Counting matching models…
This bracket was designed to support the horizontal divider between the drawers if they become damaged. Often the dividers are damaged where they are secured to the sides and the supplied fixings can not secure them. The bracket is…
This is my colour-changing bed lamp. It is powered from USB and can cycle through a selection of pleasing colours with the press of a button. There are also some different soothing animations. The model is designed to slip onto my…
3D Printed minimalist bedside lamp with Ikea with smart bulb
Reaching the phone on the night stand was painful because mine are too low, so I needed a different place to keep it, light on my bed headboard. Adjustments Since every phone is different, I'm sharing the Fusion360 project file so you…
its a Desk Organizers hexagon its 18cm wide and 15 cm tall, i dont know what to say more i just needed it so here is the model for other people
Shelf which perfectly fits on the side of an IKEA SMÅSTAD loft bed. Has the following features: Mounts to the side of the bed. If you want to have it fit to a corner please check out the original model Shelf dimensions: 228x190mm Clamp…
Traga di Minnie da appende alla porta della cameretta dei bambini inserendo il proprio nome. Ho inserito anche il file stl modificabile per inserire il nome.
The Dyson Brush Case is a convenient way to store your Dyson brush. The case allows you to lock the brush in place, keeping it secure and preventing it from moving around. It also protects against deformation, so your brush maintains its…
A simple holder for the camera unit of the "Momcozy Baby Video Monitor BM01". Depending on where the bed is, you don't always have a surface nearby to put the camera on. So I designed this holder to be hung on the side of the baby's bed.…
For the lady that likes a lil extra..approx 250mm long,69.5mm at its thickest.Please feel free to rate and review.
Every time I get in and out of bed, this thin ladder makes my feet very uncomfortable. I made this mat, which makes my feet very comfortable. I hope my work can help you solve your problem if you have the same pain point. I hope our…
Legs for the IKEA dresser of the KULLEN model, consists of a set of 6 legs, Ø5 wood screw is needed. (Patas para la cómoda de IKEA del modelo KULLEN, consta de un juego de 6 patas , se necesita tornillo madera Ø5.)
The clutch was a bit redesigned (less sharp edges) and print settings was optimized in order to reduce efforts to insert blinds beads. Print parameters: 0.16mm layer height, 2 wall, 15% rectilinear infill It was printed in PETG (to…
After some experiences with baby always disassembling camera from bracket I decided to redesign mounting method to this version. Now it is still print in place with one piece and the camera is just clicked inside. Holder for TrueLife…
This is a computationally optimized shelf bracket, designed around ~100lb (~440N) loads, although I'm fairly optimistic it can hold more than this. When printed vertically, it uses no support material. It is incredibly strong for its…
This is a simple container for holding Camp Elim round patches , that have a diameter of 78mm. It should also work with other patches with the same diameter. Prints with zero supports. Print with PLA and 0.2 layer height.
An upgrade on the DoorStop by @Syd_334291. Optimised for larger gaps and thicker carpets
Tired of losing your special someone or maybe just your special something ? This Valentine's Day, keep love (or lust) right where it belongs with this AirTag-friendly butt plug. 💖 Never lose your lover (or your dignity... maybe) 💖 Works…
One of the guys in my house is a big Broncos fan, so I made this for his closet doors.
this is a grommet/ cover i made for the hole in my wall that my ethernet cable comes out of, it makes it look neat.
I had some bi-fold closet doors break on me one night and it was too late to go to the hardware store. I designed this, printed in PLA, and installed it and it held up for about 2 years until I overextended the folding doors and it…
MALM bed holder for beds not pushed up against the wall. This model is for the 4 cm between backside of the bed and the wall. Holder inner area is 186 x 106 mm. Enough for big 6"9 phones remotes or whatever. Print settings I used: PLA and…
Hello there, I made this handle for my daughter since the original IKEA handle broke. She painted hers with melted cryons but whatever method is fine. Its easy to print and it works fine so far. The hole distance is 128mm.
This is an M28X2 nut for a Relaxdays bedside lamp.
The Ikea Komplement divider for the 40 cm depth Pax (804.675.65) have a tendency to look disorderly. This brace fixes that.
