Držák mobilní pergoly CA1186 (Rhino Rack)
Držák mobilní pergoly pro venkovní použití, pergola zn. Rhino Rack
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
- Downloads
- 57
- Likes
- 6
- Rating
- 0
163 models
Držák mobilní pergoly pro venkovní použití, pergola zn. Rhino Rack
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
The door handle trim on my BMW E28 broke so I created this 3D printed replacement. I know this part is still available and cheap but I wanted to practice my 3D modeling and printing skills. This is a replacement for BMW part number…
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
Print approx. €1.62–€1.97 excl. taxPreliminary estimate for one variant
original creator of model found here: https://www.thingiverse.com/thing:1179160/files this is just an engraved version
🇲🇾 Selamat datang ke Malaysia! Welcome to Kuala Lumpur! This model was created by Ivan Khrishadi . Merdeka 118 , previously known as Menara Warisan Merdeka, KL 118 or PNB 118, is a 118-story megatall skyscraper in Kuala Lumpur, Malaysia .…
Attachment for a sharpener with an abrasive wheel for sharpening drills, angle at the top 118°. The attachment is suitable for a drill with a diameter of up to 10 mm, an angle of 118° can be used for most types of drills. The attachment…
This model is compatible with the lego system.
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** After a few years of great service, the latch on my…
Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG, Perimeter=5 Gedruckt wurde auf der Vorderseite, mit der Schrift “118°” nach unten (siehe Bild). Keine Stützen notwendig. Es können bis zu 3 Magnete der Maße 20 x 6 x 1,5 mm…
No supports are needed!!! This is the official periodic table of ELEMENTS! All the elements, Hydrogen to Oganesson, all 118, are on the stl. file. This is a great present for a science teacher or someone who loves science! (It was mostly…
This model is compatible with the lego system.
This model is compatible with the lego system.
A replacement battery cover for Denon RC-1192 remote. Printed in PLA, but I think that PETg or ABS will be good too. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 100% Filament: Any PLA
So this remix on Thingiverse is actually from a design on Myminifactory. https://www.myminifactory.com/object/3d-print-blink-fox-dice-tower-108734 The design on Myminifactory credits Jukka Seppänen's Blink Fox. But I don't care about…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a remix to accommodate the larger size bottle (4 fl oz, 118 ml). Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: Eryone PETG White Category: Household
This model is compatible with the lego system.
this is an upload of a 1/35 scale gas cylinder i am selling on my ebay store in different scales and sizes Category: Model Furniture
The Cap is the same as the original. However, the Plug didn't fit and I couldn't find one that did. So I made the plug and made it look similar to the cap. I think these oil pans are all a bit different and it is hard to find parts that…
Best printed standing with high infill. I prefer stronger filaments such as abs or pc. The support is only needed in the part where there is a latch. In the hole for the screw remove the ready support that is in the model, it is easy to…
This model is compatible with the lego system.
Just a quick remix to mount my DCB118 on my skadis charger board
This is the replica model of iconic boat WALLY power 118. Hope you like it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2~0.15 Infill: %10~%15 Filament: NA NA NA Notes: Be…
Modeled to replace the standard fans FAN-0118L4 with Noctua NF-A8 PWM fans in a 2U Supermicro Server SCE829. As stated by Supermicro the FAN-0118L4 is a standard fan for CSE-218UTS, CSE-219UTS, CSE-828TS, CSE-829, CSE-835XTS, and…
This is a slight remix of the sugar scoop. I made it larger so that it would be ~ 1/2 a cup (118 ml)
This model is compatible with the lego system.
Esalta la passione per il mondo BMW con questa esclusiva silhouette della BMW F20 118d/116i. Realizzata con precisione, la sagoma cattura le linee dinamiche e sportive della vettura, poggiando su una solida base che integra una targhetta…
This model is compatible with the lego system.
60 mm square “refrigerator” magnets of the elements, designed to be used with two 6mm X 2mm magnets, though magnetic tape strips, double stick tape, and removable adhesive strips will work well enough. Works best if printed in two colors.…
I was annoyed when the original model was only slightly too wide to fit on my Voron V0.2. So I made a simple edit using MS 3D Builder. For anyone else in the same boat
This model is compatible with the lego system.
This model is compatible with the lego system.
All 118 elements with their atomic number and chemical symbols.
811807577C Audi wheel housing liner insert
The water bottle doesn't fit into a normal car cup holder so I made this.
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
A 1x3 Gridfinity cube to hold 3 x Liquitex Basics Acrylic 118ml paint tubes. The hole is ø 38.5mm wide and should fit other paint tubes with a +/-38mm diameter. Tested with: Liquitex Basics Acrylic 118 ml Reeves Acrylic Acrilico 75ml Let…
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
A durable plastic fastener designed to securely lock the hood prop rod in place. Resistant to engine vibrations and high temperature changes.
