Search results: 2240

Sort order

Counting matching models…

P
PrintablesJ

BTT SB2209/2240 XT30(2+2) Replacement Shell

I'm running multiple tools and found that the BTT provided cables were unshielded and interfering with each other when rubbing against one another, causing bus communications to freak out. I made new cabling with some LDO FEP cable, but…

Downloads
240
Likes
57
Rating
5
P
PrintablesCustomCreations

Voron CW2 Stealthburner EBB SB2240 PG7 Umbilical Mount

This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy

Downloads
2,633
Likes
298
Rating
4.94
P
PrintablesDET-Man

Cable Bridge PLUS for SB2209 / SB2240

Installing a 🥰 BTT SB2209 on my Voron Stealthburner/CW2, I wasn't satisfied with the available umbilical solutions. So I started from scratch, explored different approaches, and designed this Cable Bridge PLUS. It ended up not that…

Downloads
2,629
Likes
33
Rating
0
P
PrintablesDET-Man

XT30 2+2 Plug for SB2209 / SB2240

A purpose build XT30 2+2 plug designed for the 🥰 BTT SB2209 / SB2240 toolhead boards. Built with a minimal footprint to keep your cable routing clean and uncluttered. Companion Model: Use the Cable Bridge PLUS to form a sleek and ultra…

Downloads
2,274
Likes
35
Rating
0
P
Printablesgareth.ky

Stealthburner / LGX Lite / EBB 2209 & 2240 - Remix

The original models of the EBB boards seem to be inaccurate to the as-delivered boards. This results in an incorrect assembly and bad parts. I've tweaked the EBB models based on measurements and sample prints so that it assembles without…

Downloads
1,159
Likes
134
Rating
4.5
P
PrintablesNyxCode

PG7 / CNLINKO LP-12 mount for SB2209 / SB2240

Version 2 This variation includes slots for zipties. This is particularly usefull If you are also routing the extruder cables through the umbilical instead of using the driver on your SB2209/SB2240. Replaces the Stealthburner cable anchor…

Downloads
1,152
Likes
96
Rating
5
P
PrintablesNortonTech

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS

V1.1 - UPDATE: As @Hornet331_645553 noticed and mentioned, there was a slight misalignment with the lower sensor. I have implemented a fix for it as well as added slightly more clearance for the upper D2F switch, hopefully making it…

Downloads
832
Likes
106
Rating
5
P
Printablesjeronbernal

BigTreeTech SB2209 SB2240 PCB Fan

Remixed together Alexander's and BTT's Cable door for the voron stealthburner to work with the SB2209 / SB2240 If you want to use a controlled 3rd fan to cool your EBB SB2209/2240 use HyperToxic's guide to add that 3rd fan, pinout on the…

Downloads
830
Likes
118
Rating
5
P
PrintablesTowapa

SB2209 / SB2240 mount for PUG - New Plug

Remixed version of @MikeF PUG Mount for BTT 2209/2240 - now it fits the bulkier and longer plug that BTT ships with newer boards.

Downloads
785
Likes
84
Rating
4.83
P
Printables3DXman

Voron - BTT SB2240/SB2209 CAN Bus with PG7 Cable Gland Mount

A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…

Downloads
665
Likes
104
Rating
4.5
P
PrintablesMike F

SB2209 / SB2240 mount for PUG

Note: This is for the original CAN cable that BTT shipped, with a small rectangular plug. They've started shipping a different cable with a different plug shape, which this STL is not compatible with. The existing PUG mount doesn't work…

Downloads
627
Likes
81
Rating
5
P
PrintablesSven Kah

Voron Stealthburner EBB SB2209/2240 fan cover

This is for the original version of the CW2 main body, won't fit BTTs variant.

Downloads
624
Likes
65
Rating
5
P
PrintablesArnoldstrife

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief with Spring Steel Cable Guide/support.

Printed with standard Voron settings the cable tie is also needed to secure the cable to the mount.