Wasn't too fond of anything of the sorts that was available to print, so I decided to take my own spin on it. Prints easy on its side with a support for the middle section. I used the tried and true 0.6mm nozzle which gave me two walls.…
I modified the original bracket by increasing the back section as I need more fill for my closet rod to get into both sides of my closet.
It's 90mm high. You can easily scale up along vertical axis if it's too high/low. If unstable, scale along the horizontal plane.
Ikea Besta Clothes rail, works with original IKEA screws Suitable for 20mm rods
Since I have a sloped ceiling, the IKEA Turbo clothing rack is not very space-efficient. To position the rack further to the side, this adapter is designed to shorten it to the desired height. The part shown in the picture is made from…
Replacing part for blinds. The original one was weak and snapped. Adjust width accordingly to your window size.
That bright LED on my Honeywell HEV615WC humidifier was driving me crazy at night. So, I designed this simple light-blocker. Works like a charm! Dark-colored filament is your friend for this project.
Childproof connector lock. It cannot be removed by a child with bare hands. They are designed as full-size plugs, so that all electrical connections are inaccessible. This eliminates the risk of accidental electric shock due to stray…
The nut can be used with a 16mm wrench and is more discreet. The knob can be screwed in by hand
Higher legs to IKEA SONGESAND bed. Thanks to the higher legs, Castorama boxes fit perfectly under the bed.
Lámpara Digimon 3D - Digital Monsters Logo Lightbox
same as the original, just added a hole in the back for a nail to slide into. also threw a piece of double sided tape under the whale to keep it level.
There are people in this world that still read books. There are also people in this world who sleep. For the small fraction of people that do both, I have an amazing solution for you. The bedside caddy. It is mounted between the bed frame…
Screw-on model (black) Dimensions: 12mm diameter, 7mm height It's designed for 4x20mm screws. I suggest printing it in TPU (with 100% infill or max walls) – this way you can tighten the screw a bit more, which will squish the printed part…
Use double-sided tape or glue to fasten it down. It presses against the ball so the tape/glue is just needed to prevent it from falling off sideways and doesn't need to be very strong. I printed it without supports and had no issues. PLA…
A holder for a hairdryer which can be mounted to a piece of furniture via press-fit. Especially designed for: - Philips EssentialCare BHC010 - IKEA SUNDVIK It should work with most hairdryers and all furniture with an 18mm wide board to…
Remix of the part made by Smolzilla Makes to have 2 nozzles. I attached 3 files: 1 with the complete part. And part A&B that are pre-cut if you aren't able to fit the print on one build plate.
A cover for the IKEA 150° hinge to protect your clothing from the moving parts of the hinge. Print orientation: default from stl (same as in photo) Supports: yes (organic, needed only on the flat parts) Material: PLA
Would you like to support my work? :) Check out my full catalog with exclusives, early access and commercial licences. — A print-in-place foldable clothes hanger. It can be printed on a standard-sized fdm printer (220 x 200 mm). It folds…
A simple and aesthetic backpack hanger/organizer. Designed for backpack storage but with gyroid infill at 60% and 3 wall loops held up to 9 kg (19.8 lbs). Designed mainly for a 25 mm rod, comfortably fits up to 27 mm, needs to be scaled…
a small thing that holds your bracelets and builds pressure in about 2 hours.
bungee buckle you insert it at any angle making it so much simpler to buckle 2 different design styles no supports
Print in PLA. Use IKEA screws to mount. 256x256 bed needed to print this bigger version (angled 45 degrees)
This is a small hanger for backpacks or other bags. The rod in my closet is the thin 8mm type so I didn't want a large hanger designed for 30/35mm rods, which seems to be the majority of models. This hanger is designed with a 21mm inner…
Dorm Room Bedpost Shelf This dorm room bed post shelf is designed to fit 2 ¼" or 58mm Square bead post. should be able to be scaled to fit other sizes. It is 210 MM Square surface can hole a fair amount of weight. Ideal for their phone or…
Printed on Ender 2 pro. No support, no brim. Swith filament to gain multi colour highlighting the icon. One is left blank to be modified at will.
