Search results: 00s

Sort order

Counting matching models…

P
Printables4D

A box for a paper cigarette box - 100s

Design and very well functional box for an 100's cigarette box (58 x 23 x 103 mm). Neodymium magnets 8 x 3 mm are used. The magnets are glued by super glue. The design is made for heavy use and long life. I also made a design for a very…

Downloads
286
Likes
22
Rating
5
P
PrintablesÓscar

Featherboard for Scheppach HS100S table saw

What is a featherboard for a table saw? Essentially, it is a second pair of hands that provides better grip and accurate cuts . Fastened to the tabletop or fence a featherboard ensures that the wood is safely and effectively hold and fed…

Downloads
139
Likes
17
Rating
0
P
Printablesandrewlb

Akai EWI 4000S cable holder replacement

Easy breezy, made for a reddit person who lost their clip. Recommend PETG as the material, since the circular part/omega symbol is meant to flex a bit to accommodate inserting a cable. The top might need a bit of sanding depending on…

Downloads
48
Likes
1
Rating
0
P
Printablesthomergil

Black & Decker WM2000SD Waffle Iron Foot Stand

Prints without supports. Make sure to print it upright on the narrow straight end; print files provided that demonstrate how. Recommend 0.2mm layer.

Downloads
23
Likes
4
Rating
5
P
PrintablesUncluesteve

Replacement Basket rod end for Canon 4000S

The original basket rewind button often gets knocked off the Canon 4000s Plotters, leading to it being lost or broken. A cost-effective replacement has been designed without the rewind feature, but with small tabs that fit into the…

Downloads
21
Likes
2
Rating
0
P
PrintablesMyuto
18+

The source marked this model as adult content.

Downloads
1,026
Likes
304
Rating
0
P
PrintablesSPRKPLG

LigeroLG & GansoLG Camera Body for Lomograflok + Mamiya Press or Polaroid 600SE Lens

Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required may set you back about $105-135+. With material on top of that, consider buying the real thing at: https://sprkplg.com/product-tag/llg/ If you…

Downloads
1,018
Likes
155
Rating
4.57
P
PrintablesHabit

52mm and 60mm Gauge Pod for Nissan S13 / 180SX / 200SX / 240SX

A simple gauge pod for the Nissan S13 that mounts below the dash. It replaces the oem vent assembly. fits 52mm gauges and 60mm gauges My design is a straight replacement of the oem vent assembly. no cutting, no drilling, 100% reversible.…

Downloads
1,012
Likes
61
Rating
0
P
Printableseinichi

Leopard Gecko House (Designed to fit in GEX EXOTERRA 400Slim Cage)

Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…

Downloads
690
Likes
106
Rating
5
P
PrintablesSPRKPLG

Mamiya Press or Polaroid 600SE to Instax Wide 300 Adapter Kit

Update 3/31/23: Added version for Polaroid 600SE lenses. ---------- Update 1/18/2022: Made some improvements to the lens locking method for a much more secure shooting experience. The screw is now no longer a set screw, just a lock screw…

Downloads
621
Likes
39
Rating
5
P
PrintablesVOID

Hifiman HE400SE Grills

Hifiman HE400SE hexagonal grills, heavily inspired by the Custom Cans Super Grills . Modeled from scratch with a less dense hex pattern, purely based on personal preference. I would recommend printing them face down, they should easily…

Downloads
483
Likes
24
Rating
5
P
Printablespserey

Mamiya 645 1000s waist level viewfinder

With the increasing prices of WLVs for cameras such as my Mamiya 645 1000s, I've designed this one for me. Future plans include making it foldable and adding a lens to it!

Downloads
397
Likes
25
Rating
5
P
Printablesjurassic73

Ford Motorcraft FL-500S Oil Filter Socket - two styles

This may strip out the 3/8" socket (it did with mine) due to the torque required in the small hole. The hand-grip style may be more successful. This is an oil filter removal tool for the Motorcraft FL-500S filter which comes in two…

Downloads
383
Likes
39
Rating
4
P
PrintablesHabit

radiator support bracket Nissan S13 / 180SX / 200SX / 240SX

a radiator support bracket, fits Nissan S13 / 180SX / 200SX / 240SX probably also other 90s Nissans

