole to accept compact sensors like the SHT30. Print Settings Rafts: No Supports: No Resolution: Variable Infill: 15 Filament: EkoMB…
Vixen-style dovetail mount for non-cooled ZWO ASI cameras. It is remixed from jamesdedij's excellent ZWO filter holder. Printable in two parts, 2pcs. M5*30 screws are needed to join the parts. I also added some epoxy. I decided to split…
This is a compact holder for the standard 6x30 finder if used as a guide scope. I printed it from PETG. I tapped the treads in the plastic, it is screwed together without using nuts. Tighten the bolts in a criss-cross pattern evenly in…
I made a lens cap with an integrated Bahtinov mask for the Pentacon 135/2.8 M42 telephoto lens. The cap fits tighter on the lens than the factory lens cover. The two parts mate with threads. Print Settings Printer Brand: Prusa Printer:…
KCD11 switch holder with holes for connectors and mounting with cable tie. Snap-in, no screws needed. 8mm version : With 8mm holes to fit standard DC5.5*2.x mm female connectors. RCA version : The holes on the model are 9mm and 6,5mm…
This eyepiece tray extender locks onto a 2" slot of the original tray and extends it with 6pcs. 1,25" slots. It locks into the original tray with a threaded nut. The uploaded model doesn't have text and it fits the Prusa Mini. Depending…
This is a desktop stand for the MELE Quieter. I made it for the version 2D, but probably fits the newer ones too as they are the same size. (The v4 was the newest at the time of uploading)
Telescope Tripod leg clamp and holder for Fodenn F30 MiniPC. Compatible tripod leg diameter: 40mm (e.g. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. This MiniPC has a power…
It is difficult to mount a focus motor on Lacerta Crayford focusers, because no free threaded holes available, but I figured out how to do so! This part grabs onto the housing of the focuser shaft, and holds the motor firmly in a very…
Wind-up key for Pepco cat toy mouse which sells only for 1.3 EUR / pc. but without the wind-up key. Might be used for other wind-up toys with a 3.5mm*3.5mm square shaft. No supports needed.
This tool helps you to rotate the camera easily to get North (or S, E, W) up on your images for astrometry. This is a holder for 10*10*29mm bubble levels for ZWO ASI Planetary cameras. Designed with 0,1mm tolerances, which makes the…
Case for SkyWatcher Planetary 2.5mm eyepiece Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: No Resolution: Variable Filament: Azurefilm PLA Category: Gadgets
The Svbony Dovetail Clamp is a top quality accessory for telescopes, but sometimes it is difficult to reliably fasten heavier loads. This thumbscrew handle gives you a better grip. The loose version is easily removable, and the tight…
Battery holder / case for Panasonic Lumix DMW-BCK7E battery. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: Prusament PETG Category: Camera
Adaptor plate for SkyWatcher EvosStar 150ED and Lacerta Octo 2" rack and pinion focuser. Design files in Fusion 360 format and .step are included for remixes. I designed this adaptor to connect my heavy duty Lacerta 2" rack and pinion…
Wall mounting holder for Elpumps DSK-10 flow control switch. Probably good for the AL-KO DSK10 as well. First install the DSK-10 in the holder, then mount the pipes. The top part is secured by a zip-tie. Print Settings Printer Brand:…
These are all currently available results.
