Search results: 105

Sort order

681 models

P
PrintablesMouky

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
769
Likes
48
Rating
5
P
PrintablesUncleFrankSays

UFS-105 Copper Pipe Diameter Gage, External Measurement

This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…

Print approx. €1.69–€2.07 excl. taxPreliminary estimate for one variant

Downloads
398
Likes
28
Rating
0
P
PrintablesBryant

Tischbein verstellbar 105mm (+20mm)

sehr einfach zu druckendes & stabiles Tischbein

Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant

Downloads
90
Likes
6
Rating
0
P
Printablesnan

Garmin Edge 1050 Adapter for K-Edge Max XL Mount

Simple Garmin Edge 1050 Adapter to move the bike computer 10mm forward if there is not enough space for mounting. With the adapter, the Garmin sits flush with the top of the handlebar. (Reason is because Garmin desided to move the Mount…

Print approx. €0.65–€0.80 excl. taxPreliminary estimate for one variant

Downloads
57
Likes
8
Rating
5
P
PrintablesPhilipp

AMB 1050/1400 Tool Mount for LowRider 3

This model prints with the recommended settings for all the other LowRider parts, 2-3 perimeters, 30% rectilinear infill, structural printing. The “AMB Tool Mount” has to be rotated for the best result, but it should work like this as…

Print approx. €5.24–€6.41 excl. taxPreliminary estimate for one variant

Downloads
51
Likes
10
Rating
5
P
PrintablesFranspai

Netgear GS105 switch rack mount for the microlab

The tolerances are a bit tight so you might need to sand it down a bit.

Print approx. €2.21–€2.71 excl. taxPreliminary estimate for one variant

Downloads
39
Likes
8
Rating
0
P
PrintablesKasem427

MTG TCG Card Divider Organizer with WL-1050 Address Label V2

New Version of the MTG TCG Card Divider Organizer with WL-1050 Address Label This is a bit wider at 73mm x 92mm+15mm per my friends' specs to fit his MTG box. So redid this version with basically square windows, tried to optimize this for…

Print approx. €0.62–€0.76 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
25
Likes
2
Rating
0
P
Printablesthiebes

Mount for Hamamatsu Avalanche Photodiode (APD) C10508-01 with Voronoi vents

This is a mount designed for the Hamamatsu C10508-01 Avalanche Photodiode (APD) module . The purpose of the mount is twofold: 1) to enable the integration of the APD module into optomechanical setups; and 2) to provide a protective cover…

Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant

Downloads
16
Likes
1
Rating
0
P
PrintablesMarian Vybostok

Atari 1050 drive lever 5.25 inch

Just push onto the original metal lever. Fuzzy skin with 0.2mm/0.2mm looks good when printed on textured printbed upside down, normal looks better when printed on glossy/satin sheet. Top drive is with the printed lever/bottom has…

Print approx. €0.16–€0.19 excl. taxPreliminary estimate for PETGSource material: PET

Downloads
14
Likes
0
Rating
0
P
PrintablesOxyfraggle71

Bracket for foam injector (compatible with pressure washer Kränzle K1050 TST)

For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…

Print approx. €4.68–€5.72 excl. taxPreliminary estimate for one variant

Downloads
8
Likes
1
Rating
0
P
Printablesmahluni

Bumper / Kantenschutz für navimow i Serie - i105e und i108e

Einfacher Kantenschutz für die navimow i Serie. Sie sind straff entworfen, so dass ein Aufstecken genügt. Es ist kein Schrauben oder Kleben erforderlich. Ich habe mit PETG gedruckt / 100% Infill

Downloads
1,356
Likes
65
Rating
4.75
P
Printablesrsfuhrer

CF-105 Avro Arrow

The CF-105 Arrow was a supersonic interceptor developed in the 1950s. I love this beautiful plane and I felt a need to model it, despite having no idea how to model such complex shapes. Please read on to learn some history and to learn…

Downloads
1,268
Likes
81
Rating
3.67
P

TP-Link SG1005P | SG105 10-inch Rack Mount

A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…

Downloads
1,095
Likes
89
Rating
5
P
PrintablesBlenderBender

TP-Link SG105 10 inch rack mount

This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…

Downloads
724
Likes
64
Rating
4.5

Fendt 1050 Vario Wall Art

If necessary, the model can be cut in the slicer and the scale of the model can be increased.

