Search results: 006

Sort order

555 models

P
PrintablesL0ran

Bosch Mum5 rotator - Bosch pt. nr. 00630760

I printed it with 50% infill, brim and supports addded to: The bottom face of the wings (not the inclined ones) The base circle The center square which is a bit above the ground the small gaps on the driver pins sticking out downside The…

Downloads
495
Likes
44
Rating
3
P
PrintablesAlgernon

Airbrush stencil ST-TX006-wood-texture-num1-paint-hobby-stencil

Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.

Downloads
331
Likes
96
Rating
0
P
PrintablesKarpo

9MM Ammo Hollow Point Dummy #0006

9MM Hollow Point Dummy NO AMS or MMU Needed Just swap a fillament when you start to print the bullet

Downloads
114
Likes
14
Rating
0
P
PrintablesRon Harding

AMPS pattern cell-phone mount for 2006 Infiniti G35

This is the base for a cell mount for a 2006 Infiniti G35. It installs without permanent modification in the ashtray. It's very close to a 12V socket in the console, to connect a charger. This is just a generic base, designed to accept a…

Downloads
39
Likes
1
Rating
0
P
PrintablesNordic

Playmobil Cannon Axis Wheel 41x14 Replacement - 30030600 30063460

Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…

Downloads
28
Likes
16
Rating
0
P
PrintablesJosh prints

Mini Cooper/First/One R56 2006-2013 (1:43 scale))

Print with supports for underside and mirrors. Infill can be quite low (5-10%) Doesn't need to be strong. Sliced files are added for an ender 3. The two sides will glue together or can be printed as 1 whole part.

Downloads
25
Likes
3
Rating
0
P
PrintablesTomino

Grain Mill Coupler Bosch 00628702

An example 3D printing can be useful also for mechanical parts manufacturing. Maybe someone find this model useful. My original coupler of Grain mill Bosch MUZ5GM1 has broken. It is made of some plastic material. So I decided to design a…

Downloads
16
Likes
0
Rating
0
P
PrintablesStenly_G

Bearing Set - 608 - 6006

This bearing kit contains detailed 3D printable bearing models for functional or visual use. Ideal for demonstrations, mechanical concepts and modeling. All bearings can be printed in one piece or as separate parts for smooth movement and…

Downloads
3,346
Likes
901
Rating
4.48
P

TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P 10-inch Rack Mount

A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…

Downloads
1,447
Likes
108
Rating
5
P
PrintablesCreative Dicks

CHARIZARD DE KEYCAP Nº0006

Keycap de charizard para imprimir

Downloads
1,440
Likes
287
Rating
4.5
P
PrintablesBuildX

#0067 Collapsible Compact Cup Caddy [Holds 2, 3, or 4 cups]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** When you need to make a boba, coffee, or beer run for you and your group while…

Downloads
974
Likes
462
Rating
5
P
Printablesmfraz74

Peugeot Boxer, Fiat Ducato, Citroen Relay (2006-2023) Drink Cup Holder

Printed in black PETG with 0.2mm layer height, 4 walls and 30% infill. I would recommend using PETG as a minimum, for layer height you could go to 0.24. 4 self tapping screws are required per side. Update 10/11/24: Added modified cup…

Downloads
906
Likes
100
Rating
5
P
PrintablesBuildX

#0062 Toroidal "Ninja Star" Rotor/Propeller

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…

Downloads
848
Likes
127
Rating
4.8
P
PrintablesProjectPokemon

#006 Charizard – Low Poly Pokémon

Low poly Charizard, the iconic Fire/Flying Pokémon. A fierce addition to any 3D-printed Pokémon collection.

