189 models
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Print approx. €2.71–€3.32 excl. taxPreliminary estimate for one variant
A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. Tested in PETG 0.15 layer height…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
A stackable, interlocking modular holder for vials and test tubes in accordance with ISO-4142-2002 standard. A single module dimensions are 90x90x50mm. One module has the following openings: 2 x 25mm (for tubes of diameter ⌀24mm) 6 x…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly BMW 2002 Turbo. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended if…
This finely detailed bust captures the iconic look of Spider-Man from the cult movie era of the early 2000s. The model stands out for its fidelity to the original source material, from the characteristic raised lenses to the precise…
This model is compatible with the lego system.
I really do not know who designed this or rather scanned this, but i believe this must be on this site. I don't think Thingiverse has much time left. This is a 1 to 1 replica of the original, it just snaps in place really well. (Altough…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Original document holder must be modified. Use double side tape (or glue) and 4 screw for each side. Print twice (one mirrored) It is for 7 inch 1din radio. Might be used for 2 din (I didn't try it)
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
Update 17-Apr-2024: For Dremel model 3000 I added a separte post, see NOTE below! When working on difficile parts with a Dremel grinder it is good idea to guide the part by hand rather than the machine. Although the Dremel is model 315…
Ersatz Gummipuffer Heckklappe am Megane 2 Coupe Cabriolet. Da dieses seid Jahren schon nicht mehr bei Renault verfügbar ist, habe ich selber einen Designend. Die Montage ist etwas unentspannt, da die Aufnahme sehr eng ist. Mit etwas…
Welcome to The Low Poly Auto Show! This is a low-poly BMW 2002 Turbo. Designed to be printed without supports at 0.1/0.2 mm layer height if you have a solid machine with plenty of cooling. I recommend you print this at full size,…
BMW 2002 Silhouette wall art
This is a vintage iconic model dating ca 1970. The print from the cover picture was made with blue silk PLA. The other make was made with neon green translucent PLA and variable height + adaptive cubic infill (hence the stripes)… I'm…
I created this part because my cup holder separator failed on my 2003 Camry, mainly because of a small piece of plastic breaking out of the mounting hole that the tabs for the separator slip into. This part has longer pivot tabs than the…
Attach 6.5 and 6.75 speakers to a 6x9 factory Toyota/Lexus mount. Category: Automotive
I designed this to wall-mount my Ikea STYRBAR remote for the TRADFRI living room lights and make it sort of match the other light switches and outlets. To mount on the wall, mark out and install two or four diagonal screws at 94mm spacing…
Ball joint split into two parts, hold together with screws. Like this the ball can easily be inserted to the joint and the grip / friction can be fine tuned. Slides on the original metal part which is glued to the glas and interfaces the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Current logo of the American Football Team Pittsburgh Steelers
Included a copy of the OEM clip that requires supports and a simplified version that can be printed without support. Used 3 perimeters and solid infill Recommend PETG or ASA in order to better tolerate the heat.
A coluna de som do meu carro avariou tive de fazer um adaptador Espero que gostem Se imprimir este objeto, por favor partilhe a sua impressão 3D ----- English version ( translate google )--- The speaker of my car broke down I had to make…
I lost mine and decided to recreate it, I got to the v3 version and it's practically ready even if I'm using glue to glue it properly, the interlocking system is not reproduced very faithfully because I don't have the original piece in my…
Upgrade your Subaru Impreza GD (2002) with this custom Side Marker Air Intake Cover . This 3D printable part replaces the stock side marker and adds an integrated hole to channel cool outside air directly toward your cold air intake.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The X-Files - Special Agent Fox Mulder - 1993-2002
Printed in PETG needs Supports on Outside Use only painted support ! !!no call supports only on Build Plate becouse you get also Support inside!!
This is a set of blocks that can be used to recreate the Ice Planet - Male , Ice Planet - Female (Doctor Kelvin) , and Ice Planet Chief (Commander Cold) figures at 500% scale. These were part of the Ice Planet 2002 subtheme under Classic…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
So this is a RC CAR body version of my BMW 2002 toy-car with a 208 mm wheelbase which is exactly to scale to the original car. I'm also working on a RC chassis which will use this body; when ready the link will be here. If you have…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap. I printed this with PLA on a printer with a 300mm x 300mm bed. I had to rotate the print 45 degrees to get it to fit the bed. I…
modelo escala generado con IA de un ford ka modelo 2002
A model of an East German firetruck knows as the lo its an robur 2002. The model is not 100% accurate but it's close enough. The wheel are not really turning so its just for looks and presenting. To assemble it u need 2 front wheels and 2…
Cupholder Insert for 1999 - 2002 Chevy Silverado. “Pro” tip, print in back filament and coat in plasti-dip. They will require some pressure to insert, but they fit well in mine. If you're sick of your cups trying to fly off into Narnia…
This is a direct replacement for a 2002 WRX sun visor clip. Mine broke at some point and rather than source one and have it shipped I decided to model my own. I printed it way-back-when on an Affinia H480 with "natural" colored ABS and it…
Model of a Piston Aprilia RSV Mille 2002 RP. Tried to print in Silver Silk PLA but still strugglin with orientation
Horror Movies - Dog Soldiers - 2002 3D printable model.
