Counting matching models…
purpose this mount offers rugged angular adjustment even on rocking platforms for sensors AJ-SR04M / JSN-SR04T, used in many arduino/raspi-zero etc projects. material if you platform is used in direct sunlight, don't use PLA, as it will…
may be used with rdzsonde, meshtastic and others while hiking, to fix it securely to the vest/belt/backpack.
This is a part that allows you to repositon the display unit of your Sovol SV06 from the original positon on the right side to the front left side of the printer, see pictures. Additional Parts: you will need 2 pcs socket head screw M4x25…
Material: PETg may last longer, but PLA does the trick too. Printing: 100% infill are good, but may cause smeary surfaces on some printers. (see in picture), in this case reduce extrusion. 0.3mm layer height is o.k. too e.g. for “mass…
leaving a sumup model “solo printer” in a semi trustworthy environment. it's not protecting against theft or vandalism, but it keeps it from “moving” to other rooms (and not returning).
printing tipps: Please print in PETG or ABS, since PLA may not be stable enough in higher temperatures which may occur adjacent to other electrical devices. transparent material for the lid (top) will let the LEDs shine through.…
what is this? we had an electrical junction box, closed by a lid 15x15cm, fixed by two 4 mm metric screws. this box had glued wallpaper with some structure and been painted white several times over the decades. the lid broke and the…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
purpose We developed this charging station to offer free phone charing for people on the public square next to our maker space. Two large smart phones can be charged simultaneously laying on the top front. Providing QC3.0 and PD even…
This pinhole camera is designed to be cut by laser cutter from black cardboard. The screen should be cut from tracing paper. The 3D file is supplied for illustrative purposes only (and because printabels forces you to upload a 3D file).…
This housing provides a bit more weatherprotection and ruggedness for the Fanvil intercom i10S/i10SV/i10SD SIP mini intercom. Due to the fact that there are two holes in the front for the camera and the push button it is not entirely…
This box is made to facilitate the mounting of a Lorawan sensor in areas of potential vandalism or natural forces. the slotted mounting holes provide multiple anchor possibilities. Housing does not need to be water tight since sensor is…
the tile is slightly angled, allowing water to drain into the sink. small pins prevent soapy bottle from sliding into the sink. edges to the sides and read prevent water spill in unwanted directions.
These are distance brackets for RF door contacts (round oval transmitter PCB part, aprox 59,8 mm x 23 mm x 12,7 mm) in order to lift them by 12,5 or 26mm to be in better reach of the magnet on the other part of the door/window/lid.…
the OEM part is available to move the display of this central heating furnace (2005 era). the original is not very rugged, not suitable for placing the panel in a room with lots of people moving stuff. We created this replacement.…
To be printed preferably in PETG with >70% infill and 3 walls. has been in prolongued use for over a year without any siginificant signs of wear. use at your own risk
this cap to replace broken/lot caps of an ironing board. cross section/dimension of metal frame is 20x30 (more exact 19,5x29,5mm²) i suggest any type of contact glue if it's not a snug fit.
after the 3rd of the footcaps of this Wilkhahn Flipchart Model 442/1 fell out we decided against glueing it back but make a set of new ones, with strong fit. Works in PLA. Recommended to print “sole up” and activated ironing for a smooth…
as the previous housing was just IP44 (light rain) protected (see https://www.printables.com/model/514839) this is roof housing is to cover from direct rain, spray and wet hands (IP54) additional materials needed: switch electronics from…
this cap is for installations where it's not possible/allowed to keep a permanent connection between fresh water system and a central heating without a (dedicated) system separation device. In other words: you have to cut the connection…
in a room where courses and conventionals are held, several remote operated Pan/Tilt/Zoom cameras are mounted permanently. In order to show their status as “really turned off/inoperative” (when no recording is wanted), these blinds…
These are all currently available results.