Downloads
751
Likes
63
Rating
2.5
P
PrintablesBuildX

#0060 Toroidal Rotor/Propeller - 3 loop + 3 blade

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to add 3 blades to a…

Downloads
617
Likes
78
Rating
4.8
P
PrintablesB o |3 |3 0

Opel Astra H 2006 Window lifter button

Window lifter button for Opel Astra H 2000-2006 Printed in pla it didn't last long, I had it printed in resin from a friend and it has been working for 2 years

Downloads
535
Likes
32
Rating
0
P
PrintablesBuildX

#0068 [Remix] Flower Pot Watering Can

I liked the design by @Cisco and decided to make an improvement to seal against the bottle to prevent leaks. Screw the bottle on firmly to get a good seal. If you add this to your collection and/or download the model, please click the…

Downloads
509
Likes
149
Rating
5
P
PrintablesINBUS®

Wall Mount for T Series I IN006

3D model of tool Stand for INBUS® 70129 T-Handle Hex Key Set 8pcs Dimensions: L- 201,99mm, W - 82mm, H - 43,66mm Support: Not required Download: includes STL files for 3D printing and instructions PDF Additive manufacturing accessory…

Downloads
503
Likes
60
Rating
5
P
PrintablesAlberto Nidasio

RD6006 case

This is a case for the RD6006 variable voltage regulator. The design accounts for some ventilation holes and 4 points with which you can remove the RD6006 from the case. Unfortunately in my print the top part broke off. I printed only…

Downloads
490
Likes
29
Rating
4.75
P
PrintablesFonz

RD6006 DC Power Supply Desk Case

Desk housing for the Riden RD6006 Power Supply Controller, for use with an external DC power supply. In use with a 19V, 5.5A external DC power supply. Hole the on back panel is 7mm to fit a panel mount DC connector. Handles are an…

Downloads
472
Likes
40
Rating
5
P
PrintablesBuildX

#0064 Strong and Compact Carabiner + Cord Tensioner [Cam Action, 4mm paracord]

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I've paired a cam action cord tensioner (4mm paracord) with my Action Carabiner.…

Downloads
415
Likes
120
Rating
5
P
Printablespropmatic3d

Anycubic Vyper X-Carriage v006 3d Model

Can be used for any kind of projects requiring accurate measurements of the printhead v006 from anycubic vyper.

Downloads
414
Likes
37
Rating
5
P

TP-Link TL-SG108(PE) | SF1006P 19-inch Rack Mount

A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…

Downloads
413
Likes
42
Rating
5
P
PrintablesBuildX

#0061 Toroidal Tri-Lobe Rotor/Propeller

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and designed a 3 loop + 3 blade…

Downloads
410
Likes
74
Rating
4.89
P
PrintablesLuke96

Fiat Ducato 244 2002-2006 7 inch Chinese radio bracket

Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)

Downloads
395
Likes
33
Rating
5
P
Printablesthall72

Lego Compatible (4006.dat) Minifig Tool Spanner/Screwdriver

This model is compatible with the lego system.

Downloads
368
Likes
40
Rating
0
P
PrintablesErl

Bosch Dishwasher 00611472 Tine Row Clip replacement

My used dishwasher was missing these. STEP included.

Downloads
362
Likes
27
Rating
5
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
354
Likes
70
Rating
5
P
PrintablesAlex White

HKSB110 Car Speaker Adapter (Select 2006-2021 Hyundai and KIA)

I modeled this with dimensions taken from the official part. I have not used it for my install as I also modeled a custom version to exact fit my Kia Niro / JBL speakers. Update 3/14/23: I printed a piece to compare and my measurements…

Downloads
354
Likes
25
Rating
0
P
PrintablesWildRoseBuilds

2006 Mac Pro case mod

Everything you need to fit modern hardware into a mac pro 2006 case. Print in a suitable material with a glass transition temp of 80C+ (i used abs and asa) Refer to this video for details - TBA

Downloads
353
Likes
26
Rating
0
P
Printablescuorekid

Tweeter Pod for Scanspeak D3004/602006

Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4.