GasGas EC 300 2002 Kennzeichen Halter weg klappbar für sumo/Enduro Abstandhülse am besten aus TPU Rücklicht: https://amzn.eu/d/bGidhtm Rest aus PLA/PETG
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I had an old 2002 Dodge Quad Cab Hot Wheels, and part of it was broken, so the rear axle didn't stay where it was supposed to. I am personally a Chevy guy anyway, not a Dodge fan, so I decided to make a chassis and long box for it, making…
The X-Files - Assistant Director Walter Skinner - 1993-2002
3d models of Green Goblins body armor as seen in the 2002 Spider-Man movie, that i modeled and used for my cosplay.
The X-Files - The Lone Gunmen - 1993-2002
A slick keychain of an Seat Ibiza 6L (2002-2007). Made to print in more colors, 16th and 17th layer if you use 0.2 hight. The seam in the photos is only from the modeling software and is not present in prints. No supports ofc🙃
Nissan Gtr 2002 generated by Ai. looks cool
The X-Files - Special Agent John Doggett - 1993-2002
Simple Keychain of the front of a bugeye WRX for those who love the cars.
The X-Files - Special Agent Monica Reyes - 1993-2002
Introduction The Car Vent Phone Mount is all in the name. Only recently have cars come equipped with Bluetooth and CarPlay, so the CVPM is the perfect, low-cost improvement to your driving experience by making your phone easy to see and…
28 Days Later - Fleeing the Flaming Infected - 2002 3D printable model. Two sign options. You can print and finish one sign by painting, or I've included a blank sign and an image you can print and glue to the sign.
All four turn signals on my 2002 Kawasaki VN1500 Vulcan Classic Fi were in a sorry state - you can see one of them in the photos. I know from previous experience that replacements for these are in the $50 a piece price range. Believe me.…
I made this model to replace the cigarette lighter in my 2003 WRX with the USB port for my Alpine head unit. I can only confirm it fits the USB cable from an Alpine iLX-W650. It is a friction fit but you can use a little hot glue on the…
These are some of the fins (and the little handle nubbin) to replace broken parts in the front air vents of a 2002 Jeep TJ Wrangler. I printed them in Bambu ABS GF which should easily hold up to the heat. The fins all have a flat back…
Stephen King's Rose Red - Annie - 2002 3D printable model.
The X-Files - Alex Krycek - 1993-2002
!!!SCALE THE MODEL!!! Please be very careful when removing the printed parts from the build plate and during assembly, as some parts are delicate and can be damaged if excessive force is applied. For the best print quality, I recommend…
I needed a set of centercaps for some Subaru rims that I just picked up and while I could buy them it was easier / cheaper to print some. I put together a number of different options while I was at it. The original for this rim had a…
Este archivo se creó con la ayuda de AI, pero se modificó para tener un puerto de conexión similar a Lego. Espero que te guste.
Sci Fi Movies - Solaris - 2002 3D printable model.
The X-Files - Mr. X - 1993-2002
This 3D printable Antenna Delete Plug is designed for anyone who wants a cleaner, more minimal look on their car after removing the factory antenna and replace part 86321FE040. The plug fits directly in place of the original antenna base,…
The X-Files - Deepthroat - 1993-2002
Finally, a hardpoint for you to fit your mobile phone into your van or motorhome! You can print it mirrored for either side, maybe fit both! Now you can finally mount your phone in an unobtrusive place using adhesive pads, screws,…
Fits perfect on the 2002 Jeep Wrangler stock CD player. The .scad file has parameters you could adjust for similar push-button, spin-to-select type knobs (as often found on a printer's LCD).