Downloads
710
Likes
48
Rating
4.67
P
PrintablesBuildX

#0105 STRONG Split Key Ring - Meets the Demands of Everyday Use!

*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** What's the strongest split key ring out there, gram for gram?…

Downloads
567
Likes
71
Rating
5
P
PrintablesKIL0

TP-Link TL-SG105 mount

Mount for TP-Link TL-SG105 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.

Downloads
534
Likes
47
Rating
4
P
PrintablesAntigreen

MPCNC Primo AMB 1050 FME 43mm tool mount

This is a 43mm spindle mount - based on AMB 1050 FME-1. (including an adapted NutTrap and Drill Guide) All is fitted for the MPCNC Primo 25mm version! ( https://www.prusaprinters.org/prints/37292-mostly-printed-cnc-primo-f-25mm-mpcnc )…

Downloads
516
Likes
21
Rating
0
P
PrintablesSquirtle

Netgear 5 Port (GS105) Switch holder

The switch can be mounted under a table, on the wall or wherever you can fit 2 screws in it If you are looking for the same holder for the 8 port switch: https://www.thingiverse.com/thing:3278568 Print instructions Category: Computer…

Downloads
508
Likes
60
Rating
4.8
P
Printablesspoonwzd

EVE 105Ah Modular Battery Pack

This is my design for a modular cell pack using EVE 105Ah LiFePO4 cells. PLA should be fine to use unless your use case will see higher temperatures than this material can handle. Print Settings Rafts: No Supports: Yes Resolution: 0.2…

Downloads
501
Likes
52
Rating
0
P
PrintablesBasementLAB

Ventilation Grille - Duct Cover 105x105mm / 105x210mm / 210x210mm / 210x105mm / Ø105mm - Griglia ventilazione a bocca di lupo

Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…

Downloads
472
Likes
92
Rating
5
P
Printableslifeandfate

Mitsubishi AC - ESP32 C3 SuperMini Case - CN105

I wanted to make a simple case for the smallest ESP32C3 that I could find for use within a Mitsubishi AC. There is a CN105 port on several Mitsubishi ACs that allow you to control the unit remotely without spending $100+ on an official…

Downloads
457
Likes
34
Rating
5
P
Printableshazardous89

Lego Millenium Falcon Wall Mount - 75105

Decided to make a simple wall mount in OnShape for an old Millenium Falcon lego set I've had collecting dust for years on a shelf. Lego Set 75105 This was intended to be a rough draft but it worked well enough that I didn't bother making…

Downloads
454
Likes
56
Rating
5
P
PrintablesJoe's wood'n 3D

Sliding Puzzles - Horse - Saturn - BO 105 - YT Jeffsy

These are some remixes I've created from the great sliding puzzle by Nikolaos Babetas . I've added a horse head (reused it from my horse bookmark ), a Saturn style planet (from my Saturn bookmark ), a pictograph of BO 105 (the best…

Downloads
454
Likes
76
Rating
5
P
Printablesfente

Segway Navimow i105e + i108e Messerteller für 6 Klingen und + 2cm Schnittbreite

Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…

Downloads
451
Likes
30
Rating
5
P
PrintablesSi1verEag1e

RC 1.9" 105mm FLEX tire inserts (Specially designed for 3DSets Max van )

My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…

Downloads
450
Likes
90
Rating
5
P
PrintablesSensha_Vor

AMX 13 105

Discord for updates: https://discord.gg/yfdSb Do take note the Brown Stand on the other AMX 13s is not printed for this model. Some parts need supports Tank Antenna used filament Printed using Bambu Matte PLA

Downloads
418
Likes
59
Rating
5
P
PrintablesDiew

10 inch rack TP-Link SG2210P - SG2008 - SG105-M2

It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…

Downloads
415
Likes
45
Rating
5
P
PrintablesIvanov design

Cabin filter cover Renault Laguna 3 52410566

Wip. Replacement for cabin filter cover Renault Laguna 3 52410566. Please notify me in the comments about inconsistencies. Print Settings Printer Brand: Tronxy Printer: Tronxy X5SA/X5ST/Pro/2E/D01 Plus Rafts: No Supports: Yes Resolution:…

Downloads
350
Likes
25
Rating
0
P
PrintablesRob

Garmin Edge 1050 computer adapter

Adapter plate for Garmin 1050, pushes 1050 forward so you can use your current mount. I printed these Garmin male mount side down with supports. The red model in the picture is PLA during prototyping, final model (black) I used PETG. I…

