Tischbein verstellbar 105mm (+20mm)
sehr einfach zu druckendes & stabiles Tischbein
- Downloads
- 90
- Likes
- 6
- Rating
- 0
75 models
sehr einfach zu druckendes & stabiles Tischbein
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
My first #printedtrophy attmept showed me, that the original foam in 1:10 tires is way too soft for a van full of spare parts and batteries. So i started experimenting. This is my 9th iteration of FLEX inserts, tested in Fiberlogy…
Can be printed all at once or in pieces, depending on your printer size. The Fuze can be a little tight going on/off the first couple of times. Be patient and work the threads back and forth. It'll eventually move nicely. I suggest using…
For rollers up to 100mm width, this tray makes it easy to roll your paints professionally. Print on it's front to make it supportless. This build uses about 30g of filament with only 2 walls.
Petit canon de 105mm pour mon u-boot
The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
Electric motor fan, ventilator 12x105mm
M7 Priest 105 mm howitzer motor carriage. Made from photos, this represents an early version. Any attempt at scale is simply a guess, but the vehicle is approximately 1/60 scale. The gun turns with a small carriage generally representing…
A client wanted a Round for the top of their 105mm shell. I found one that someone else designed but it wasn't what I wanted. So I made this one. I wanted to add more detail but it was a becoming an obsession so… I did a color change for…
This is a reasonably scale wheel for a 1/8 scale Mig-3 warbird. This has a 4mm hole for 1/8" or 3.5mm shaft. Print the tire out of TPE or TPU, use whatever wall thickness and infill produces the desired softness/firmness. I used 3 shells,…
Post printing: glue in some nuts in the recesses, and thread bolts through. I added a dab of hot glue to the ends of the bolts to keep the scope safe. Cut the filter to fit in the ring, past the lip, with NO GAPS. Wrinkles are fine, and…
Use matte black filament.
This is a lens hood for the Canon FD 35-105mm 1:3.5 lens. Attach it by twisting it on clockwise, and it locks in place. Like the inspiration model, this hood may also be reversed for easy storage. The f3d file is included for easy…
Made the original model with a project in mind that ended up not happening. Decided to make more sizes since it was easy enough to do. I have printed the 40mm sphere and it printed nicely. Basically made spheres in tinkercad going up in 5…
Hi, to download Filter Sock Holder 105mm Glas Mount for 5mm, 6mm, 8mm, 10mm glass, I use nylon 105mm x 380mm and recommend this seller has a variety of mesh thicknesses: http://s.click.aliexpress.com/e/bOI7eRyk Filter Sock Holder is my…
The height of the self is currently 50mm. If needed. Just extrude the pillars (the shoes for self). The pillars should be ideally made from Flex filament
It is designed to fit on the Meepo truck. The wheels are the Meepo Donuts with a diameter of 105mm. If you find the model useful consider buying me a coffee. Paypal/Cashapp: @Statonwest Eth: 0x2Fa4aeBdBD612508a3077Ecd323bbb89d85412Ba
stackable holder for coasters. inner diameter: ⌀105mm 35mm high, 30mm if stacked
Canon EOS R5 mark ii / 25-105mm F4 L IS USM Gridfinity 4x5
3d Printable Replacement 105mm Rifle for HGAC Gundams The 105mm Rifle A physical projectile weapon and one of the main armaments for the MS. [1] It is often used with both arms and is very accurate. [1] A radar is attached over the muzzle…
Vykrajovátko s motivem slepičky - výška cca 105mm.
Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.
I printed it with supports just on the inside placed on the flange.
Slide on offset step-up ring to 58mm thread for Mamiya TLR (C330, C220). Tested on 80mm f/2.8 and 105mm f/3.5 lenses. There is no thread designed for 58mm side, but print surface provides enough friction for a snug fit. Print is done in 2…
I have a Bestway Pro Steel MAX 4,27 meter round pool, none of the published base plates worked because of the bore distance. Too wide or too small. This is now 105mm in distance. Works fine for me.
My hollow spheres are popular so I decided to work on other shapes as well. Basically made half cylinders in tinkercad going up in 5 mm increments then cut a hole inside with a half cylinder that was 5 mm smaller and centered inside. The…
Really needed a place to hang my filter socks while I change them out or let them drip before taking them to clean. I trimmed it up a bit to be more size friendly to my build plate. Mounted with double sided tape.
My Dryer vent would not seal due to a warped flap. This is printed in PLA with 40% infill and 4 external layers. Some light sanding is needed on the pivoting portions of the flap to round the layer lines so that the flap swings freely.
This adapts the popular 4.58in or 100mm solar filters to the SVBONY Maksutov-Cassegrain of the 105mm size. I printed this from ASA with some shrinkage in mind so if you print with PLA or PETG might want to shrink it by 0.5% There is a…
Big Spool Holder to build you will need 4 12x18x4 bearings and m3x30 screw or longer
The adapter is printed with PETG and do not need supports. To assemble the adapter, use 2 cylinder screws M5x25 and 2 hexagon nuts M5.
This model is a wheel chock designed for 105mm Cloudwheels on an electric skateboard so you can transport it face up without it rolling around. I designed this from scratch but based it off of jczab's design as I liked his idea better…
Schachtel mit Deckel. Abmessungen Innen: Länge 165mm, Breite 105mm, Höhen von 30mm bis 160mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Internal dimensions: length 165mm, width 105mm, heights from 30mm to…
This is a practical remix of the cactus-shaped vase. I have added an internal cutout specifically designed to fit a standard 10.5cm nursery pot. Key features: Perfect Fit: The internal dimensions are 105mm (diameter) and 85mm (height). No…
This is a solid oval base 170mm x 105mm and 4mm thick. It has an integrated wound counter which takes 12mm dice. It's a really simple mash up between two models. I'm really sorry but I can't find the original base model like so if anyone…
I printed them from PLA+, but you can print them from PETG Print 2 pieces to get a set, there is no need to mirror them. Make sure you print the outer walls first, because of the tight tolerances. Please don't reupload it to other sites,…
Its a lens holder designed to show of the lense butifly.