Downloads
374
Likes
40
Rating
0
P
PrintablesHabit

Fuel Line holders for Nissan S13 / 180SX / 200SX / 240SX (different versions)

a full set of fuel line holders to replace the rusty and brittle oem clips on your 180sx/200sx/240sx Nissan S13 4 Versions: oem replacement oem replacement but without the evap / fuel tank venting line Version with additional brake line…

Downloads
309
Likes
41
Rating
0
P
PrintablesAikenlevi

HE400se Hexagonal Grill

Replacement grill for the Hifiman HE400se. Planar magnetic headphones such as this one are extremely sensitive to anything interfering at the backs of the drivers. The stock grill on this headphone is a very obstructing grill with a…

Downloads
293
Likes
12
Rating
5
P
PrintablesTatariushi

Sennheiser HD800S Headphone Stand

I wanted a headphone stand for my Sennheiser HD800S, but I didn't want one that would wear out the padding over time. This stand does not touch the padding at all. This prints without any supports on my Bambu X1C. I'm pretty new to…

Downloads
283
Likes
22
Rating
5
P
PrintablesTnF

Nissan S13 (180SX 200SX 240SX Silvia) Radio console / bezel clips

I had them uploaded on Shapeway's website because it was the only website for sharing 3D prints back then, and had them for FREE download..it seems they removed this option now and because i get a lot of messages through the years i am…

Downloads
269
Likes
20
Rating
0
P
PrintablesHabit

wiper pivot replacement for Nissan S13 / 180SX / 200SX / 240SX

another wiper pivot replacement design. two piece for prints without support.

Downloads
256
Likes
32
Rating
0
P
PrintablesGagi

Nissan 200sx shift boot holder

The lower bracket that holds the control lever. it fits but not properly. it's just a prototype

Downloads
249
Likes
27
Rating
5
P
PrintablesCammy

Triangle Replacement Grille for HIFIMAN HE400se and HE6se

I reccomend that you print this out of PETG and also salvage and stick the original dust protective mesh onto the back of this one to protect your headphones driver.

Downloads
238
Likes
10
Rating
0

Mercedes 300SL year 1954 Designer Ed van der Heijden.

Mercedes 300SL year 1954 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA

Downloads
230
Likes
53
Rating
5
P
PrintablesBazzar701

Tiny Mercedes-Benz 300SL - Mini Cars Series

Mercedes-Benz 300SL, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…

Downloads
213
Likes
52
Rating
0
P
PrintablesHabit

Odyssey PC680 Battery tray / Nissan S13 / 180SX / 200SX / 240SX

Mounting Base Counterplate and Clamp uses M8 allthread with a welded tab added Versions without Nissan and 200SX Features

Downloads
198
Likes
18
Rating
0
P
PrintablesHabit

Coolant reservoir bracket for Nissan S13 / 180SX / 200SX / 240SX

Did you remove your fuse box from the engine bay and are now realizing that the oem coolant reservoir was mounted to that fuse box? Here is your solution!

Downloads
185
Likes
23
Rating
0
P
PrintablesPanda Pandowski

AMD 4700S Desktop Kit Cooler 120mm fan adapter

Since there are no official aftermarket coolers for AMD 4700S Desktop Kit, or any 3d printable parts which could help do it with any other cooler. I decided to try something first myself. I noticed that you can easily swap the 80mm fan…

Downloads
174
Likes
10
Rating
0
P
PrintablesSPRKPLG

Polaroid 600SE Lens to Mamiya Press Mount Adapter

Super experimental adapter that I am releasing as unrestricted and fully open for you to do whatever you want with it. Mass produce it and sell it (out of aluminum please!), and please share with the world (at a reasonable price :P).…

Downloads
169
Likes
14
Rating
0
P
Printablesiggy

Thinkpad X200 X200s X201 X201s Hard Disk Drive (HDD) Cover

A replacement hard disk drive cover for X200-series Thinkpad laptops (X200 X200s X201 X201s). No raft or support needed, the horizontal notch might need a little bit of cleanup after print to properly fit. Category: Parts

Downloads
162
Likes
11
Rating
5
P
PrintablesMossyMav8802

1/3 Scale Federal Sign and Signal 500SHTT (Early Release, Some Updates Coming Soon)