Downloads
620
Likes
62
Rating
5
P
PrintablesLittle

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Downloads
585
Likes
80
Rating
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 Cable and Connector Strain Relief

Remix to add support for the connector as well.

Downloads
538
Likes
57
Rating
5
P
Printablesquietmesh

Silencer for Crosman 2240

This made an incredible difference on my 2240. Now you can hear the hammer when firing. I haven't noticed any negatives on accuracy and the FPS is unaffected. If it does not fit snuggly enough, use glue ;) Make sure you get clean…

Downloads
499
Likes
38
Rating
0
P
Printablesjeronbernal

Galileo 2 3007 SB2209 / SB2240 / SB2040 CAN Bus PCB Fan

A remix of JaredC's Galileo 2 Cable Door and Alexander's SB2040 CW2 fan cover door I use HyperToxic's wiring schematic to have my CAN PCB Fan turn on when the extruder is used, Info is in his github…

Downloads
467
Likes
79
Rating
5
P
PrintablesMJ JOO

Galileo 2 2507 Fan Cover for SB2209/SB2240

Maintain a unique style of Stealthburner. No screws reguired.

Downloads
467
Likes
58
Rating
5
P
Printablesseage

StealthBurner - KNOMI - CAN (SB2209/2240) - CPAP - NOZZLE CAM

This model has the followinnf features: CPAP mount (2 heat inserts on StealthBurner + CPAP connector) Nozzle Cam support with PCB mount on the right side of StealthBurner face + special cut to handle nozzle cam FPC BTT KNOMI BTT CanBus…

Downloads
433
Likes
67
Rating
5
P
PrintablesBlueGooGluey

Stronger Hex Ventilated SB2209 SB2240 Door with 3007 Fan

Add 3007 fan and ventilation for your can board. I found other hex-holed remixes weak at the door edges and the holes messy to print on my non-voron printer in ABS. This is remixed to retain some strength instead of going super mesh holed.

Downloads
398
Likes
50
Rating
5
P
PrintablesAfteraffekt

Galileo 2 EBB SB2209/2240 30MM Fan Mount Cable Cover

Modified cable cover to hold a 3010 or 3007 Fan. One with a grill, one without.

Downloads
375
Likes
45
Rating
5
P
PrintablesTrogdor

BTT EBB SB2209/2240 Voron Vented Door

I saw my EBB toolhead driver was getting up around 90C! So something had to be done ASAP! I took BTT's EBB door and put the classic Hexagon “Bestagon” on it to make vents. One is just vents the other has mounts for heatset inserts and…

Downloads
369
Likes
45
Rating
5
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 ECAS

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github.

Downloads
361
Likes
33
Rating
5
P
Printablesquietmesh

Crosman 2240 Picatinny X3

This is the same as this, but with two added rails; https://www.printables.com/model/326303-crosman-2240-picatinny-for-bipod-or-laser CAD file included

Downloads
354
Likes
27
Rating
0
P
PrintablesOverLord6920

Knomi Cpap Stealthburner sb2240-2209 No Camera

Found the 3m0 nozzle camera cpap. i didnt need the camera part. also modified tube to be centered removed hex.

Downloads
333
Likes
52
Rating
4.75
P
PrintablesJediOne

Stealthburner + KNOMI+ Rapido UHF + LGX Lite + SB2209/SB2240 + 3DO NOZZLE CAM

Front face for Stealthburner incorporating the following: BTT KNOMI Rapidio UHF 3DO Nozzle Camera LGX Lite SB 2209/2240 Remix of Stealthburner + KNOMI + 3DO Nozzle Camera + Rapido UHF by Baze & Stealthburner /LGX Lite/EBB 2209 by…

Downloads
312
Likes
36
Rating
0
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240

This is an updated version of the latest step files from BigTreeTech to fit the latest step files from Voron. The rest of the files needed to assembly the Voron Clockwork2 for the Voron Stealthburner can be found on the Voron Github and…