Downloads
345
Likes
35
Rating
0
P
Printableskaje

Laser Printer Paper Delivery Output Tray Assembly for HP P1006 (and others)

This is the upper tray for a small laser printer (see photos). This tray will probably work with the following laser printers : HP P1102 P1102w P1102s M1536 P1005 P1006 P1007 P1008 P1106 P1108 P1107 This is not an exact copy, of course,…

Downloads
334
Likes
30
Rating
5

o prototipo 1006

um esperimento que pega partes de brinquedos mortos

Downloads
323
Likes
6
Rating
0
P
PrintablesOiokohoi 3D

Toyota Yaris 2006 key button replacement

central locking buttons, both lock and unlock button. Inserting buttons require disassembly and insertion inside the battery case. On top of the board

Downloads
319
Likes
37
Rating
5
P
PrintablesBuildX

#0006 [Remix] MK3S+ RHD Nozzle Fan Shroud

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a remix of https://www.thingiverse.com/thing:4124587 . Thanks for the…

Downloads
314
Likes
53
Rating
5
P
PrintablesSic Nanchez

2000-2006 Toyota Tundra AC Knob

EDIT: Slightly improved model, made handle smoother. Do not use PLA, it will melt in the heat! Best to print out of PETG for heat resistance and layer adhesion. It can be printed in any orientation, but not without support. Would…

Downloads
312
Likes
15
Rating
0
P
PrintablesModel Magic

Silent Hill - Nurse - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
304
Likes
43
Rating
0
P
PrintablesH3phaestus42

Vauxhall / Opel Corsa C Parcel Shelf Brackets (2000 - 2006)

Includes STLs for both left and right. They screw into the parcel shelf and mine have worked as intended since 2022. Print in PETG preferably to put up with the car getting hot.

Downloads
300
Likes
9
Rating
5
P
PrintablesOss

GMC Sierra (Silverado) 1999-2006 wideband mount (Under vent pocket)

This model I created to mount the wideband in my GMC Sierra 2006.

Downloads
299
Likes
37
Rating
0
P
PrintablesMR White
Downloads
296
Likes
22
Rating
0
P
Printablesjamesbond2285

2002-2006 Toyota Camry Cupholder Separator

I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…

Downloads
286
Likes
27
Rating
5
P
Printables<Charlie_root>
Downloads
281
Likes
19
Rating
5
P
Printablesaelkaim

Bosch / Siemens Freezer Glass Shelf Support Piece - 00639092

I broke two Glass Shelf Support Piece on my Bosch gin81aef0 freezer, replacements are way too expensive for crappy plastic parts (part number 00639092), so I modeled replacement ones and they fit perfwectly.

Downloads
280
Likes
17
Rating
5
P
PrintablesJwidess

GX470 Backup Camera Mount - Lexus 2006

Lexus GX470 Backup Camera Mount This model is a simple 3D printable mount for attaching an aftermarket backup camera to the OEM mounting location on a 2006 GX 470 SUV. The mount was designed for use with this " NATIKA Backup Camera IP69K…

Downloads
279
Likes
24
Rating
5
P
PrintablesModel Magic

Silent Hill - Pyramid Head - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
267
Likes
36
Rating
0
P
PrintablesJoshyu

Oil Funnel Toyota Prius 2006

This funnel allows for easier refilling of the engine oil of a 2006 Toyota Prius. It fits into the opening in the engine block snugly and wedges in between other parts of the engine to make sure it does not move around when you pour in…

Downloads
246
Likes
40
Rating
5
P
PrintablesWhity

Riden Dual RD6006/RD6012/RD6018 PSU Case

Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…

Downloads
246
Likes
32
Rating
0
P
Printablesmacnavi

Sitting woman with basket and apples (F006-Amanda)

Model designed for 1:76 scale, but can be re-scaled to any scale. Comes with supports for resin printers. More models at https://tramfabriek.co.uk/figurines.html

Downloads
246
Likes
20
Rating
5
P
PrintablesModel Magic

REVISED: Charmed - Phoebe, Piper, Page & Prue - 1998-2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
243
Likes
29
Rating
0
P
PrintablesModel Magic