Huge thanks to my friend Demetrius for giving me his ⅓ scale federal gearbox model! All credit goes to him for that. Right now this only has the 10/12 variant, but I will later be adding single tone 12, 8, and dual tone 9/12 variants as…

Downloads
159
Likes
15
Rating
0
P
PrintablesGagi

Nissan 200sx Trunk clip

small clip on the sides of the trunk

Downloads
151
Likes
16
Rating
0
P
PrintablesTeefax

Table insert Scheppach hs100s table saw

A replacement insert for a Schepacht hs100s table saw. I made my final print in ABS and glued the two parts together with a small amount of aceton. You may need to add small supports to the screw insert and the top clip. The dovetail…

Downloads
145
Likes
18
Rating
5
P
PrintablesMark Messmore

Born in the 1900s

I heard this statement and felt it would go perfectly with the Oregon Trail wagon on my desk. I also included a basic stand for the print. PRINT DETAILS Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The…

Downloads
145
Likes
110
Rating
5
P
PrintablesVisthum

Cigarette case with lighter space 100s remix

I only smoke 100s ( king size ) 100mm cigarettes so i decided to make a remix. I added a cylinder shape on the bottom of the lighter compartment to raise it up because otherwise the lighter would be hard to reach. A cricket lighter fits…

Downloads
144
Likes
25
Rating
0
P

200SX S13 wiring grommet

Wiring grommet for right side of the S13 with bigger hole to fit 50mm2 battery wiring, print with some flexible filament like TPU or TPE.

Downloads
143
Likes
25
Rating
0
P
PrintablesBlackOilCoder

Viper S200s Flared Magwell V2

V2. Printed and test fit and working well.

Downloads
142
Likes
12
Rating
0
P
Printablesdr.ocho

Deerma DX700S vacuum - connecting part

For Deerma DX700S Small part that connects vacuum with ‘pipe’. Original part brakes after couple months.. This printed part last from when I printed it 6 months ago.

Downloads
140
Likes
21
Rating
0
P
Printablesyukosteel

49mm filter adapter ring for Fujifilm X100V X100F X100T X100S X100 camera

UPDATE [2024-04-26] : Designed improved adapter angular version II 49mm adapter ring for Fujifilm X100 series cameras. UPDATE 01-02-2024: Added V2 with more smooth walls. Remixed the source adapter by doubling its 49mm thread to other…

Downloads
140
Likes
19
Rating
0
P
PrintablesShinyBlueThing

1900s style wide curved hair comb

My mom has a 100 year old hair comb that she loves, but it's made of celluloid and that means its useful life is limited. This is my attempt to recreate the same shape and style of comb using 3d printing. To get the same shape as the…

Downloads
138
Likes
24
Rating
0
P
PrintablesManifold3D

Mercedes 300sl roadster print in place with moving wheels

I heavily remixed the model to be printed at once, on it's side, and with the wheels built in with an axle. Print it as oriented, no supports, and .2mm layer height worked for me. Scaling it down may cause the windshield to not print…

Downloads
135
Likes
19
Rating
0
P
PrintablesBoorkus

ZWO EAF Bracket to suit Vixen R200SS Focuser

I needed a bracket to mount my ZWO EAF to my Vixen R200SS telescope's focuser. Modelled and printed this in CF-PETG, I'd recommend a CF-fill filament for stiffness reasons as regular PETG was quite bendy. Needs 4x M3 screws and washers to…

Downloads
125
Likes
9
Rating
5
P
PrintablesTait Brown

Fujifilm X100S Lens Cap

After misplacing my own lens cap I designed a snap-fit lens cap. I looked at various sites and there were caps with people's personal brands, caps with no logo, caps with the logo as text. I wanted the actual Fujifilm logo, so here we…

Downloads
123
Likes
7
Rating
5
P
Printables73pctGeek

Transport case for Sauer 200STR 22 cal Bolt

I was handed a metal thingy and told it needed a transport sleeve. I think it's for a bolt action lever? If that's even a thing? I printed it standing and it came out great. Use supports for the overhang.

