Core One Purge Bin - Clearance for Core One Nozzle Wiper - Remix 20x5x2MM Magnets
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
- Downloads
- 2,377
- Likes
- 475
- Rating
- 4.96
50 models
I remixed my own remix of @nicohirsch purge bin for the Core One to allow space for my remix of @PCR_178847 's nozzle wiper.
I found it difficult to source the same 20x6x2 magnets that Prusa uses in the USA, so I remixed the side storage design to accept these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Required hardware: 29x 20x5x2…
A remix of @nicohirsch purge bin for the Core One, but using 20x5x2MM Magnets!
Remix of Rugged Box to 120x120x54 in Fusion 360 Uses 30mm M3.5 bolts Thicker hinges and supports
¿Buscas una solución de almacenamiento versátil y personalizable? Nuestra caja organizadora modular, diseñada para impresión 3D, te ofrece infinitas posibilidades. Con unas dimensiones de 20x20x5cm, esta caja es ideal para organizar una…
Einfache Box für Ikea Skadis-Regal mit nur einer Aufhängung Simple box for Ikea Skadis shelf with just one hook
Since Europlast flat ventilation system (220x55) offers quite limited range of knees and missing some quite essential (45 degree) ones, I decided to make some custom parts. I added some air guides for quieter operation and extra strenght.…
This model was made as a remix of https://www.thingiverse.com/thing:5352264 I just stretched it and added a arch so that it would not bend. The pegs fit very looselly but once installed they good.
Printed in PETG using same settings as original. The magnets fit tightly and required a small mallet to install.
This is just a quick design I made in PrusaSlicer to adapt 20x5x2 mm magnets I had to slots made for 20x6x2 magnets. This model is designed for these 20x5x2 magnets (actual dimensions closer to 18.9 x 4.6 x 1.8 mm). Actual magnet…
PSU retainer for the original Prusa enclosure with 20x5x2 magnet holes instead of the larger ones that are hard to find
Remixed to accept 20x5x2mm magnets which are easier to find on Amazon US at the time of posting
Remixed model for 5 markers. It uses two 20x5mm circular magnets. I used PLA, 0.2mm layer height, 0.4mm nozzle with gyroid 15% infill, magnets are glued by the CA glue. Tip: Before printing make sure, that your magnets on the whiteboard…
Project box 180x120x50, 60w PSU Designed 2021-04-25 thing:4839494 printables TOC Project box 180x120x50, 60w PSU TOC Summary Description Print Settings Buy me a coffee? Summary Electronics project box 180x120x50, designed for 60w PSU…
Case/holder K1 upgrade for active carbon filter (10mm two layers): Printed material: PLA/ABS/ASA supports required for case only. Filter can be purchase here: https://www.amazon.co.uk/dp/B07K9MN4QZ
Gridfinity dashboard module for 12.6" 1920x515 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005001966967133.html (with touch) Requires interface plates and magnets to connect to a Gridfinity base plate .…
Step into the world of Death Note with this Light Yagami HueForge bookmark ! Printed at 20x5 cm , this multicolor design highlights Light with dramatic fiery contrasts. Filament swaps used: Black PLA – Base Orange PLA – Flames and energy…
Bring the Shinigami to life with this Ryuk HueForge bookmark ! Printed at 20x5 cm , this multi-color print captures Ryuk’s eerie presence in striking contrast. Filament swaps used: Black PLA – Base Purple PLA – Highlighted shadows Light…
This is a 20x52x10 bearing. The bearing use POM balls (Amazon, Aliexpress, ...). Use the chain "solid plastic pom ball" to search on internet. Features Internal diameter : 20mm External diameter : 52mm Width : 10mm Balls : 8 POM ball…
Replaced holes for 20x5x2mm rectangle magnets. There are some remaining spaces so use superglue.
Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel , sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile. Strengthened geometric lines + clean textured finish.…
2.3U 19 inch rack front panel mount for 12.6" 1920x515 ultra-wide touch screen I used this display: https://www.aliexpress.com/item/1005001966967133.html (with touch) Print the two halves of the front panel mount / two clamps on the…
It's a hook. It has a 50x20mm tab for attaching the double sided strips commonly used for hanging pictures. Category: Decor
Our 2023 RAM Promaster has several 20x50mm slots around the sliding door. I made these slot plugs with holes in them to hang light items. I printed them in Fillimentum FillFlex 98A with support on the plate Things I used: Fillimentum…
When mounting my cooker hood I needed small angle that I couldn't buy anywhere. Decided to make different ones and post it here so anyone can print for themselves when needed. The opening in the file is actually 220x54mm because it was…
Remix of the nice LTT Cable Management Clip to allow embedding a 20x5mm Magnet.
Needed a Wedge, And this was the perfect modul to mod to the correct size.
Easy to print. As an addon to my Euro Pallet https://www.printables.com/de/model/380553-euro-pallet-eur-1-epal-110-correct-sizes Normally they are stackable. This one is not. No support needed. No postprocessing. Have fun!
In this version I added a few mm to make sure the stones will fit even if the printer isn't 100% calibrated.
The Prusa enclosure addon for the buffer uses their standard 20x6x2mm magnets, however this size is not readily available like the 20x5x2mm version that you can find all over Amazon. I modified the slots to accommodate two of these…
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
Remixed from Headphone hanger by Sebastian Grans. The inside face has a hole for a 20 mm diameter and 5 mm tall magnet.
I needed specific angled connector pieces for my in-house mechanical ventilation. Since the original parts were made from ABS, I decided to design and print the pieces; I have made a variation of adapter pieces (please visit my account)…
This is a remix of 3D|NESTs BANG-Sign https://www.printables.com/de/model/673848-bang-the-comics-style-sign If you like it please do not forget to give HIM a like, too. Thanks a lot! You can use two 20x5mm round magnets to fit into the…
For artistic purposes only. Source: https://www.algorand.com/about/media-kit Brand Usage: Community Use of Algorand Trademark and Brand Below please find the guidelines for the Algorand community and users of the open network to follow in…
Salvadanaio modello Lego. Realizzati con corpo + fondo, sono 2 pezzi che si incastrano tra loro. Infil dal 5 al 10% come desideri. Strato 0,25 Materiale PLA Puoi anche lasciare i supporti senza di essi.
Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm
This is designed for Colorfabb / Filamentum 750gr spools. They have a 20cm diameter and 5.5cm width. Feel free to ask for a specific size if you like the design. After having tried a few TUSH designs, I found that they are generally a…
I created the lens cap for Baigish 20x50 binoculars because the stock cap was too loose. I printed the model in Ataraxia Art Flexible PLA.
My MK3S was getting an ‘under temp’ error in a cold garage in the winter. Adding a safe dehumidifier helped keep the temp above the error threshold of about 50°F. The dehumidifier is essentially a stick-shaped weak electric heater. These…
No screw required. Single part, using a 20x5x2 (not a 20x6x2) magnet. Magnet size can be changed inside the fusion file if you know how to use it. Sorry in advance, it's a mess.
This is a base or a holder for a 20x5x2.5 whetstone, i didnt print it yet so sorry for the shitty preview
Agriculture, Furniture, Interior design
I would suggest using 3 walls, 4-5 top/bottom solid layers, and ~15% infill. I haven't tested it yet, but I imagine having too much infill would add unnecessary weight to the print, putting more strain on the magnets. It protrudes .5mm…
Overview This is a precision template system designed specifically for the IKEA PAX Add-on End Unit - 20x58x236 cm (7 7/8x22 7/8x92 7/8 ) version . Standard PAX wardrobe add-on units come with pre-drilled holes for shelves, but the…
Ich habe die 8mm Magnete durch 2 20x5x2mm Magnete ersetzt. Magnete müssen eingeklebt werden. Ausschnitt für den Brush wurde zusätzlich vergrößert, damit der Prusa-Brush leichter hinein geht.
This is a remix of the original Core One x6 plate holder by Xtr3m3. The original magnet sockets have been changed to fit 20x10x2mm (larger surface area) and 20x5x2mm magnets.
This is a base or a holder for a 20x5x2.5 whetstone, i didnt print it yet so sorry for the shitty preview
Step into the world of Death Note with this Light Yagami HueForge bookmark ! Printed at 20x5 cm , this multicolor design highlights Light with dramatic fiery contrasts. Filament swaps used: Black PLA – Base Orange PLA – Flames and energy…