Nvidia Shield TV 2017 / 2019 Pro VESA 100 mount
This mount is meant to to be mounted to a 100x100 VESA mount.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 203
- Likes
- 23
- Rating
- 0
276 models
This mount is meant to to be mounted to a 100x100 VESA mount.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for PETGSource material: PET
This model is designed to print and then assemble with almost no supports (organic recommended). PETG is the ideal material for this, and I found that black JB Weld Plastic Bonder epoxy (in the US) works well for gluing the pieces…
Print approx. €10.23–€12.51 excl. taxPreliminary estimate for PETGSource material: PET
A better fit for your YETI Rambler Colster in a Kia Sorento cup holder. You should print this in ABS or PETG, to handle the higher temperatures it might see in your car.
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
The design by Kodatrololo is an excellent design and I decided that it could use a logo. So I inserted the logo using Microsoft 3D Builder. Print instructions Unassociated tags: nvidia shield stand Category: Household Print Settings…
Will make adjustments per request
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
These canards were designed and oriented with inspiration from other functional designs for sale. The canards were designed to be printed standing up on the narrow end. It's not the easiest print because of this, but I didn't want the…
This model is compatible with the lego system.
This is my easy-to-print organizer for all of my stuff. It fit the cabinet below my armrest perfectly. It can store a pen, some cash/coins and lots of other things you want to have with you and organized in your car. I printed it with a…
This is a remix of https://www.thingiverse.com/thing:2572866, to accomodate Molineasails Keel, and swing rig. This remix is basically only for the midship section and the keel box, to accomodate Molineasails swing rigs and keel-rudder…
Print settings: PETG 20% Gyroid infill What you also need: 4x M4 countersunk screws Glue (Felt or stool protector pads) Print the “Holder” twice and then glue them to the “Wall Mount”. The tabs should fit perfectly into each other. I…
I was tired of using janky third-party charging solutions in my Model 3, so I decided to purchase genuine Apple MagSafe chargers to install. The other solutions I found out there had exposed wiring and only allowed the MagSafe charging…
Experience a unique fusion of high-performance automotive design and custom styling with this 3D printable STL model of the Ford GT 2017 . This custom supercar model is perfect for collectors who appreciate creative automotive…
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
I wasn't able to find any F1 logo from this era that I liked, so I put my own together in TinkerCAD, using a copy of the official logo, so the dimensions are accurate. I borrowed the base from another great F1 logo:…
My wife drives a Subaru Impreza and her passenger sun visor broke one day. Turns out a plastic connector piece broke roughly in half. Unfortunately you can't buy just the one piece that broke, you have to spend $90 to buy a whole new…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Redbull Halterung für einen Skoda Octavia (2017)
The holder clicks into the air-vent, but in such a way that the vent is still fully functional. It should fit all the ball mounted phone holders you can get out there with a diameter of 17 mm.
A simple case for the Samsung Galaxy A3 2017. Some cabled might not fit with the case on so if you plug in your phone with the case on make sure that it is actually charging. Print instructions Must be printed with flexable filament -…
It just slides along the top of an iMac ;) I made mine for the 2017 27" 5k iMac with the “Thin Unibody” design, but it should work with really any 2012-2020 model iMac with the same basic body. All the little print does is sit in front of…
The Surface Pro 2017 Pen does not have a shirt-pocket clip so I designed one with OnShape . More info about the new Surface Pen in the Pen FAQ Notes: I printed in PLA which is not very durable for such a small item unless you anneal in an…
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
Just uploading because why not. It fits the phone pretty ok. no headphone jack access but this is just a secondary device for me so it wasn't necessary. Category: Mobile Phone
The limiters prevent rotation of the servo saver's by more than 31 degrees to the left/right. They should be glued to the Front Lower BOM.
OpenRC F1 - 2017 style wheels that fit Tamiya F104 tires. Package also includes the outer thrust plate that is compatible with the Ball Diff found at ( https://www.thingiverse.com/thing:3085455 ) In the spirit of OpenRC, STEP files are…
A hotwheels model of the tenth generation Honda Civic sedan. Included are the typical cast aluminum wheels. To install the wheels, I recommend drilling holes through the underbody and adding metal axles where you want them. You could…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I love my Model 3 but what annoys me the most is the oem charging pad. It's slow, doesn't work with cases on my iPhone, and it warms up my phone. I modeled this MagSafe version which has been a great solution for a few days. I printed it…
Do not use PLA or the heat from inside your car will distort the shape quickly. Use PETG or something with a higher glass transition temperature. No supports are required, just print standing upright. Originally posted at:…
A simple cover to eliminate the divot from cupholder in rear of 2017 RAM 1500. I created at the request of a friend that travels with a large dog in the back. It prevents the dog from stepping into the hole and potentially harming his…
I built these 2015-2017 Mustang Cup and Accessory Tray Protectors to be inserted in the existing rubber protectors. These can be easily removed, cleaned and reinstalled without having to remove the rubber parts. I printed these on the…
40% Infill 5 Top Layer, 5 Bottom Layer
Designed to work with a 2017 Mazda 3 Clip this into the passenger seat belt buckle to prevent the annoying "no seatbelt" warning beep. Obviously, this is meant to only be used to stop the seat belt warning beep when you have cargo…
Some fusebox lids for the V-Strom 650 2017+. Useful if you want to modify it in some way. The taller lid has extra room inside for an add-a-circuit tap or other modifications. The spare fuse holders are deliberately loose, to enable…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is frame plug for KTM Superduke 1290 R 2017 with airtag holder. I recommend print in TPU.