IKEA UTAKA Bed Frame Adapter (for Thicker Mattresses) Please Post Makes The IKEA UTAKA stacking bed is originally designed for very thin mattresses. If you use thicker mattresses, the two bed frames will no longer fit together properly.…
I needed something to hang my headbands, as they were cluttering up my desk space. I printed the headband hanger using yellow PLA+ at 0.3mm layers. I used 8-32 screws with accompanied nuts to secure components together. I used organic…
Designed for stick with 1.5 and 2 mm diameter. Materials used: Black PLA with Woodfill PLA Any sand filling will do.
This is a very specific fix for a very specific problem that you don't likely have.
although their are many suports, they are easy to take off.Great for the many benchy lovers in the world.
Replacement Horseshoe Clip for Clothes Hangers A simple replacement clip for standard plastic clothes hangers. This horseshoe-style clip slides onto the hanger's bottom bar and securely holds straps, skirts, or pants. Features: Tapered…
Digital Prototype: Modular Bed Frame from 4040 Aluminum Extrusions Important Notice: This project is a purely digital prototype designed in CAD software. The design has not been physically built or tested for its structural integrity and…
I printed with one edge on the plate and a brim around it. layers parallel to that edge and not straight down the shoehorn. I thought it might be a problem and was considering printing on a raft, but I no longer think that is necessary.
About the model: Cheaply hang a sturdy wardrobe rail! Just print two of these brackets and use the handy center hole to position them in the desired spot, add some screws and a broom handle (Suits 25 mm / ~1 Inch diameter) cut to the…
An OpenSCAD script to create a parametric stand structure for mounting a fan. The design features a half oval (half ellipse) shape that provides stable structural support. You can change all the fan and base specific values to ensures a…
Good girl~ THE SAME DISCLAIMER FROM THE ORIGINAL DESIGN APPLIES TO THIS ONE This is a remix of a friend's hardware free BDSM paddle. I've added some corners at the base of the paddle to prevent it from rotating, and slightly widened the…
A moon with a smiling face. Attach it to a wall or the ceiling in a children's room as decoration (for example together with some stars), or use it as a gift. I printed it with “glow-in-the-dark” PLA filament. The size in the picture has…
Not too small but not too big. Does not bend book. Works great and is a quick print. Comment for recommendations.
I made a remix of the post: https://www.printables.com/model/725026-malm-bedside-table-old-dimensions I had to adjust to the new dimensions and added a removable bin.
Printed with a 0.8 mm nozzle, primarily due to the amount of material needed. Model can be scaled to accommodate other sizes. No support needed.
Vaculock f3d and step file for easy editing or adding it to existing projects. For printing standalone I'd advice flattening the top a bit and printing it upside down.
HY300 projector remote control holder, fits 18mm furniture board. In my case, I also used adhesive tape for mounting.
Simple hook designed to be adhered to surfaces with double sided tape with 3 hooks,
I made this to fit an Ikea headboard for a mini projector.
The hinge on my Ikea Kleppstad cupboard tore out of the wood. I could not find a repair plate for this specific hinge. The hinge is also used on Billy cupboards in some regions. The hinge part number at Ikea is 109338 and the mounting…
Print on left or right side without supports. Connects multiple IKEA Spruttig hangers. Better use of your space. I saw this model , which is nice and uses less filament and print time. I decided to do my own design, as I wanted a bit more…
Made from PLA, printed with 2 walls and 0% infill.
A light panel i made to hold other things on top i like to use it to hold a remote for leds
Simple foot extender for swiss sense beds, I created it for an extra 40mm under the bed for a roomba to fit under. Feel free to remix this with different sizes for your needs. Dimensions: 71mm inner diameter for the slide in fit of the…
If necessary, scale the model. PLA Print time ~2h45m ~210 g Nozzle: 0.6 mm Layer Height: 0.3 mm Fill Line Width: 0.62 mm Perimeter Generator: Arachne Perimeters: 4 Solid Layers Above: 5 Solid Layers Below: 5 Infill Density: 20% Infill…
Made a remote holder for the Bwarm heated mattress pad found at the link. I am using a 3m strip or two to adhere to the wall. https://a.co/d/cbkiuXv