Downloads
331
Likes
10
Rating
0
P
PrintablesDimitri Fendel

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Downloads
329
Likes
21
Rating
4.5
P

TP-Link SG1005P | SG-105 19-inch Modular Rack Mount

A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…

Downloads
327
Likes
34
Rating
5
P
Printableswedgeworks

105mm Round

Can be printed all at once or in pieces, depending on your printer size. The Fuze can be a little tight going on/off the first couple of times. Be patient and work the threads back and forth. It'll eventually move nicely. I suggest using…

Downloads
324
Likes
62
Rating
5
P
Printablesjnr0790

TP Link TL-SG105 Mounting Plate

This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…

Downloads
320
Likes
22
Rating
5
P
Printablestato_713

Samsung Galaxy A10 a105 case

Originally published here: Samsung Galaxy A10 a105 case by tato_713 - Thingiverse This is the case for the Samsung A10; for the A10e see this post . Some of the models are designed for rigid materials and others for flexible ones. The…

Downloads
313
Likes
14
Rating
5
P
Printablesscolin221

Cleat Pedals - Clip into Shimano Road Bike Pedals - Remixed for Shimano SPD-SL PD-R550 and 105 PD-R7000

This is a remix of https://www.thingiverse.com/thing:3669328 . I've gotten permission from the original creator to post this remix. I've made a simple edit to the STLs to remove the raised edges from the bottom to allow compatibility with…

Downloads
311
Likes
20
Rating
0
P
PrintablesAngel Rivas

U1 10" Inch Rack Mount for Raspberry Pi 4 and TL-SG105

UPDATE: 25/02/2025 I have updated the design, to compensate for the MicroSD card in the Raspberry Pi, and also adjusted the end of the router back to fix some occasional XYZ errors while printing. U1 10" Raspberry Pi 4 and TL-SG105 Rack…

Downloads
307
Likes
38
Rating
4
P
Printablesl3LueSkull

Netgear GS105 Lan Switch Holder

This is an Easy to Print Small Holder for the Netgear GS105 Lan Switch I was Searching for a Similar Model in the Web but didn't Find anything (maybe I searched not good enough) well whatever, I decided to just make my own, the Result You…

Downloads
303
Likes
19
Rating
5
P
PrintablesDanielmaxsteel

TP Link TL-SG105 under desk mount

I designed this holder for mounting the TP-Link SG105 under my height adjustable desk. I used 2xM3 screws with fitting nut and 2x M3,5x16mm wood screws. I placed the nut inside the Screw-Terminals of the switch and fastend the screws…

Downloads
302
Likes
40
Rating
5
P
PrintablesJascha3D

TP-Link TL-SG105 10-inch Rack Mount

TP-Link TL-SG105 10-inch Rack Mount 🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack! This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying…

Downloads
295
Likes
27
Rating
0
P
PrintablesBak3

tplink tl-sg105 1U rack shelf

1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height

Downloads
282
Likes
50
Rating
0
P
PrintablesTheNewBlood Dan

ZOTAC/ASUS/MSI Low Profile 1050ti FULL SIZE GPU Bracket Template

So I got a new GPU on Ebay and it isn't coming with the regular size GPU bracket, so I figured I could design my own by modifying and referencing models done by Gushie, rasarmg and pankomputerek! I will fine tune the measurements once I…

Downloads
277
Likes
10
Rating
0
P
PrintablesMarkuzzzi

Parkside PNKP 105 B1 Glue Gun Station for Gridfinity

Concerning tool purchases, I make compromises when a machine or tool is not in use very often. Hence I bought a cheap glue gun from Parkside (LIDL). However, when it comes to having a tidy workplace and structured tool organization, there…

Downloads
275
Likes
43
Rating
0
P
PrintablesTdewulf

TP-link TL-SG105 mount

Wall and ceiling mount TP-link TL-SG105 made in thinkercad 3mm thick walls

Downloads
269
Likes
16
Rating
5
P
PrintablesThomas

Segway Navimow i105/i108 Messerschutz + Messerteller

Messerteller ist 220mm groß mit Messerklingen 254mm Schnittbreite mehr geht nicht. Messerschutz wurde auch erneuert und für den größeren Messerteller vergrößert. Mähgeräusche etwas lauter. Mähtest laufen noch. Was benötigt wird…

Downloads
267
Likes
14
Rating
0
P
PrintablesLucendi

Adapter for Garmin 1050 bike computer

The Garmin 1050 is larger than previous models and does not fit the standard computer mounts. This adapter moves the bike computer 10mm forwards and 6mm upwards. Allowing it to be mounted to standard computer mounts. I printed mine in…

Downloads
267
Likes
16
Rating
0
P
Printablest0b1

Hanger for TL-SG105 network switch

Wall mounting bracket for our TP-Link TL-SG105 network switch.