Downloads
123
Likes
11
Rating
0
P
PrintablesEL BARTO

Lamborghini Countach LP400S

First advice-not props. With them, there is a high possibility of tearing off the spoilers, not to mention the need to clean them after printing. Second advice-only PLA. I printed from PETG (I didn't have a black PLA) and the wheels…

Downloads
109
Likes
6
Rating
5
P
PrintablesDub_Whytie

Bafang 800s Display handlebar mount

I fell off my bike, a Bafang electric bike conversion. i broke the mount for the lcd so decided to make one. this fits my lcd (800s) i do not know if i fits any other model.

Downloads
101
Likes
8
Rating
4
P
PrintablesSergej

Gooloo GT 4000S rugged storage box

Storage/transport box for a Gooloo GT 4000S jump starter. Accessory fits under the Jump starter. Needs 6x M3x30 screws.

Downloads
96
Likes
9
Rating
5
P
PrintablesCrazy

ZWQ S200s Viper Picatinny Adapter

Allows the mounting of picatinny accessories to the top slide of the ZWQ S200s Viper. Uses 4x M3 screws. You probably want some coarse thread countersunk ones for the longevity of the holes in the plastic slide, but I ended up using…

Downloads
95
Likes
11
Rating
0
P
PrintablesAgrloki

Wall Mount Bracket for Deerma DX700S Vacuum Cleaner

Wall Mount Bracket for Deerma DX700S Vacuum Cleaner

Downloads
94
Likes
7
Rating
0
P
PrintablesJarrett Oswald

Deerma DX700S organizar

organizar for Deerma DX700S

Downloads
93
Likes
16
Rating
0
P
PrintablesPapatutuwawa

Hifiman HE400SE Bass Bosst Earpad adapter.

Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…

Downloads
91
Likes
4
Rating
0
P

Washer fluid cap for 200sx S13

If you have S13 and the measured diameter what is shown on the picture is 57-57,4mm, this cap fits for you. I am printed it with ABS and heated the link between the cap and holder ring, to fold it together, but PETG works also I think.…

Downloads
89
Likes
9
Rating
0
P
PrintablesRaphael

Adapter Klimaanlagen Quick Release Schlauchadapter Trotec PAC 3800S

Adapter für größere Schläuche mit 3 Schnapphaken am Anschluss des Schlauches und 142mm Durchmesser. Passend zu meinem Durchführungssystem um die Klimaschläuche möglichst ohne Luftverlust durch eine Platte am Rollladen zu führen.

Downloads
88
Likes
13
Rating
0
P
PrintablesRaphael

Klimaanlagen Quick Release Schlauchadapter Trotec PAC 3800S

Schnellkupplung für den Schlauch eines Klimagerätes (hier Trotec PAC 3800 S Der Schlauch kann in der Rolladenplatte per Bayontettverschluss befestigt werden. DAmit kann zwischen mehreren Räumen schnell gewechselt werden. Ich werde noch…

Downloads
87
Likes
14
Rating
0
P
PrintablesSpin360

Katzenschreck! Anti-Cat Spikes for Phanteks Eclipse P600S

No worries, this thingy won't harm your cat. Make sure you don't print it too spikey. Print twice to replace the top lid from the PC case with those. You could technically put it on top of the lid too, but probably requires some method to…

Downloads
86
Likes
14
Rating
0
P
Printablesclomads

120mm Fan Adapter for Levoit 200s Air Filter with ESPHome

I needed an air filter for the bus I live in and it needed to be able to mount to the wall out of the way. The clips on this design make it robust when assembled but easily disassembled when its time to replace the filter. Electronics I…

Downloads
84
Likes
29
Rating
0
P
PrintablesStigern

Dell D6000/D6000S Mount

Needed a simple bracket for keeping my docking secured under my desk.

Downloads
83
Likes
8
Rating
5
P
PrintablesHitLuca

Levoit Core 300/300S activated carbon insert

Update 1 Added a 6x3 magnet version for the carbon container, you will not need the turning tool anymore and instead will need to source 8 to 10 6x3 magnets. Removing the lid can be easily done by using some tweezers inserted into the…

Downloads
82
Likes
15
Rating
5
P
Printablesin3d

FEINWERKBAU 300/300S Piston buffer

Piston pad for Feinwerkbau 300/300S with flexible filament code number 15001273 Print instructions Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 100 Filament_brand: Sunlu…