This is an adapter to enable an owner of a 2017 BRZ/FRS/86 sports car to be able to pressure bleed their brake system from the master cylinder. There are several pressure bleeder bottle kits available, or just use an air compressor with…
This is a replacement hook for the trunk organizer for a 2010 Toyota Camry. It should fit 2009 to 2017 models though? It uses a 25mm x 5mm wood screw (1" x ¼" is fine too) to splay the fingers. I printed it in PLA+ but it would probably…
Based on OEM 78132-68L01 roof rack cover. You can engrave anything on it in the slicer or just use Your favorite printing plate to give it a finish You want. For short use/cold countries: PETG Recommended: ASA (ABS if painted)
Bottom is flat. Case is tested. Best printed slowly in TPU.
Latch for the console in a 2017 Honda Fit to design a replacement. It might work with other years also. Seems like a broken latch is a common problem.
SC77 2017-2020 Honda Fireblade CBR1000RR Mirror Blanking Plates Provided a left and right file. Printed in PLA due to short term usage. If long term consider UV stable filaments like ASA. Setting used. 0.2mm layer height, 10% infill, 4…
i made this model from ai designer a while back ago but ended up never printing it , maybe some of you want to print it an i hope its possible because of the background stuff, feel free to share the model and if you are happy with it i…
Did it happen to you that you grabbed the phone in the wrong direction and missed the buttons under your thumb & fingers? Well, it happened to me regularly. I found no phone case designs that would address this issue that time, so I put…
IT Chapter One - Pennywise Stalking Georgie - 2017 3D printable model.
The Dark Tower - Roland 3D printable model. Super easy to print, adjust size to your needs and go!
U can use X1 tablet Keyboard as USB KBD. Please prepare following materials. -Strong small Magnet*2 -Any USB cable. -Al foil or any conductor. Category: Tablet
Adjusted version of jufy111's cup holder insert for smaller cups, modified for 2019-2025 Honda Passports (and I think 2016-2022 Pilots and 2017-2025 Ridgelines).
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
Got rid of the wording at the bottom of the retraction test and made the base of the test flat When you print a lot of these, I feel it adds unnecessary printing time Category: 3D Printing Tests
!!! DO NOT EVER, EVER, EVER! PRINT CAR PARTS WITH PLA !!! PLA WILL reach glassing temperatures on hot sunny days, no matter WHERE in the car the part goes. PETG, ABS, or other similar higher-temp filament is REQUIRED With that safety…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
I liked the original design very much, but the hook was to small and so the upper side of the holder did not get in contact with the bore of the wall of my Zoe R90 2017. So all the weight of the cable lays on the lip of the wall of the…
Recommended to print standing on it's side longways with a substantial brim.
After COVID-19 hit the world, I started having a small bottle of hand sanitizer in my car. Between the two cup holders there is a small spot that is the perfect for a bottle, but it was slipping around, if I didn't have two cups or…
40mm front dash tweeter bracket for GP/GJ Impreza, XV, Crosstrek (2012-16), to adapt the factory tweeters to a 40mm round aftermarket tweeter. Probably also fits VM Levorg (2014–20) and VA WRX (2015–18) as the Subarus from that era used…
Designed a protective cover for the 2017 Volvo XC60 Key to protect the leather from scratches. I think it suits for other models of this generation too. Quite a tight fit. 19.10.2019: Added a second model with the XC-60 text. Print…
Iconic Movie Villains - IT - Pennywise - 2017
There were a lot of adapters out there for different vehicles and speakers. I never found one that I could use. Mine is for a 2017 300h, but should be the same for the 350. I also cut it down so it would fit on my 254mmx254mm print bed. I…
PRUSA Prusament PLA Azure Blue
I found the BOM with limiters model didn't fit my car - I shrank the arms to fit the dimensions of the original 2017 OpenRC F1 part. The picture from the slicer shows the modified BOM with limiters and the original OpenRC F1 parts…
The door handle on my 2017 Hyundai Ioniq (hybrid) has a button used to lock or unlock the doors. One day I drove home and when i got there the button was gone. It appears this is part of a small electronics board in the handle that has a…
This model is compatible with the lego system.