Downloads
264
Likes
23
Rating
5
P
PrintablesBasti.mp4

TP-Link SG105E 10" Rack mount

Little remix to mount a TL-SG105E in your 10" Rack. You have to remove the two little screws under the switch. After that you have to slide the switch in the mount until its flush with the front. The last step is adding two M3x6mm screws…

Downloads
257
Likes
18
Rating
5
P
PrintablesMicah Justice

IKEA Replacement bed slat bolt and sleeve, 104850 & 105160

I needed one of these plastic self locking bolt and sleeve assemblies for an IKEA Kura bed I bought thirdhand, that was missing some. So I took out one good one, measured and modeled up a similar design. Printed with 0.4mm nozzle in PETG…

Downloads
257
Likes
10
Rating
5
P

Avro CF-105 Arrow Kit Card

The Avro Canada CF-105 Arrow was a twin-engine, delta-wing interceptor proposed to be the primary interceptor of the Royal Canadian Air Force in the 1960s. Its development began in 1955, and the project was canceled in 1959 with only 5…

Downloads
257
Likes
54
Rating
5
P
Printablesnamakan

Gridfinity Canon RF Lens Bin (16mm 50mm 24-105 f/4 L)

I didn't see any lens bins for gridfinity for these smaller Canon RF lenses so I modeled simple 2x2 bin for them. It's designed for and tested with the Canon RF 16mm F2.8 STM and RF 50mm f/1.8 STM lenses, but it should work for any lens…

Downloads
257
Likes
48
Rating
5
P

TP-Link SG1005P | SG105 | OC200 6-inch Rack Mount

A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…

Downloads
254
Likes
22
Rating
5
P

LEGO DAF XF 105 FT 410

LEGO DAF XF 105 FT 410

Downloads
250
Likes
43
Rating
0
P
Printablesthall72
Downloads
250
Likes
25
Rating
5
P
PrintablesFeetOffTheTable

Paint Roller Tray - 105mm

For rollers up to 100mm width, this tray makes it easy to roll your paints professionally. Print on it's front to make it supportless. This build uses about 30g of filament with only 2 walls.

Downloads
240
Likes
24
Rating
5
P
PrintablesvagueDirector

Terminal cover / bracket for 75Ah 90Ah and 105Ah LiFePO4 Cells

These caps are a copy of a design by another company, which made these using an injection moulded process. They fit cells with top dimensions 130x36mm. This includes 75Ah, 90Ah, 105Ah cells and probably more. These LiFePO4 cells are…

Downloads
232
Likes
22
Rating
0
P
PrintablesNomis

Handle for Badger 105 Airbrush

Needed something to help stabilize the airbrush in my hand, fits Badger 105, Nasedal airbrush & Fengda FE-183K AB Handle 2 Should fit any body that is about 10.5mm to 11mm and and air intake of 8.5mm to 9mm AB Handle 4 Should fit any body…

Downloads
229
Likes
37
Rating
5
P
PrintablesJace1969

Avro Arrow Royal Canadian Airforce CF-105

As a special request to Criag. This was all I could find buddy. Hope its what your after : ) Good luck Cheers Jace

Downloads
227
Likes
27
Rating
0
P
PrintablesAaronG

NVIDIA Jetson Orin Nano Developer's Kit Case for Adafruit Can PAL (TJA1051T/3) & Honeycombed bottom

This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…

Downloads
225
Likes
8
Rating
4.67
P
PrintablesMr Robot

SDrive-MAX Case - 1050 Style

The SDrive-MAX is an amazing device for your Atari 8-Bit; think of it as an unencumbered, open source, enhanced version of your SIO2SD. For all its awesomeness I felt the available case designs were letting it down a lot. I’ve been…