Downloads
305
Likes
21
Rating
5
P
PrintablesIxian
Downloads
279
Likes
30
Rating
5
P
Printablesnotheotherben

EBB 2209/2240 Clockwork 2 Cable Retainer (v1.1)

This CAN bus cable retention clip is a reworked version of the v1.1 retention clip from the official BigTreeTech GitHub. I created it after finding that the original version interfered with the USB-C port and my extruder cables in a…

Downloads
271
Likes
39
Rating
5
P
PrintablesChad Baker

Galileo 2 G2E EBB SB2209/SB2240 Cover 25x25x7mm_Fan (Updated to Release 1.0)

This is a mod of the cable cover to add a 25x25x7mm cooling fan to cool the toolhead board. GitHub Link Updated 2023/12/12 per comments to improve printing. Thank you @indi8six_1180574 & @jetcat_560589 Updated 2024/4/4 to comply with G2E…

Downloads
258
Likes
32
Rating
5
P
Printablesquietmesh

Crosman 2240 Picatinny rail

Use 2 M3x5 set screws to fasten. Includes two versions, one with the NEMESIS text as on picture and one with no text

Downloads
256
Likes
27
Rating
0
P
Printablesquietmesh

Crosman 2240 Picatinny for bipod or laser

Use two M3x10 Caphead screws and two nyloc nuts I had problems printing this with Arachne enabled and my 0.4 nozzle, the perimeters didn't fuse, so I had to use classic perimeter generator.

Downloads
247
Likes
35
Rating
5

Voron Cable Clamp Umbilical mod CANbus BTT 2240/2009

Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~5mm

Downloads
246
Likes
33
Rating
0
P
Printablesmccartbm90

EBB SB2240/2209 Vented Cable Door (Jan 2024 Update)

This is a vented version of the current BTT Cable Door for EBB SB2240. I could not find any other designs with the new version that are vented, plus I think the angled vents match the Voron aesthetic well. Original BTT files can be found…

Downloads
236
Likes
30
Rating
5
P
Printablesjeronbernal

SB2209 SB2240 PG7/CNLinko USB Strain Relief

same hardware as Nyx's linked below, CNLinko quick detach PG7 https://www.amazon.com/gp/product/B087MXNC7W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Downloads
233
Likes
34
Rating
0
P
PrintablesJohn Chatham

Stealthburner CPAP / Knomi 2 / SB2209 or SB2240 / 3DO Nozzle Cam / Rapido UHF

Really just adding Knomi 2 support to @seage's work and remixes. You will need to download the CPAP connector from Seage's model. Will need to download the Knomi 2 mounting plate from the Knomi 2 github repo: found here:…

Downloads
212
Likes
41
Rating
0
P
Printablespunjab

EBB 2209/2240 canbus cable bridge M12 gland direct mount

Fit M12 gland from aliexpress. Print thread down with organic supports

Downloads
195
Likes
22
Rating
5
P
PrintablesYuya

EBB SB2240 SB2209 V1.2 Cable Cover Fan

With the release of V1.2 of the EBB toolhead PCB, the included main body is no longer compatible with V1.0 or V1.1 modded cable covers. This is a simplistic V1.2 compatible cable cover for use with a 30x30x10 fan. Personally I'm running a…

Downloads
194
Likes
14
Rating
0
P
PrintablesTeah

Voron 2.4 A Drive SB2209/SB2240 can cable mount

I needed a simple cable route/mount for the included cable given with SB2209 and SB2240 kits. Just push the cable in and screw in just like the original design.

Downloads
193
Likes
24
Rating
0
P
PrintablesShortbus

SB2209/SB2240 - CW2 Cable Bridge, PG7 w/ Cutout for Can Cable

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount with a cutout for the cable/screw in portion. Make sure to route the…

Downloads
191
Likes
20
Rating
4.33
P
PrintablesZanna44

SB2209 / SB2240 Cable Cover Hex shaped ventilation

Perfect model to print for having a lower temperature near the SB2209 or SB2240 to make them last longer. It also has hexes!!!!! In the near future will be out a model that uses also a small fan to keep the electronics even more frosty!