300 - King Leonidas - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
242
Likes
54
Rating
5
P
Printablesmk3

BOSCH Tumble dryer LOCKING CAP - P.N 00629040

Print in flexible material or make negative for mold and cast from silicone. This part is quite easy to loose as it sits on top of condenser water container if connected to outside drain, but needs to be placed back into place for…

Downloads
234
Likes
14
Rating
5
P
PrintablesFelix

WP Fork Protection Ring 62,1mm for KTM / Husqvarna 48600698

A redesign of the OEM Part 48600698 adapted for 3d printing. I split the original design to allow for installation and replacement without uninstalling the forks. A groove was also added to be able to add a piece of wire to increase…

Downloads
229
Likes
21
Rating
5
P
Printablesthall72
Downloads
225
Likes
29
Rating
0
P
PrintablesMeg rallend

Nikon N6006 / F-601 Film Door Latch Replacement (also fits N5005, N4004 / F-401, F-401X)

The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…

Downloads
220
Likes
4
Rating
5
P
Printablesrapolasp

Pottery rib tool #006

I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…

Downloads
204
Likes
34
Rating
0
P
PrintablesGiobby66

2006 Ford Fiesta Keychain

2006 Ford Fiesta Keychain, to be either cut in slicer to print it flat or printed with supports. (I did not make the car model, I just found it and remixed it) Thank you for downloading my design. Remember to like the model if you…

Downloads
203
Likes
30
Rating
5
P
PrintablesMODERN MACHINE

Planter Pot 006 by MODERN MACHINE

COMMERCIAL LICENSE FULL COLLECTION PRINT INSTRUCTIONS • 8-15% infill. • 6 top layers. • 2-3 outer walls. • Scale to desired opening size. • Supports not used. MODERN MACHINE© STL files are strictly for personal use. Unauthorized resale of…

Downloads
199
Likes
69
Rating
0
P
PrintablesModel Magic

Silent Hill - Pyramid Head - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
193
Likes
34
Rating
0
P
Printablescrankshaft

Mercruiser Transom Template 90-79135-006

Cutout and Drilling Template for Mecruiser Alpha and Beta Transoms. Includes removable 6mm Pilot Drill inserts for 14mm Mounting holes and alignment with Crankshaft Centre Line. I had to remove 10mm from the outside profile so that it…

Downloads
187
Likes
5
Rating
0
P

Riden RK6006 case

Compact case for Riden RK6006 power source V0.2B - one piece cover V0.3 - separate body and back cover (easier assembly) V0.3A - cover with banana holes distance 17,4 mm V0.3B - cover with variable banana holes distance (socket) 18,0 -…

Downloads
186
Likes
14
Rating
0
P
PrintablesModel Magic

Silent Hill - Dark Nurses - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
178
Likes
31
Rating
0
P
PrintablesModel Magic

Clerks II - Jay and Silent Bob - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
174
Likes
35
Rating
0
P
PrintablesNovator

RD RK6006 / DPS5020 and compatible DC-DC laboratory power supply case

Power module https://www.aliexpress.com/item/1005005429587089.html Print without supports as showed in screenshot attached. Insert 3mm nuts into the holes in the case and fix cover with 3mm screw.

Downloads
173
Likes
21
Rating
5
P
PrintablesModel Magic

Underworld Evolution - Lycan Rage - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
169
Likes
36
Rating
0
P
PrintablesAce O

Scraper Bar Replacement For Greenworks 22" Snow Blower (R0200650-00)

Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…

Downloads
168
Likes
6
Rating
0
P
Printablesthall72

Lego Compatible (10066.dat) Minifig Hair Orc with Ears

This model is compatible with the lego system.