Downloads
224
Likes
18
Rating
0
P
PrintablesSpeeter

TP-Link TL-SG105 mount for IKEA SKADIS

An easy way to mount you TP-Link switch to the SKADIS pegboard

Downloads
214
Likes
20
Rating
5
P
PrintablesCeleste

Sturdy 10 inch rack mount for the TL-SG105E consumer network switch

------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…

Downloads
211
Likes
36
Rating
5
P
Printablesflyingtoaster0

Mount For D-Link DGS-105 Network Switch

This is a mount for a D-Link DGS-105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…

Downloads
201
Likes
53
Rating
5
P
PrintablesBasementLAB

Futuristic Design Handles - Maniglie design futuristico 105x240x45mm

Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks

Downloads
200
Likes
51
Rating
5
P

Fire Sword for LEGO CMF 29 71052 - Bionicle Tahu Cosplayer Minifigure | 57488 32558 Bionicle Weapon Toa Flame Sword 2 x 12 with 2 Pin Holes

The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…

Downloads
200
Likes
35
Rating
0
P
Printablespapierr

Canon 105mm pour U-boot

Petit canon de 105mm pour mon u-boot

Downloads
200
Likes
17
Rating
0

Lada 2105 carburator velocity stack for 1.5l engine

Velocity stack for a Lada carburator. I recommend ABS/ASA/CF NYLON for printing.

Downloads
199
Likes
23
Rating
0
P
Printablesflyingtoaster0

Mount for TP-Link TL-SG105 Network Switch

This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…

Downloads
197
Likes
13
Rating
5
P
PrintablesFegger

Fendt 1050 Bruder front hitch

Front hitch for the Fendt 1050 Vario model from Bruder.

Downloads
196
Likes
15
Rating
5
P
Printablesthall72

Lego Compatible (11055.dat) Flag 2 x 2 Square (Thick C-Clip)

This model is compatible with the lego system.

Downloads
195
Likes
32
Rating
0
P
Printablesangrygriffin

Sidchrome Replacement Toolbox Inserts - 12110, 12130, 13110, 14105, 19105, 390-6, 403-6, 407-9, 429-8, 565-0

This is a replacement insert for the Sidchrome tool sets shown. It will likely not fit other eras than those shown, as some of the individual tools changed dimensions frequently over the years. Found these files useful? Buy me a coffee !…

Downloads
194
Likes
5
Rating
5
P
Printablesthall72
Downloads
188
Likes
34
Rating
5
P
PrintablesSkovik

Atari 1050 (XF551) floppy PSU Case

Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…

Downloads
187
Likes
9
Rating
5
P
PrintablesHenri S

tp-link TL-SG105PE Switch 10 inch rack holder

You need zipties for the power brick. The switch slides into the mounting brackets and locks itself in place. There is also a version for 19 inch racks:

Downloads
186
Likes
30
Rating
5
P
PrintablesMarlow

M101 105mm towed Howitzer approximately 1/47 scale.

The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using…

Downloads
185
Likes
26
Rating
0
P
Printablesthall72

Lego Compatible (30105.dat) Minifig Helmet with Bat Wings

This model is compatible with the lego system.

Downloads
185
Likes
36
Rating
0
P
Printablesdergogo

Featherboard Holder Scheppach HS105

This is the holder to attach this awesome Featherboard to the Scheppach HS105 table saw, might also fit on other table saws

Downloads
183
Likes
34
Rating
5
P
PrintablesBrian Berkley

Mr. Bulletfeeder Controller Mount for Dillon 1050/1100 SPLINED

This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…

Downloads
181
Likes
17
Rating
4
P
PrintablesDiew

10 inch rack TP-Link OC200 - SG105

remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.

Downloads
175
Likes
9
Rating
0
P
PrintablesAndy Forsberg

105 mL Coffee Scoop

Why scoop endless scoops of coffee to get your coffee maker going? (particularly office coffee makers??) This scoop has a volume of about 130mL which equals about 8.8 Tablespoons. If you have a 14 cup coffee maker this means you only need…

Downloads
171
Likes
9
Rating
5
P
PrintablesiKlaus

TP-Link TL-SG105 Skådis Mount

Mount for TP-Link TL-SG105 Switch on IKEA Skådis pegboard

Downloads
170
Likes
14
Rating
5
P
PrintablesFilamentor

Blade Disk Adapter for Navimow i105e

A custom-designed adapter ring. This modification allows you to mount 6 blades instead of the standard 3. Materials Needed: 3 x M4 x 8mm screws 6 x M4 x 6mm x 6mm inserts Printing Specifications: Material: PETG Infill: 100% Layer Height:…

Downloads
169
Likes
15
Rating
0
P
Printablesse038

CASIO F-105W/F-91W Watch Strap

UPDATE: Reworked also to fit the F-91W. Print Setting Material: TPU Layer Height: 0.20mm I printed with Overture High Speed TPU 95A.