Downloads
80
Likes
4
Rating
0
P
PrintablesGagi

Nissan 200sx silentblock bushing

TPU stabilizer silentblock for Nissan 200sx S13. 100% infill 6 perimeters wall

Downloads
76
Likes
11
Rating
0
P
PrintablesJanYko

Samsung SWA-9200S Longer adjustable speaker wall mount holder (keyhole mount)

Remix of FredRaket's Pioneer speakers wall mount for Samsung SWA-9200S speakers or any speaker with keyhole mount

Downloads
74
Likes
8
Rating
0
P
PrintablesQbitPrime

LEVOIT 200S-P Air purifier - Air Deflector

Original the air of this purifier would come out on top, blowing straight up. I wanted it to blow forward to create a better air circulation. This air deflector is being installed by simply pushing it into the vent cover.

Downloads
73
Likes
12
Rating
0
P
PrintablesAndrej Klinkon

Lure with big lip 100sp 3x6mm steel balls

Lure with big lip 100sp 3x6mm steel balls , lure printing with Petg transparent , resolution 0.08 , without supports. Gluing 2 parts with superatack , you need to print centring pins for assambly lure together . enjoy

Downloads
73
Likes
8
Rating
0

nissan 200sx s13/ 180sx Rear end interior SCANED

Profesional scanned high resolution nissan 200sx s13/ 180sx Rear end interior. Category: Automotive

Downloads
73
Likes
6
Rating
0
P
PrintablesBowdenBuilder

Airbus A300-600ST Beluga Kit Card

The Airbus Beluga is a unique and iconic cargo aircraft designed to transport oversized cargo, including airplane parts and other large items. Officially named the A300-600ST Super Transporter, it is nicknamed "Beluga" due to its…

Downloads
72
Likes
9
Rating
0
P
PrintablesJoel Pang

Hifiman HE400SE Grilles used with Original Ring

The height of the base has been reduced by 0.2mm, enough for 2 layers on the bottom. This allows it to be used easily with the original retention ring. However, it could be a user error on my end. On the original model, the nubs could be…

Downloads
72
Likes
3
Rating
0
P

Front Panel Modification for Phanteks Eclipse P400S

Print instructions: Printed with PETG. Infill 15-20%. Print the thread and nut without support . For the dust filter I used PVC sheet, 0.45 mm thickness with 1 mm holes , fixed in place with super glue This is an unofficial,…

Downloads
71
Likes
5
Rating
5
P
PrintablesJosefson

Samsung SWA-9200S Repro-mount

Corner and furniture bracket for rear speakers SWA-9200S of Samsung soundbar and others. Any filament can be used, minimum 3 perimeters, 20% fill. Requires 2 screws for installation, one additional screw into the speaker hanging hole,…

Downloads
69
Likes
2
Rating
0
P
PrintablesZoroSeerus

Z100s, 3D Printed Symmetric Wireless Mouse for Logitech G305

GUIDE https://www.instructables.com/Z100s-3D-Printed-Symmetric-Wireless-Mouse-Guide/ VIDEO GUIDE: https://youtu.be/o0P37Avcor0 -60g with AAA. Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable…

Downloads
69
Likes
7
Rating
0
P
PrintablesFlatcurve

ZWQ Viper S200s Foam Dart Blaster Rear Ring Pull

This is a ring pull for the ZWQ Viper S200s that mounts to the top of the slide using four M3 bolts. There is a version for countersink bolts and normal cap head bolts. The ring pull sits low enough to not obscure the sights, but is still…

Downloads
66
Likes
19
Rating
0
P
PrintablesVoronwë

Go-Pro mount Kawasaki Z1000SX Beeline

I recently bought a Beeline navigation device for my motorcycle. The mounting option for my type of motorcycle were either limited location wise, or bulky and ugly otherwise. So I decided to create my own option. In the cockpit attached…

Downloads
66
Likes
12
Rating
0
P
PrintablesFatal Error

Adaptor click connect for pressure washer BLACK&DECKER/PW1700SPM

Object: Pressure washer Model/Type: BLACK&DECKER/PW1700SPM Part: Adapter click connect - connector between hose and pistol. Pressure hose information: YL max 160bar/16MPa/2320Psi max 60C/140F 2014.11 Pressure pistol: Annovi Reverberi I…

Downloads
66
Likes
3
Rating
0
P
PrintablesDocHertz

Connector for th SHH!ot silencer for the PP700S-A airgun.