Description: Keep your Ski-Doo pDrive primary clutch running smoothly with this custom 3D printed grease injector tool. This design allows you to easily lubricate the roller needle bearings using the manufacturer-specified Isoflex NB-52…
OpenRC F1 2017 improved rear axis with metal pin inside. There is a hole inside the model. The print must be paused at height of 5.2mm, then the pin can be inserted and the print can be resumed. The result is a very strong rear axis that…
All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…
This mount just slips up behind the headliner. It allows you to mount a wolfbox rear camera inside the rear window. The short mount is used on either side of the sliding rear window. The long mount can be used anywhere, including over the…
Mercedes Part A 201-727-02-87 This a printable replacement part of the door panel clip for the vapor barrier behind the door panels of various Mercedes models such as the Mercedes W201 (190, 190E) as well as the W124 (E-Class) . Would…
So, we've had only had our 20 crosstrek since february and I've had the dashcam I've been going to install since early march, so thought I should get after it. If you have a subie with Eyesight you know that nothing can go in the field of…
I just wanted to keep things from rolling around in the top of the console. The part that lifts up to get to the bigger space - it would always end up in a jumbled mess that i couldn't find anything. Now everything stays put.
No needed additional V-Slot parts Support for OEM hotend and E3D V6 hotend Use .step to modify and to export for aluminium sheet cut machine. You can use .stl file to test if everything will fit before cuting the aluminum. You need swap…
Black Sails - Max - 2014-2017 3D printable model.
This frame fits a 2017 Mazda 3. It required a M6 x 10mm bolt to fix to the brackets on the roof of the car. You will also need to find a bar to fix to the frame, this was designed with a square or flat bar in mind. Can be used with a…
A friend of mine removed a set of damaged wheel covers from his 2019 Kia Niro, only to find a decent set of painted alloy wheels underneath. They look great, but they are missing a center hub cap, exposing the axle nut or center of hub to…
I bought the Noggle (nogglenation.com) in hopes to keep my kiddo cool in the back seat, but found that it did not fit well with any of the vents in my 2019 Bolt EV. So I took some measurements, drew it up in Fusion 360, and created a loft…
Black Sails - Captain James Flint - 2014-2017 3D printable model.
Application note Gen 4 Impreza/Trek * 2012-2016 Impreza *2013-2017 Crosstrek This mount pushes into the space between the top of the radio and the dash. It sets the phone directly in front of the vents to keep it cool while charging. This…
For the Chev Bolt EV 2017/23, this clip is a smaller resize and I removed two alignment tabs on the orignal design. The resize is 36 mm in the x-axis and 36.5 mm in the y-axis. 8 mm in the z-axis. Printed using Galaxy Black with PETG and…
A replacement part for the sun visor in a 2017 Toyota RAV4. I recommend printing horizontally to maximize strength. The original design was printed with PLA and did not stand the test of time as it warped in summer heat, so I have added a…
There is currently two version for different coin sizes. 24x2.2mm and 25x2.5mm.
Slight edit to the rear edges of the chassis to add clearance for the Tamiya f104 tires, which rub on the stock chassis. This is the rear for the 2017 version chassis.
Black Sails - Eleanor Guthrie - 2014-2017 3D printable model.
Black Sails - Anne Bonny - 2014-2017 3D printable model.
This is a quick approximation of the parcel shelf clip for a smart ForFour car (2017), I did need to file the inside to fit the threads of the rod it fixes onto, but your mileage may vary!
Black Sails - Captain Charles Vane - 2014-2017 3D printable model.
This adapter allows small turn signals to be attached to the light mask of the motorcycle. I have used de turn signals from the following link. But you can also use similar ones.…
Do you own a CR-V 2017-2022? Do you have a large ice scraper like in the pictures? Does it get in your way all the time? Now you can easily store it out of the way and have easy access to it with these quick mounting brackets. The…
Printing height 0.2 mm with nozzle 0.4 mm
Black Sails - Billy Bones - 2014-2017 3D printable model.
Designed with a GoPro style mount with passthrough for lights and indicator mounts Print with at least 60% infill
I couldn't find a holder for my version of Catan, so I made my own. Inspired by this Ticket to Ride Europe pieces holder: https://www.printables.com/model/264548-ticket-to-ride-europe As far as I can find, I think my version of the game…
Cover for shift lock button, fits the hole well but doesn't snap in like OEM, good enough to keep debris out of the hole. Print flat part on the bed, you can sand it and paint with black gloss to blend it in, small and simple enough that…
Black Sails - Long John Silver - 2014-2017 3D printable model.
This is replacement part for the Robotgeek Gripper to allow for easier collection of pennies for the 2017 division C Science Olympiad event, Robot Arm. It should be fully rules complaint but check dimensions before using this design. The…
Wall mount for Samsung One Connect box (BN91-18726N). When printing ! Need support inside all the way round.
The Hub Bub Odd is a very simple Wind Power wind turbine for the 2017 division C Science Olympiad, based on the original Hub Bub . It should be fully rules complaint but check dimensions before using this design. The Hub Bub Odd is an…
Tesla Model 3s made from 2017-2020 have an issue with the cables running from the main body to the trunk lid. They used solid-core wire which likes to break when its bent/folded repeatedly. Tesla is currently not offering to replace the…