72mm screw-on lens cap for Canon FD 35-105mm f3.5. It might also fit other lenses with 72mm filter thread but I don't have any to test on. Print at 0.1mm layer height for detail.
Remixe of the DJ105 Top Frame: stiffer but heavier design. Category: R/C Vehicles
This is a kit to convert your FD 35-105mm f3.5 to an EF mount lens. The aperture is controllable and it uses no additional hardware, only screws from the original parts of the lens. PRINT AT 0.1MM LAYER HEIGHT WITH NO SUPPORTS - the…
A nozzle to direct a fans flow laminar. It seems onto the fan with M4 nuts and bolts. NOTE: Also designed for printing upside down: One side has a few overhangs, the other one needs support. Choose whatever your printer can do better.…
This model is a display stand for the 105mm round used in the United States Air Force’s AC130 Gunship. The file includes two pieces for displaying your 105mm round horizontal. Perfect for making plaques or displaying in a bar. Print…
This is an extended Gen1 chassis to make custom hardbodies fit xmods chassis. Use the body jig (sized to a standard chassis not the extended) and body clips to make the new body meet the old chassis. You can find the rear clip and many…
Wrench for 105mm polarizing filter. Category: Other
Insert for flower pot diameter 105mm height 15 mm to prevent plants to stay in water.
One Version for my OBR and one wihtout the skull. I printed it with PETG 100%. I wanted it a littele bit heavy.
I designed a lens hood and rear lens cap for my Nikon 105mm f/2.8 D Macro lens. The hood has 52mm threads on the inside as well as the outside so you can attach the front cap without removing the hood. The rear lens cap also has 52mm…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made pyramids in tinkercad going up in 5 mm increments then cut a hole inside with a pyramid that was 5 mm smaller and centered inside. The size of the…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made hemispheres in tinkercad going up in 5 mm increments then cut a hole inside with a hemisphere that was 5 mm smaller and centered inside. The size…
A container made for my Girlfriend to store her cloth swaps. 100 X 100 X 95mm
This crimper had no box and i don't wanted to run after it. That why i did this box which is fixed on the Assortment box (zbs. aliexpress). it is done for 205x105mm assortement box.
For some given gouache painting. As I value them I designed this simple frame. It used 8 magnets. Parametric: width and height of both solid are linked by constraints in the first sketch by formula. The original model is tuned for a…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made cones in tinkercad going up in 5 mm increments then cut a hole inside with a cone that was 5 mm smaller and centered inside. The size of the model…
One Version for my OBR and one wihtout the skull. I printed it with PETG 100%. I wanted it a littele bit heavy.
Made the mounting holes 1mm close together to match 120mm fan spec
Design changes performed using JSCAD
Original style lens hood for the Canon FD 35-105mm f3.5. Like the original one, it can be mounted backwards for storage. It helps to significantly reduce glare and protects the front glass from being hit easily. It might also work on…
A lens cap for the Mamiya Sekor 105mm TLR lens done in the style of the original lens cap. Printed on a textured bed with fuzzy skin on the outside walls. Some supports may be needed for the text on the cap.
This is a Gridfinity 2x4 storage tile for a Sigma 105mm 1:2.8 DG Macro lens.
not really much to say here … its a lense cap with a slight angle for account for print inaccuracy and temperature changes; that's basically it. sorry for the crappy print quality, didnt calibrate that filament like at all :{ some stats:…
The gun moves up and down and rotates approximately with the same range as the real gun. All holes and inserts must be filed clear of any flash/brim/support material. Most parts are friction fit, but some need to be glued. Assemble using…
This model is a display stand for the 105mm round used in the United States Air Force’s AC130 Gunship. The file includes two pieces for displaying your 105mm round horizontal. Perfect for making plaques or displaying in a bar. Print…
This is a practical remix of the cactus-shaped vase. I have added an internal cutout specifically designed to fit a standard 10.5cm nursery pot. Key features: Perfect Fit: The internal dimensions are 105mm (diameter) and 85mm (height). No…
Bayonet style lens hood for Pentax 6x7 90mm or 105mm lenses. Should work with longer Pentax lenses with 67mm diameter filter size. With 100% scale it may be a bit too tight. I printed it 99.77% scaling and it worked out great.
My hollow spheres are popular so I decided to work on other shapes as well. Basically made pyramids in tinkercad going up in 5 mm increments then cut a hole inside with a pyramid that was 5 mm smaller and centered inside. The size of the…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made cones in tinkercad going up in 5 mm increments then cut a hole inside with a cone that was 5 mm smaller and centered inside. The size of the model…
My hollow spheres are popular so I decided to work on other shapes as well. Basically made half cylinders in tinkercad going up in 5 mm increments then cut a hole inside with a half cylinder that was 5 mm smaller and centered inside. The…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…
Ventilation Grille - Duct Cover - Griglia ventilazione a bocca di lupo Dimensional measures: 105x105mm 105x210mm 210x210mm 210x105mm Ø105mm Resize to adjust dimension All our designs are free to download and use. Your support fuels our…