Downloads
189
Likes
16
Rating
3
P
Printablesdeadlydayne

Voron Galileo PG7 mount for EBB2209/SB2240

This is for the Voron 2.4 with the BTT EBB 2240 and 2209 toolboards while using the Galileo 2 Extruder. I downloaded the PG7 holder by HartK and installed it when I installed my Galileo 2. Problem was that I could no longer home my…

Downloads
181
Likes
17
Rating
0
P
PrintablesHPFan

SB2209 SB2240 PG7/CNLinko USB Strain Relief

I just added a coutout hole in order to not have to disable the whole cable to remove it. The rigidity is good. I've been using it for more than a month now. Printed with Voron settings.

Downloads
172
Likes
19
Rating
0
P
PrintablesHornet331

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - Lower Switch FIX

In the original model the lower switch recess was slightly to shallow, the switch was standing out.

Downloads
172
Likes
16
Rating
5
P
Printablestidklaas

Galileo 2 SB2209/SB2240 CAN bus Umbilical Mount

Quick and dirty SB2209/2240 CAN bus umbilical mounting post for Galileo 2 Extruder. Use a M3x50 SHCS to mount the post instead of the cable chain holder, then fixate the umbilical with a zip tie. Print without support to keep the cavity…

Downloads
162
Likes
19
Rating
0
P
PrintablesJordanJ

SB2209/2240 LGX lite mount

I remixed the LGX lite mount because I felt the others are incorrect or just make things line up weird.

Downloads
157
Likes
8
Rating
0
P
PrintablesCompyNG

Stealthburner SB2209/SB2240 misalignment protector for G2E

The original SB2209 misalignment protector didn't work for me with G2E (using https://github.com/IRTrail/G2E-Filametrix ). The raised part next to the pins doesn't fit inside the opening the G2E body leaves. This version flattens the part…

Downloads
143
Likes
22
Rating
0
P
Printablesquietmesh

Crosman 2240 dovetail

Print it standing up, NOT as I did in my picture, that was just me being lazy so I could post a picture of it printed. -Stupid I know ;) Hardware needed: M3X3 Set screw - 2PCS

Downloads
143
Likes
10
Rating
0
P
Printableszr750

Crosman 1322-2240 single and triple picatinny mounts

Single side and triple picatinny mount for Crosman 1322 and 2240.

Downloads
143
Likes
16
Rating
0
P
PrintablesTom's Basement

EBB SB2240/2209 rear umbilical cable gland

Avoid tangling the umbilical cable with the Z chain ! This mod is intended to be used with this one : https://www.printables.com/fr/model/363657-voron-v24-trident-rear-umbilical Print the cable gland twice in TPU and use 3 zipties to keep…

Downloads
125
Likes
14
Rating
0
P
Printableswesson

crosman 2240 forehand

Printed with PETG with supports on the bottom. I put a ventilation slot on the bottom.

Downloads
125
Likes
11
Rating
0
P
PrintablesEchidnaEnigma

Cable Bridge for Stealthburner / LGX Lite / SB2209/2240

I wanted to use the wire strain relief instead of the gland ones, so I extended BTTs cable bridge to work with this stealthburner modification. Compatible with BTTs CANBUS cable clip with wire strain relief here:…

Downloads
124
Likes
6
Rating
0
P
Printablesdohmian

Stealthburner EBB 2240_2209 Cable Cover with 3007 Fan for Galileo Extruder

BTT modified the Stealthburner Cable Cover for use with their EBB 2240_2209 Board. My board gets 85°C hot when printing. Therefore I took the redesigned cover from BTT and the remixed version from Sven Kah and made a remix to fit the…

Downloads
120
Likes
12
Rating
5
P
Printablesjv

Stealthburner Cover / external fan SB2240/SB2209

-this is the deeper/wider version of the cover ~48mm deep (front to back if you're looking @ front of stealthburner) -I use freecad, I've included that file, the STEP file and the STL for anyone that wants to keep modifying -if you're…

