Lego Compatible (32061.dat) Technic Engine Cylinder Head
This model is compatible with the lego system.
- Downloads
- 858
- Likes
- 72
- Rating
- 4.33
69 models
This model is compatible with the lego system.
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and designed a 3 loop + 3 blade…
My used dishwasher was missing these. STEP included.
This model is compatible with the lego system.
Tool holder for Single Screwdrivers. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 35,01mm W - 51,75mm H - 55,84mm We…
The notorious Playmobile Door Handles are prone to breaking or missing over the decades of usage, and since it seems I have myself lost some while I was kid I am now going to replace them for my daugther. Printed in Fiberlogy PC/ABS in…
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
New Paddle designed and shared at: Clocking Holster Paddle by Sheisster | Download free STL model | Printables.com Paddle and cogs are remix from FileFoundry's PT-111 Holster files. Holster is designed with a finger release and easy mount…
A drill bit is easy to turn once by hand, then you have to regrip and do it again. This design allows for continuous turning. Use one hand to hold and push the drill in, while your other hand cranks the drill bit around and around. Easy!…
Before you go further! This project is for personal use only. Any commercial use is forbidden Follow me on Instagram to keep up with latest designs Check out this project's Instagram - @StawiamKlocki.pl Read FAQ Follow MOC designer on…
This is a respin of GunplaMark’s very nice drybox design. I wanted to be able to stack the boxes with better stability though, so I patched the top corner brackets into a single piece, and adjusted geometry to provide a perfect fit when…
This model is compatible with the lego system.
self created model of the original Volkswagen-Tool T10613. It is used for postitioning the clutch in the gearbox with the code KUT.
Description Digital File to DIY 3D print a Wall or VESA Mount for Technicolor Xi6 (Videotron Helix) TV Terminal. Model match terminal design line. The mount can be screw to wall or at the rear of TV using VESA 50x50 or VESA 75x35 holes.…
The original leg is quite fragile and very expensive. So I made it by my own and you can see on the pictures the original (left) vs. 3D printed (right).
This is an adapter for dust collection of the Rikon 10" bandsaw. It may work for others as well. The stock dust extraction leaves a lot to be desired. The guide bearings under the cast iron top got jammed with dust. I decided to collect…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
This model is compatible with the lego system.
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Taking use of the MLX90614 (DCC/BCC) sensor (GY-906) I can measure the actual leaf temperature for getting "LeafVPD" measurement with Mycodo. You need to solder the wires onto the board (there is not enough height for Dupont pins!).…
Print with organic supports standing upright fits 1" peg board with 1/4" holes
Poliwhirl’s smooth, rounded body takes on a bold geometric presence in this low-poly style. Its iconic spiral stands out crisply against the faceted surface of its belly, giving it a striking visual contrast. The simplified curves of its…
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
This is a blank for sizing.
oleBox system - 3D printed boxes compatible with BITBEAM construction kit (therefore even with LEGO Technics/Mindstorms). The main purpose of MoleBox is covering a particular sensor or the entire module and simultaneously allowing…
This is easy installation stand for Pragotron IPJ 0612. No need any modification of clock, It's friendly to the original state! Just stick legs on the stand and screw the stand to the clock. 9.6.2022 update: added V2 stand to reduce the…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
If you print it standing up you have to be careful when tightening the screw. It can be printed sideways with support touching the printbed, do not put support inside the screw hole.
Material: ABS Handle modified with a cutout. Be careful during assembly, as the “claw” may break off during adjustment. The printout requires supports.
This model is compatible with the lego system.
Description Anycubic Kobra 2 MAX - Toolbox 061 Toolbox with 2 drawers . Installation tip : remove the end cap and two screws to easily slide into place. Printer: Anycubic Kobra 2 MAX Infill : 15%Brim : yes Skirt : No Support : yes, only…
This model is compatible with the lego system.
The engine cover/hood key for my mini excavator was not sized well and I was worried it would strip over time. I printed this one to replace it. It fits much better than the original. Example printed vertical (key hole down) in PLA-CF…
A minimal IKEA Skadis mount for a TENMA TEN01061 multimeter. It's a snug fit and the dial and probes are still functional when the multimeter is in the mount. Internal size of the mount is 36mm x 66mm x 48mm (D x W x H) with 11mm holes…
Design Concept These earrings showcase a unique spiral design featuring dynamic curves and vibrant colors, making them a standout accessory for any occasion. Usage Perfect for personal wear or as a thoughtful gift. These earrings add a…
A 3D topographic map just outside of Valdez, Alaska centered on my home. Located at BP61xb | 61.061533 -146.001906.
This enclosure is designed to house an MLX90614 IR temperature sensor together with a Seeed Studio XIAO ESP32-S3 in a compact and streamlined form. Instead of screws or clips, the design relies on adhesive assembly : The lid is glued to…
print with 100% infill and supports layer height 0.2mm
Purpose I have a Brine Distributor Type 2061/2062 from FRANK GmbH. It's made out of plastics and uses some non-standard valve handles. I use the brine distributor to choose between different heat sources for my heat pump, among them an…
G3061 PD65W mini hot plate bottom plate Installation Requires 4 m3 screws and 1 cm diameter rubber feet.