This is a Nerf blaster display stand for the Zinc Pistol (a blaster made by 118 Design). There are two versions. One has the bottom “shoe” of the stand facing forward, and the other has it facing backwards. Choose the version that will…
3 models in 1 choose the one you prefer
Design inspired by similar wall mount for Makita . Consists of two equal elements. Printed on side with no supports. I used 3 walls and 20% infill. Once you put both sides mark and predrill bottom via bottom holes while charger is on,…
Wall mount holder for any 1-bay NAS.
This is a remix of a part from a Thingiverse model (https://www.thingiverse.com/thing:4711177 by blaskkaffe ) , that I customized to better fit my camera (Kodak No3 folding camera). Slightly increased widths on the slots, improved the fit…
[Universal V dipole Antenna Hub] for m4 whip and BNC coax this is a simple, but extremely practical antenna system that is multiband capable. it enables you to adjust it to practically any frequency within its physical limit. should be…
The Bosch RA1181 router table does not come with a miter gauge so this solves that problem. This design includes 2 sliders: one with a detent for 15 degree increments, and one with out a detent to allow for any angle to be set. The main…
My OEM fences would swell up from the year-round humidity, so instead of buying replacements, I designed these. Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.15 Infill: Any Filament: Any Any Any…
I bought my E46 without this tube and was reluctant to pay $47.79 for it on FCP Euro. Ended up costing a lot more than $47.79 in time to model and it still isn't perfect. That said, it does fit and is much better than nothing (see…
This model is compatible with the lego system.
You can buy these for about £6 in metal, but if you'll like to print one then try this! Costs about 5p :o) The graticule scale isn't terribly important because all that matters is that the tip point is at the same distance from both sides…
Triangle Printed from PETG Raft layers: 2 Overhang treshold: 0 Custom supports to easy clean the parts Perimeters: 5 Top layers: 8 Bottom Layers: 6 Sealing for triangle Printed from Fiberlogy MattFlex 40D Prusa Slicer Standards If you…
Just a simple 118 Degree gauge. to check your sharpening angle. modeled after the commertialy avialable metal ones.
Holds your Magicshine MJ-6118 battery in a standard MTB bottle cage location! The design has small detents to help hold the battery in place but still lets it slide out easily for charging. Optionally includes a cable routing channel if…
Widened the original model and moved the screw pegs to suit DeWalt DCB118-XE charger
I mounted the Bosch RA1181 router table on my table saw and mounted a Triton router to it. I wanted a simple place to put the accessories (extra router plate inserts, spanner, lift arm, extra collet) and cord management so that they're…
I built the Whadda/Vellemann bat detector kit (it's sold under different names, for example this one:…
I resized the original model so that it fits my KAIWEETS HT118A multimeter, and also added a section to hold a 2nd set of probes with alligator clips. Thanks to blackjack220 for the original model. I printed it in SunLu Grass Green PLA+,…
3 files have been included. ***** Make certain the jig is set at or above the center line of the grinder wheel.*****
An assortment of connectors designed to fit the Molex 0.093" 1190 and 1189 series. Data sheets for each are provided by Molex here: 1189 (Female): https://www.molex.com/pdm_docs/sd/002092101_sd.pdf 1190 (Male):…
Table holder for Denon remote RC-1181 Print Settings Printer: Anycubic i3 Mega Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20% Category: Audio
Gridfinity Bin for the Kaiweets Multi meter - Model No HT118A or HT118E Storage for the leads under the meter when not in use Cutout for the leads Stoppers for the stand when the meter needs to placed at an angle Slots to rest the probes…
3.5" drive bay bracket for HX-118 IDE to CF adapter
I've made spare eyeglass tips for the Nike 7118. The part have been made symmetrical, you will lose the “desing” element but you will be able to print flat letf and right at the same time. Printed in TPU.
NorCold 2118SST refrigerator Drawer Slider/Hinge replacement I designed this as a replacement using the original as a model. Norcold Filed for bankruptcy and liquidated assests. Certain of Norcold’s assets were acquired by Dave Carter &…
Pocket sized mono amp with TPA3118 board and usb c pd input. Parts: 3 M3x6mm 4 M3x10mm 1 M4x5mm TPA3118 board ZY12PDN Stereo Jack (Like this: https://www.amazon.com/Ancable-5-Pack-3-5mm-Stereo-Headphones/dp/B07JNC4P7Y/) resistors for…
Designed for the following Hama 00118099 easel design TV stand: https://uk.hama.com/00118099/hama-easel-design-tv-stand-191-cm-75-black https://www.amazon.de/gp/product/B07XYC6YWQ Certainly usable or customizable for other stands. I…
Chassis kit to fix the shortcomings of the long flat skid on the FX118. This has a 10-degree skid and shortened the frame's bottom rail (battery relocated to slider). I ended up with an ESC above the transmission and the rx on the slider…
Here's a drillbit sharpener I've made long ago. I got my inspiration from "mgx" who built a drillbit sharpener for a dremel. So here is one for the Proxxon IBS/E. You'll also need: 1x screw M3 x 30 mm (hexagonal will fitt well, for fast…
A TPA3118 amplifier board case including all electronics needed to use it on AC with an 3,5mm auxiliary connection and bookshelf speakers. I have used the following parts to build this project; 8x M3x10mm Screws 2x 24V TPA3118 Mono…
A holder for the popular TPA 3118 module. You have to use M3 brass inserts and computer drive screws to secure it.
