AMPS pattern cell-phone mount for 2006 Infiniti G35
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AMPS-compliant cell-phone mount for a 2006 Infiniti G35.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is the base for a cell mount for a 2006 Infiniti G35. It installs without permanent modification in the ashtray. It's very close to a 12V socket in the console, to connect a charger.
This is just a generic base, designed to accept a mounting plate using the industry-standard AMPS 2-hole pattern. Compatible mounts are made by Quad Lock, RAM Mounts, and probably many others.
Two #10-32 square nuts (3/8" flats) are embedded inside the print. It will accept #10-32 machine screws up to 1" long.
I built up a nice Quad Lock mount on mine, with a wireless charging head on top. Quad Lock stuff is a bit pricey, but it's top-tier.
Print instructions
Print with the mounting surface down. No supports are required.
The recesses for the embedded nuts use the Maniacal Labs floating-hole hack, which depends on the specific layer height. The model is currently designed for a 0.2mm layer height. If you want to use a different layer height, you'll have to modify the Fusion 360 model (change the LayerHeight user parameter.)
Insert a pause at the start of the layer that covers over the embedded nut recesses. That's your chance to insert the square nuts during printing. Use a machine screw as a tool to help press the nuts in straight.
Assembly
Assembly is straightforward. The flat-head machine screws I used were “in the white” (ie, silver-coloured), which didn't match my mounting hardware. I used some "cold gun blue” solution to colour the screw heads black.