If you happen to be one of the few people who: have a bunch of iPod Nano 4G prototype boards ( 920-0614-03 ), and have a 3D printer then this is the model for you! This is as simple protective case which exposes the two buttons and all…
Pilot holes in bar will need drilling for your marking pin material. Cut off a nail and use that as the drill. A little superglue will hold a lose pin in place. Print off lots of bars - one for each standard mortice dimension.
This is a replica of the miniature 01-061 from the "Personalities and Things that go Bump in the Night Series" by Ral Partha (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:RP-01-061.jpg&oldid=273058 )…
I recently bought a G3061 PD65W Hot Plate to help with SMD soldering, and decided to add a VL53L0X ToF sensor to automatically start and stop the heating when it detects a PCB. Requires: 1x G3061 PD65W Hot Plate:…
A case for the C7061 "World's Smallest Geiger Counter"
This is a test bench for Direct Drive Tech's M061C_111 motor. The motor can be installed using M2.5 bolts with a length of 5 to 12 mm.Please let me know if there are any mistakes.
This is a headphone stand originally designed to fit the Sennheiser SDW 5061 headphones, while being charged by the magnetic adapter. Although similar chargers exist, this one will cost you much less than the commercial. The panels are…
Gridfinity cutout for Klein Tools Coax Cable 2-Level Radial Stripper VDV110-061 Made with onshape: https://cad.onshape.com/documents/17125e55de6e669e4b6683cb/v/b5e72c54f532c8aee475e30c/e/f5d478e3e484a07373c4c985
Work In Progress, not yet printed Roco 0918S Replacement housing for 0615S Motor Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.12 Infill: 100 Filament: PolyMaker PLA Notes: Work In Progress,…
Mounting holder for electronics of controller located inside the clock. The clock uses a 5V power supply source/USB adapter. Many thanks to Mirda.urban2 for Arduino and electronic Design. I modified a little bit electronic scheme and…
Zatím jsem netiskl a neotestoval... Je to beta verze, vymodelovaná, podle originálního kotouče. Jakmile to otestuji, dám aktualitu. I haven't printed or tested it yet... It's a beta version, modeled after the original disc. I'll update as…
Needed to add a cup holder to my excavator and made this. Uses the existing mount holes for the canopy. Printed in pla cf
G3061 Mini Hot Plate – 3D Print Optimized Chassis This is a functional replica of the original factory enclosure for the G3061 Type-C Mini Hot Plate . If your original shell melted, cracked, or you just want to customize the look of your…
Makes the SMALLRIG 3061 (ArcaSwiss for DJI RS) compatible with Zhiyun Weebil 3s (and maybe also others). simply remove the teeth row on the smallrig plate and replace it with this thing.
A very rough model of NorVel's Big Mig .061 nitro model engine for RC plane, with all the correct dimensions. Muffler and needle valve not included. This can serve as a placeholder for when you are designing a plane or whatever, use this…
Front strut for Losi Junior T 1:10 scale R/C model truck. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: No Supports: No Resolution: 0.2mm Infill: 25% Category: R/C Vehicles
my mosquito net door did not come with the corners so I reverse engineered them to work, I recommend printing at 4+ wall count and 50%+ infill.
3D printing without support Use 2 perimeter wall thickness, 0.2 mm layer height, 10% infill The Wall https://multiboard.io installation on: https://www.printables.com/model/1074671-raised-multiconnect-generic-connector-for-multiboa
English below Pensant avoir perdu la goupille du rotor de l'hélicoptère (Playmobil 9518), j'en ai modélisé une de remplacement. Finalement la pièce d'origine à été retrouvée (en rouge). Le design est légèrement différent de celle…
Allows to mount MGN9 railt to SmallRig 2061 set. Requires M3 screws and nuts
Parametric 6.1cm tall object with rounded circular geometry and a fluid pattern. Engineered for precise 3D printing.
A socket to mount speakon over the original pheonix connectors. See the before / after I used 3*15 wood screws to mount the speakon. Solder needed on the speakon side.
A replacement for worn-out or lost Yamaha Stage Custom-compatible floor tom leg bracket gaskets, the piece between the bracket and the shell. Yamaha's replacement brackets come without gaskets. Fits: Yamaha Stage Custom-compatible floor…
Design Concept These earrings showcase a unique spiral design featuring dynamic curves and vibrant colors, making them a standout accessory for any occasion. Usage Perfect for personal wear or as a thoughtful gift. These earrings add a…
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
3D printing without support Use 2 perimeter wall thickness, 0.2 mm layer height, 10% infill The Wall https://multiboard.io installation on: https://www.printables.com/model/1074671-raised-multiconnect-generic-connector-for-multiboa