Downloads
168
Likes
25
Rating
5
P
PrintablesPfemfi

Navimow Messerscheibe i105e / i108e - 7 Klingen

Moin, original sind nur 3 Klingen an der Messerscheibe, war mir zu wenig für ein gleichmäßiges Schnittbild. Da es fast nur platte Scheiben ohne Design und mit Einpressgewinde online gibt, habe ich mir ein eigenes Modell erstellt. Warum 7…

Downloads
168
Likes
10
Rating
0
P
Printablesmorozgrafix

Mamiya Sekor Rear Lens Cover for 80mm f/2.8, 105mm f/3.5, 135mm f/4.5, 65mm f/3.5 TLR lenses

Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…

Downloads
167
Likes
16
Rating
5
P
PrintablesKermit

Bruder RC-Model Fendt 1050 Radnabe 6mm

Radnabe für RB 35 Motoren (6mm Achse) für die Standard Bruderfelgen des Models Fendt 1050. Version 5: für M3 Schrauben (2,6mm Löcher) inkl. Zentrierung und Fase inkl. Wellenfixierung mit Madenschraube (2,5mm Bohrung)

Downloads
165
Likes
33
Rating
0
P
PrintablesW5AUG

Xiegu CE-19 enclosure for Xiegu G90 or X5105

Protective box for Xiegu's CE-19 interface, used for the Xiegu G90 and X5105 HAM radios. Print either bottom or bottom ONLY AF-CON. The latter only has the Radio and AF-CON holes open, the other has all openings. The box is printed so…

Downloads
162
Likes
21
Rating
5
P
PrintablesMarcin Rzycki

H0e Locomotive LSM 03 / Kato 11-105 11-106 11-107 N>H0e

This is a fictional narrow-gauge diesel locomotive LSM 03 in H0e scale. I designed and modeled it from scratch in SketchUp. Done to be printed in lcd resin printers. Just add support. Designed to fit the Kato 11-105, 11-106 or 11-107…

Downloads
161
Likes
21
Rating
5
P
Printables808Asher

Pokemon Go Community Day Classic #105 coin - Eevee

Coin designed for Pokemon Go community day Classic. Coin reflects selected Pokemon for community day July 5th and 6th 2025. Front shows Eevee and back shows the Eevee evolution. Glue coin halves together after printing. Paint if desired.…

Downloads
158
Likes
36
Rating
5
P
PrintablesKevinU_PA

IP5328P Powerbank Case with Loop for 60x105 battery

Modeled and printed this back in the summer of 2022. Sadly, the battery have already degraded significantly when I finished modeling & printing this but I still see value in this model I made. Remix it on Onshape:…

Downloads
157
Likes
17
Rating
4
P
Printableslucasyas

Scheppach HS105 Bevel Gear (height adjustment)

I stripped my oem gears and couldn't get replacementr parts so I just printed them. Made prototype out of PLA and it seems plenty strong. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2…

Downloads
157
Likes
18
Rating
5
P
PrintablesANYBY

LiFePO4 100/105Ah Super STRONG Fully Modular Case + BMS CASE

Printed in petg, the more perimeters, the stronger it will be. I suggest inserting m3 bolts in the round protrusions as in the photos, otherwise they may break, also you may use a bit of glue to make the whole thing non-separable… I used…

Downloads
156
Likes
25
Rating
0
P
PrintablesMaNDRaXe

Dewalt DCB105 Wall Mount

For whatever reason Dewalt didn't include any way to mount this charger on the wall. I've been thinking about an elegant way to wall mount it but couldn't find one that satisfied me until I had a 3D printer. While looking for existing…

Downloads
155
Likes
17
Rating
0
P

CF-105 Avro Arrow

This is my highly detailed CF-105 Avro Arrow CAD model. If you do go on to print the model, please post a make. Enjoy the print! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.20 Infill: 20%…

Downloads
154
Likes
34
Rating
4