1 / 5
AMPS pattern cell-phone mount for 2006 Infiniti G35 — image 1
1 / 5

AMPS pattern cell-phone mount for 2006 Infiniti G35

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An AMPS-compliant cell-phone mount for a 2006 Infiniti G35.

Rating
0 / 5
Likes
1
Downloads
38
Makes
0
Views
705
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is the base for a cell mount for a 2006 Infiniti G35. It installs without permanent modification in the ashtray. It's very close to a 12V socket in the console, to connect a charger.

This is just a generic base, designed to accept a mounting plate using the industry-standard AMPS 2-hole pattern.  Compatible mounts are made by Quad Lock, RAM Mounts, and probably many others.

Two #10-32 square nuts (3/8" flats) are embedded inside the print.  It will accept #10-32 machine screws up to 1" long.

I built up a nice Quad Lock mount on mine, with a wireless charging head on top. Quad Lock stuff is a bit pricey, but it's top-tier.

Print instructions

Print with the mounting surface down.  No supports are required.

The recesses for the embedded nuts use the Maniacal Labs floating-hole hack, which depends on the specific layer height. The model is currently designed for a 0.2mm layer height.  If you want to use a different layer height, you'll have to modify the Fusion 360 model (change the LayerHeight user parameter.)

Insert a pause at the start of the layer that covers over the embedded nut recesses. That's your chance to insert the square nuts during printing. Use a machine screw as a tool to help press the nuts in straight.

Assembly

Assembly is straightforward.  The flat-head machine screws I used were “in the white” (ie, silver-coloured), which didn't match my mounting hardware.  I used some "cold gun blue” solution to colour the screw heads black.

Tags