Basic vent mount for a Cobb Accessport that should fit any 2002-2007 WRX. Pictured is my 2006 STI. With a 66° C glass transition temperature, PETG-HF works fine for me with occasional 100° F (~38° C) days. If you live in AZ, you might…
A guide for 5 x 4mm OD tubes spaced 15mm apart. Top and bottom half bolt together. The guide has countersunk holes for screwing (lightly, these are not built for strength) to vertical surfaces if required. The M10 Bolts are relaxed,…
Replacement and longer version of mounts for Signum cable organizer. 80 mm version is close to the original one. Countersunk holes for the mounting are M5 (the original screws fit), while the top hole for the thumb screw is M8×1.25 thread…
An insert for the cup holder in a 2002-2006 Toyota Camry (most models, I think) that facilitates securely holding smaller cups or bottles. The original part seems to wear out and fails to stay in place. They are difficult to find in the…
The X-Files - Monster of the Week - Eugene Tooms - 1993-2002
The whole VAG seat recliner knob, tested and working in a Seat Ibiza 6L but should work on most of the vag group cars of that era (approx.. 2002) Please don't print this before testing the mechanism alone. I've posted the mechanism for…
This is a drop-in replacement cap for the 2nd Generation Honda CR-V
Bugeye Zuma conversion to 6" LED lightbar. Will require a bracket behind it be cut or hammered to fit. Modeled for 6" Nilight LED lightbar from Amazon(link below). Included Blend file for headlight bezel as well as a bracket that fits…
This pad fits the later BMW 2002 models. The steering column design changed a few times during the model run so I do not know if it will fit earlier cars as well. It is not a duplicate of the original pad. The original pad design always…
Holder for the key fob of a 2002 Toyota Sequoia. The key fob ring connector had broken over the years and could no longer be attached to a keychain.
This 2mm thick model can be scaled up or down or affixed to a magnet.
Llavero contruido apartir de una foto. Utilizar 2 colores para un resultado optimo
Silhouette of an Ibiza 6L that was bodykited by MangaTuning Around 170 x 100 x 10 mm Scaleable
My 2007 Honda Jazz front seat sliding lever broke, so I designed a new one to replace it. I printed it in ASA with 5 walls and 40% infill. There are 2 STL versions one with normal and one with tighter fit, start with the normal one and…
Printing Recommendations: Recommended Material: PLA (Recommended) Alternative Materials: PETG, ABS Suggested Infill: 15-20% Layer Height: 0.1mm Support Structures: Recommended for detailed undercarriage Estimated Print Time: 1-4 hours…
The Blaupunkt Frankfurt radio was standard issue on the BMW 2002 during the 70s. Sometimes it came with a factory faceplate and sometimes this was left off depending on options. This 2 piece radio bezel adds a more Mercedes look to the…
Hi everyone, i have just created Insert for Proroctví - Prophecy (2002) + All expansions, because i could not find one, that i would like. So i created mine. I tried to make it functional. The mid tray goes directly on the game plan and…
This is a replacement part for the rear center seat belt cover in a 2002 Subaru WRX. When tested it proved to be a snap fit with no modification. I broke this while fixing my back seat and couldn't find any online through Subaru or…
This tool is intended to allow the KTM 50 clutch shoe to sit square and flat within a vice for milling and drilling operations for KTM 50 clutch tuning. The clutch shoe in question is from the 2002 to 2008 model years. The tool is used in…
Vytvořil jsem v Tincercad a v creality sliceru jsem použil šablonu na PLA..Ve skutečnosti jsem ale použil PETG kde jsem jen zvýšil teploty a snížil rychlosti v procentech na 60%… I created it in Tincercad and in creality slicer I used a…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
[Manually copied from my Thingiverse account since import didn't work for some reason …] When building my router table, I had to modify the dust collection connector on the fixed router base of my AEG MF1400KE router (identical to Rigid…
Nissan Skyline GT R34 v-spec II 1999-2002 Racing
Print with the model oriented vertically, and scale to the desired height in the slicer. Brim or raft may be required in order to prevent movement and detachment during printing. For best results use a printer that supports Pressure…
Cap for the windshield wiper water reservoir for a Toyota Avensis from 2002. Printed it in TPU 98A
UPDATE: This design has a bit of an issue ... the dust collector has to draw in air from around the router bit, but also has to transport away the router motor cooling air, which is blown out at the bottom. So my dust collector was not…
3D-Printed Replacement Windshield Washer Fluid Cap for 1993-2002 Toyota Corolla & Geo/Chevrolet Prizm Keep your vehicle’s washer fluid system secure with this 3D-printed replacement windshield washer fluid cap , designed to fit all…
Small dial/knob for A/C temp setting in 2002 Toyota 4runner
An insert for the cup holder in a 2002-2006 Toyota Camry (most models, I think) that facilitates securely holding smaller cups or bottles. The original part seems to wear out and fails to stay in place. They are difficult to find in the…
1972 and later BMW 2002 models have a ring that the seatbelt shoulder belt loops through. If you pull the seatbelt rapidly it can twist in the loop. This spacer snaps in to take up the side and loop gaps, preventing the twist. Print in…
Added cone to the top of the threaded section to enable printing without need for supports. I have printed this out in TPU and it does fit my own car. There are 2 lengths here. The make shown is of the 95mm version. Make image is a 2007…