Downloads
111
Likes
15
Rating
0
P
PrintablesToXIc

CAN Cable PG7 holder for Galileo2 BTT SB2240 Stealthburner

CAN Cable holder for a PG7 strain relief compatible for the Stealthburner toolhead with the Galileo2 extruder and Big Tree Tech SB2240 / SB2209

Downloads
110
Likes
17
Rating
5
P
PrintablesBaze

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 3DO PCB cable cover

I added the 3DO pcb holder to the latest files from BigTreeTech for the EBB SB2204/SB2240 Clockwork2 main body and pcb cover.

Downloads
110
Likes
12
Rating
5
P
Printablessmuk3d

Voron Clockwork2 BigTreeTech EBB SB2209 SB2240 Door Cover with Fan

my Brain Slug version works fine and EBB is around 36°C that really nice.. Fan is mounted with heat inserts for M2.5 and M2.5 screws with 8-12mm length Every time I look at it I think about this https://futurama.fandom.com/wiki/Brain_Slug

Downloads
107
Likes
17
Rating
5
P
PrintablesZachstuh

ASTM D2240 Hardness Specimen

A hardness specimen that is able to be used with the ASTM D2240 Hardness testing standard with a Shore D Durometer.

Downloads
106
Likes
6
Rating
0
P
PrintablesHanz2508

CW2 main body - ebb_sb2209/2240 with filament_sensor

Download the updated version below: Filament runout sensor for Stealthburner with EBB SB2209

Downloads
101
Likes
14
Rating
0
P
Printablesterrakuh

Stealthburner CW2 with ECAS and cat ears for EBB SB2240/2209

This design requires a different latch ( https://github.com/EtteGit/EnragedRabbitProject/blob/main/usermods/CW2_with_ECAS_and_optional_sensor/STL/%5Ba%5D_latch.stl ) and a different cover door like (…

Downloads
97
Likes
13
Rating
0
P
PrintablesAnton

Crosman 2240 custom wall mount

No supports, PLA is fine.

Downloads
96
Likes
7
Rating
0
P
PrintablesDead Encryption

SB-2240-KNOMI-CAM-LGXLITE

Remixed from aju3169's model to add standard hotend sizes. Also decided to go with the vent option, lol because it looks better. This will work with the kit / file that garteh.ky created. Updates* 080123 Simplified the Model to help with…

Downloads
94
Likes
11
Rating
0
P
Printablesdrago fire

LEGO PART 22407 Weapon Axe Head with Bar

you may need to sand the peg

Downloads
92
Likes
9
Rating
0
P
PrintablesHexus Smith

BTT EBB SB2240_2209 CAN Cable cover

Original model from BTT repo https://github.com/bigtreetech/EBB I have been looking for this design but have no luck. So i changed original , make some holes. Easy to print and completely fit with other parts. Print Settings Printer…

Downloads
84
Likes
6
Rating
0
P
PrintablesHadrik.

Filametrix Body (CW2) for SB2209/SB2240 with Dual Filament Sensors and ECAS - larger ball bearings

Modified to work with 6.3mm balls i got from an old bike bearing. The original description also says that it's not compatible with original hotend mounts, but that's what I'm using and it works so idk.

Downloads
70
Likes
7
Rating
0
P
Printablesharking

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716

Downloads
66
Likes
4
Rating
0
P
PrintablesJackel44

CW2_EBB_SB2240_PG7_Umbilical Mount with notch

Print according to Voron spec.

Downloads
65
Likes
2
Rating
0
P
PrintablesTraceParts

22400 Steel spur gears, module 1.5, milled toothing

More part numbers and CAD formats on www.traceparts.com/goto?Product=30-13122017-111782

Downloads
65
Likes
1
Rating
0
P
PrintablesHanz2508

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Updated - CW2 main body - ebb_sb2209/2240 with filament_sensor to reflect the lastest version.