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. These storage/measurement tubes are designed for reusing the caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with…
Important notice I will make some change in the model to reduce the gap of the bottom row but the model is totally usable. This model isn't related to the fantastic project named also ASK55 by Paradigm. If you want a end-game keyboard,…
Replacement cap for superlube PTFE oil
ARTE&DISIGN GT118 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
I needed to replace a wheel on my compact dishwasher Electrolux ESF 2300. The original part number was made in PP, and had several revisioned part numbers: #1551183104, #1551183005 and #1551183013 Print with thick walls, high infill (I…
This lid was printed to replace an original that had met an untimely death. Fits the 4 oz./118 ml. container snugly (although not water tight). Printed in TPU for flexibility. Container included in photos for reference only.
The first thing that was broken was the wheel holder. At least the Caliper worked without the wheel.
Hi there, This is a Apple Standard Keypad case who use a cutted ASK plate (M0116 and M0118) This project is related to the ASK60 keyboard case : https://www.thingiverse.com/thing:4013453 Parts that you need ASK : Alps Switchs, keycaps,…
Added pegs to the original holder so that it can be mounted to an Ikea Skadis board.
118ml Epoxy glue bottle station (suitable for ≤42.50mm dia. bottles). Features Cardboard mixing sheets slot. Stirring sticks holder. Slots to allow viewing remaining glue in the bottles. Can be turned around so mixing sheets slot is on…
A simple STEP file of a Magicshine MJ-6118 battery pack. I'll tell you right now that it's not millimeter-perfect, but it was good enough to make a battery mount for my bike (with a 0.25mm offset).
print 1-2 words at once depending on size of buildplate. 20% infill is enough at 2mm height.
CZ: Šablona obsahuje 5 otvorů pro označení míst, kde je nutno vrtat (4x díra 4,3 mm a 1x díra 44 mm). EN: The template contains 5 holes for marking where to drill (4x holes 4.3 mm and 1x hole 44 mm).
Just a longer version of neuroshima hex token box, now able to house both the hexagonal tokens in the big compartment and round ones in the small compartment.
Replacement pole hinge pin for a Rhino Rack Batwing/Foxwing awning. The OEM version of this is made of PA6 but I have printed these in ASA and PETG successfully. Use 5 Wall loops and 25% infill. To get a strong part there is a…
This is just a simple ring if you, like me, want to replace the standard color ring of Wera 118 screwdrives with fancy colored ones. I e.g. used the same color coding of my wera L-keys. The step file is also in the attachments, if you…
replacement support for genius kb-118 keyboard, can also work for similar keyboard náhradní podpěra pro klávesnici genius kb-118, může fungovat i pro podobnou klávesnici PETG/PLA
Hallo, Ich habe für diesen Leuchturm ein neues Dach gemacht, damit es zu dem Leuchtfeuer passt was ich verwendet habe. hier der Link zu dem Leuchtfeuer…
Pièce LEGO TECHNIC 6311889 WING 1X6X1 2/3, W/ 4.85 HOLE
Prevents breaking the lens in a crash when using for FPV Customized version of http://www.thingiverse.com/thing:65894 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=65894 Print instructions Category:…
I found myself losing this small wallet too often. It was time to put an Airtag on it! I wanted the elastic strap to cover the Airtag so that if someone were to take the wallet, they might not see the tracker and remove it. I used 3M…
Le fichier source provient d'Open Forest Data => https://dataverse.openforestdata.pl/dataset.xhtml?persistentId=doi:10.48370/OFD/DCZPUO mais contient des erreurs. J'ai donc corrigé le modèle pour le rendre imprimable en 3D. Identifiant…
Print with no support. Add small rubber knob under for stability.
On my Bosch RA1181 router table, the inset rings (red hole caps) are not flush with the table top. They are low by about 0.4mm. So a created a ring shim that installs nicely on the back of the insert rings. I made it 0.4mm thick but you…
I used measurements from a damaged OEM part to create this printable version. I iterated through a few printed versions until I got one that worked well enough for my purposes. It's a bit finicky in that you can crack the screw posts if…