Downloads
165
Likes
33
Rating
0
P
PrintablesSettlingAbyss

Creality LD006 Air Filter Upgrade

The stock air filtration system doesn't do much actual filtering and instead just moves all the fumes from inside the print chamber to outside of it. This should help significantly cut down on the fumes and smells while resin printing,…

Downloads
165
Likes
13
Rating
5
P
PrintablesNikodrys

Bosch Dishwasher Leg - Revised Design - 00631221

Summary This is the leg compatible with the Bosch Dishwasher. Model reuploaded from thingiverse. Have a nice maker days. Print Settings Printer brand: Creality Printer: Ender-3 v2 Rafts: No Supports: No Resolution: 0,20 mm Infill: %30…

Downloads
165
Likes
13
Rating
0
P
PrintablesModel Magic

300 - King Leonidas Standing with Sword - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
162
Likes
27
Rating
5
P
Printablesbatteria_

RK6006 Case - Variable bench PSU

This model is a remix from Thingverse of “CoolDPS DPS5005 Power Supply” by jopereira , Original design . Model is designed for the rk6006 PSU module, I expanded the design to accommodate an internal power supply. Warning 230 Vac mains are…

Downloads
161
Likes
19
Rating
0
P
PrintablesBuildX

#0063 Action Carabiner - LET'S DO THIS!

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** This is a 6th iteration of my carabiners - this one with an action oriented…

Downloads
160
Likes
28
Rating
5
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
152
Likes
30
Rating
0
P
Printablesbatteria_

Lab bench power supply - Riden RK6006 PSU case

Compact case for Riden RK6006 and DPS5005 module, perfect to reuse an ac adapter from an old laptop or other types of PSU. Required Material for the variable PSU: 8 self-tapping screws: 4/5 mm head and 3/2.5 mm thread with at least 1cm…

Downloads
151
Likes
13
Rating
0
P

Playmobil Axle Clip 30280230 (e.g. 70067 Porsche Carrera) Spare Part Repair

Print horizontally, or it will break along the layers (see screenshot). I printed it in PETG with 100% infill, swapped out both sides so the car sits flat.

Downloads
150
Likes
9
Rating
0
P
PrintablesSimon

Sterndichtung bestway flowclear 2006l/h

Als Ersatz für eine kaputte Sterndichtung bei einer Bestway Flowclear 2006l/h. Eventuell auch bei anderen passend. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 90 Filament: any TPU…

Downloads
149
Likes
21
Rating
5
P
Printablesmmacin

Ducato Boxer Jumper 2006-now pocket cover

Cover for Pressure steering for Air Suspension Fiat Ducato 250

Downloads
148
Likes
27
Rating
0
P
Printablescuorekid

Tweeter Pod for Scanspeak D3004/602006 v2.0

Tweeter Pod for Scanspeak D3004/602006 & other scanspeak Automotive tweeter (D3004 series eg. D3004/602006) this pod angle 25 degree. Need brass screw insert : M3 x 4 x 4 for tweeter mount and M3 x 3x 4.2 for pod to mount bottom base Need…

Downloads
147
Likes
16
Rating
0
P
PrintablesModel Magic

Pan's Labyrinth - The Pale Man - 2006

⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…

Downloads
146
Likes
27
Rating
5
P
PrintablesJoseph Meador

2006 Scion XB Hood Prop Holder&Bushing

2006 Scion XB Hood Prop Holder&Bushing The things that the hood prop need. Print in PETG recommended use auto generated supports

Downloads
145
Likes
12
Rating
0
P
PrintablesFLEX

Battery Charger Wall Holder I FX006

3D Model of Battery Charger Wall Holder Dimensions: L-241,5mm, W -95,02mm, H -159,99mm Support: Required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the…

Downloads
142
Likes
21
Rating
0
P
PrintablesBCDesign3D

Honda Civic 2006 Gen8 (UFO) keychain, keyholder

Just another Honda Civic (2006) Gen8 keyholder... Three models inside: Basic Basic with hole Special wheels and hole You need to enable thin walls parameter to printing the stuffs inside the wheel :) Pick your favourite… :) Happy printing!