I made the SHH!oot silencer ( https://www.thingiverse.com/thing:4552394 ) for my 4,5mm Artemis PP700S-A airgun only to find out that the silencer didn't fit. Close inspection of the original photos also showed a different muzzle on the…

Downloads
63
Likes
5
Rating
5
P
PrintablesJavier Viquez

Samsung fridge RS22T5200S9 water/ice dispenser drip tray

This tray is intended to catch water drops and ice chunks after dispensing on the Samsung fridge RS22T5200S9 (and similar models).

Downloads
62
Likes
4
Rating
5
P
Printablesmafikes

Twinstar III 300S Light Shield

I printed it with ASA and PETG and it is okey. Need to print two pieces, it is higher than my printer. From inside I made silver tape to reflect light back to the aquarium.

Downloads
62
Likes
3
Rating
0
P
PrintablesR.R.

Mercedes-Benz 300SLR Mille Miglia, 1955

1927 entered into history as the year of birth for the Mille Miglia, the famous 1,600 km racing course through Italy. By 1930, the name of Mercedes-Benz was closely bound up with this endurance race. And the first victory came in 1931 for…

Downloads
62
Likes
5
Rating
0
P
PrintablesLuccus

Wiznet EVB-Pico2 Case (W6300, W6100, W5500, W5100S)

This is a small case for the Wiznet EVB-Pico2 boards. It provides easy access to the two buttons but covers the LEDs (I printed it using transparent PETG). The pin headers are also covered, though there is some space above and below the…

Downloads
60
Likes
1
Rating
0
P
PrintablesNiko Caignie

Rugged Box for Hollyland Mars 400S Pro

A rugged case and insert for the Hollyland Mars 400S Pro system. It stores tight and fixed all components: Receiver transmitter Power Supply Up to 6 antennas Insert by me, box design by @Withy 's - Parametric 150x100x50 box Printing : No…

Downloads
60
Likes
8
Rating
0
P
PrintablesPieterV3D

Laptop Stand for Dell 17 5000Series

This is a simple laptop stand where you can print it without any top and bottom layers and play with the infill patterns and density to produce cool different stands. Also, you can increase or decrease the height of the model in the…

Downloads
60
Likes
5
Rating
0
P
Printablesbazzzzzzz

Tenways CGO800S Mudguard

Print this in TPU 100% infill flat on the buildplate .. unscrew the bottom screw that holds the fender and only loosen the one above.. slide the printed mudguard through the rail under the fender far enough that the metal part on the…

Downloads
58
Likes
5
Rating
5
P
PrintablesScatterthought

1900s Candlestick Phone

I designed this candlestick phone for a high school production of Newsies. There are similar models on the Internet, but I wanted to make one that's super easy to print and assemble. It doesn't require any supports or screws, has no big…

Downloads
58
Likes
2
Rating
0
P
PrintablesBubutech
Downloads
58
Likes
10
Rating
5
P
PrintablesАлекс Ло

DEXP Meat Grinder gear MS-2000S

Printing with Polyamide only

Downloads
55
Likes
3
Rating
5
P
PrintablesMr_mlk

Replacement PP700sa Rear Sight

Replacement rear sights for the SMK/Snowpeak PP700sa. The grub screw hole is designed for self-tapping with the original grub screw. Tinker Cad: Original Size or Plus 5mm (for using with a mod)

Downloads
55
Likes
1
Rating
0

nissan 200sx s13/ 180sx Engine Bay

Professional 3d high resolution Scanned Nissan 200sx s13/ 180sx Engine Bay Category: Automotive

Downloads
54
Likes
9
Rating
0
P
Printablesin3d

FEINWERKBAU 300 / 300S sliding ring

FEINWERKBAU 300 / 300S sliding ring code number 15001213

Downloads
54
Likes
4
Rating
0
P
PrintablesEmaxxs

Tappi piccoli per Telaio Ninja Kawasaki 1000sx (endcap)

Tappi Misura Piccola Telaio: Modello Ninja Kawasaki 1000sx Necessario Oring da inserire nell'apposito alloggio per avere una tenuta ottimale

Downloads
54
Likes
2
Rating
0
P
PrintablesGagi

Nissan 200sx stabilizer bars silentblock

TPU silentblock for stabilizer bars. 100% infill 6 perimeters walls

Downloads
53
Likes
10
Rating
0
P
PrintablesDesmoDog

Ducati 900ss Hugger for 180 tire

This is a hugger for a 1991 - 1998 Ducati 900ss that is wide enough to clear a 180 rear tire on a 5.5" rim. It will likely fit other size Super Sports from the same era. It's shown on a steel swingarm but should fit an alloy swingarm…

Downloads
52
Likes
4
Rating
0
P
Printablespcpopper

DMC Numbered Embroidery Thread Bobbins: 3000s

I found the Stackable Embroidery Thread Case for my wife and then she asked for numbered bobbins to go inside. So I resized and added all possible current DMC numbers in the 3000 range.

Downloads
52
Likes
14
Rating
0
P
PrintablesOLoKo64

PR900S G2 / Stormrider TPU Buttstock – +5 mm Height, Softer Grip

This replacement shoulder pad is designed for the PR900S G2 (or Stormrider in some regions) . It offers improved comfort and control compared to the original hard pad. Print with TPU (flexible filament) Use 2–3 walls for ideal softness…

Downloads
52
Likes
4
Rating
0
P
PrintablesGagi

Nissan 200sx ignition lock lower sleeve

The lower sleeve which is attached to the ignition lock with two screws.

Downloads
50
Likes
13
Rating
0
P
PrintablesRyan

HIFIMAN HE400SE Headphone Stand

This is a headphone stand i modeled to fit my HIFIMAN HE400SE headphones. It can print without support. I printed mine on my Creality k2+ in PLA-CF. I included the F3d archive so you can modify the design. I included 2 versions, one that…

Downloads
49
Likes
5
Rating
0
P
PrintablesGigaPenguin

Hotwheels Mercedes 300SEL 6.8 AMG Display Base (24 hours of Spa Francorchamps 1971)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Downloads
49
Likes
18
Rating
0
P
Printablesprintberg

Scheppach Tiger 2000s holders for Tormek LA-122 Honing discs

This is a Tormek LA-122 honing disc holder that fits instead of the normal honing wheel of the Scheppach 2000s. Parts has been oriented in the proper direction for printing. Only the outer part of the inner retaining ring for the big…

Downloads
49
Likes
3
Rating
0
P
PrintablesSuperMatte

DX700S Wide Textile Nozzle

A simple textile nozzle for my cyclon vacuum. OD is 30mm.

Downloads
49
Likes
3
Rating
5
P
PrintablesCody Meyer

Felder K700S Zero Clearance Insert

My saw is a 2025 model year, it may not fit older saws. Will print on 256mm bed when rotated at roughly a 45* angle. Print Settings: Bambu X1C .06 Nozzle .03 Layer Height 4-Walls 15% infill Printed upside down - supports for the holes…

Downloads
48
Likes
6
Rating
0
P
Printablessailinginmud

Segway P100s Scooter Extension Plug Replacements

The extension plugs that came with my Segway P100s kept coming out and I didn't want to worry about losing them so I sketched up replacements. They fit very securely (I can't remove without a flat head screwdriver to pry them out) but…

Downloads
48
Likes
3
Rating
0
P
Printablesin3d

FEINWERKBAU 300 / 300S sliding ring

8 mm sliding ring for FW 300 / 300s code number 1700124 Print instructions Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 100 Filament_brand: Polymaker Polyflex Filament_color: Black…

Downloads
48
Likes
3
Rating
0
P
PrintablesPoing3000

PurrPleaser3000s - An Automatic Single Cat Feeder

PurrPleaser3000 Single This is the PurrPleaser 3000S, an automatic cat feeder for a single cat. With this cat feeder you’ve got a complete project to build your own feeder which automatically dispenses food for your cat over weeks.…

Downloads
47
Likes
23
Rating
0
P
PrintablesGagi

Nissan 200sx IAC valve plug

Cover for the IAC valve system

Downloads
47
Likes
8
Rating
0
P
PrintablesGagi

Nissan 200sx throttle valve gasket

Gasket under the throttle and on the other side of the intake Engine: CA18DET Printed with FLEXfilament

Downloads
46
Likes
8
Rating
0