Downloads
141
Likes
15
Rating
5
P
PrintablesFletcher

4U Server Case GPU PCIe Riser Mount Conversion V006 to V009S

Overview This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this setup as a neural network trainer, render farm,…

Downloads
138
Likes
28
Rating
0
P
PrintablesModel Magic

300 - King Leonidas - 2006

300 - King Leonidas - 2006 3D printable model.

Downloads
136
Likes
19
Rating
5
P
PrintablesModel Magic

Vintage Video Games - Yakuza - Kiryu Kazuma - 2006

Vintage Video Games - Yakuza - Kiryu Kazuma - 2006 3D printable model.

Downloads
135
Likes
16
Rating
0
P
PrintablesWatskeBart

X-Shot Chaos Meteor RXB-0060 Speedloader

I noticed a unused sliding lock at the base of the magazine. Maybe it was intended for a speedloader, but Zuru but never released to the market. So I made my own speedloader. I printed this on my modified Ender 3 v2 with the following…

Downloads
135
Likes
22
Rating
0
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
133
Likes
20
Rating
0
P
PrintablesModel Magic

300 - Queen Gorgo - 2006

300 - Queen Gorgo - 2006 3D printable model.

Downloads
132
Likes
16
Rating
0
P
Printableswolffm

Cosiflor Plissee 2001-2006 Spannschuh

This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices) so I decided to model this "Spannschuh" myself. I used Autodesk Fusion 360 for this purpose and tried to replicate the…

Downloads
127
Likes
3
Rating
0
P
PrintablesMariano
18+

The source marked this model as adult content.

Downloads
125
Likes
25
Rating
5
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
124
Likes
28
Rating
0
P
PrintablesViet D

9006 LED Bulb in H4 Base

Made this for my taifun headlights to run 9006 LEDs because I didn't want to make a conversion harness. So far the base has been able to withstand the heat from the LEDs. Remove the bases that come with the 9006 LED either by twisting or…

Downloads
124
Likes
14
Rating
0
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
123
Likes
21
Rating
0
P
PrintablesRene

Logitech Y-R0067 keyboard leg

Quick to print replacement keyboard leg for logitech Y-R0067 keyboard. While 3d printing I used supports but it may be possible to print without them.

Downloads
122
Likes
5
Rating
0
P
Printablesthall72

Lego Compatible (3006.dat) Brick 2 x 10

This model is compatible with the lego system.

Downloads
120
Likes
14
Rating
0
P
Printablesdhbiker

2006-2012 Toyota Auris speaker adapters

This was designed quite a while ago for a 1st generation Toyota Auris 3door hatchback. Adapter for the back might also fit the 5door hatchback version... i would assume so. Because this is automotive use i would reccomend atleast PETG…

Downloads
120
Likes
12
Rating
0
P
PrintablesJosé Pedro
18+

The source marked this model as adult content.

Downloads
118
Likes
22
Rating
0
P
PrintablesADIcrafts

ADI Chrono Case for HT-X3006/3005plus Chronograph 24mm

ADI Chrono A custom case for HT-X3006/3005plus chronograph (24mm) ================================================================= FEATURES A case with style 3 parts build, ready for color combinations Tripod mount thread Direction…

Downloads
117
Likes
12
Rating
5
P
PrintablesModel Magic

Space Transport Vehicles - Soviet Soyuz TMA-7 - 2006

Space Transport Vehicles - Soviet Soyuz TMA-7 - 2006 3D printable model.

Downloads
114
Likes
14
Rating
0
P
PrintablesJohnyDoe

BMW R1200GS Headlight Dust Cap 2004 - 2006

This is a bigger headlight dust cap for a BMW R1200GS 2004 model (confirmed but it should fit newer models as well) for LED conversion. Due to a heatsink or a mini-fan usually found on these types of bulbs, the original cap (part number…

Downloads
113
Likes
8
Rating
5