Downloads
62
Likes
16
Rating
0
P
Printablesthall72

Lego Compatible (22407.dat) Minifig Axe Head Faceted with Bar 0.5L

This model is compatible with the lego system.

Downloads
59
Likes
12
Rating
0
P
Printablesmgetz

Barrel Stabilizer for Crosman 2240

Fits tightly around the barrel of a Crosman 2240. Keeps it stable so you can dial in your sights.

Downloads
57
Likes
14
Rating
0
P
PrintablesSaverio

Stealthburner EBB 2240_2209 Cable Cover with ventilation

When the Neopixel LEDs on the toolhead are on, the temperature of the EBB 2240 PCB rises to 85°C. For this reason, I modified the 'Cable cover EBB' model by BigTreeTech to allow the installation of a 2507 fan. My fan comes with M3 screws;…

Downloads
53
Likes
7
Rating
0
P
PrintablesShrek69

Cable holder for SB2209/2240

Cable holder for SB2209/2240

Downloads
52
Likes
5
Rating
0
P
PrintablesMaxEkb77
Downloads
28
Likes
3
Rating
0
P
PrintablesWilly Jay

Voron Stealth Burner EBB2240 PCB Support

This model will support the EBB 2240/2209 PCB when it is mounted in the Voron Stealth Burner. Use Voron Design Recommended Print Settings.

Downloads
21
Likes
1
Rating
0
P
PrintablesEliott JVN

BTT EBB2240-2209 Cable Cover - fan 25mm x 10mm

Hello everyone, I had some spare 25x10mm 4-pin fans from Bambulab, and I thought it was a shame to throw them away since they were still functional. With a bit of soldering and some reverse engineering, I managed to mount them on the…

Downloads
19
Likes
10
Rating
0
P
PrintablesBonsai

BigTreeTech SB2209 SB2240 PCB Fan with Swiss3DC Hotend

Swiss3DC hotends use dual heater with rather big connectors. To have enough space below the cover, the fan is moved a little bit

Downloads
15
Likes
0
Rating
0
P
PrintablesZoldemberg

Galileo2 EBB SB2209/2240 cable strain relief with Cable Chain Arm (Voron Trident)

This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…

Downloads
12
Likes
1
Rating
0
P
PrintablesSavidDanders

Voron Switchwire X-axis Umbilical SB2209/2240 PG7 Mounts

Modified parts from @stucamp on Github . PG7 gland mounts for the Voron Switchwire X-axis. To install I recommend using a de-pinning tool for the molex microfit connector. More info is in the original Github repo, but the umbilical will…

Downloads
12
Likes
7
Rating
0
P
PrintablesJeroenVermeulen

Marantz 74SD635 part 4822 403 70983 / 446T002240

Part of the Marantz 74 SD635 with 2 x cassette drawer. Also appears in Marantz 75 DC1010 and 75 DC1020 European part nr: 4822 403 70983 Part nr for USA/Japan/Far East: 446T002240 In the manual PDF: Part 117C, in the middle of page 17…

Downloads
8
Likes
1
Rating
0
P
Printablesjohn smith

lego crosman 2240

i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed

Downloads
3
Likes
0
Rating
0
P
PrintablesArnyjaa

Club Car Sepex-Motors (Teilenr. 102240102) Klemmbrett

Club Car Sepex-Motors (Teilenr. 102240102) Klemmbrett

Downloads
1
Likes
0
Rating
0
P
PrintablesJan schön

Wallmount for 42240 F1

This is a smal Wallmount for the 42440 F1 Brick-Set. I used 2 Hole to mount it.The car hangs nose up, and the tires are touchng the wall. V2 is a littlebit wider. i had to make V1, cause i already had the Holes in th Wall. I only used 2…

Downloads
1
Likes
0
Rating
0
P
Printables

lego crosman 2240

i love the 2240 and the 22XX family. so I made this for a large Minifigure I printed

P
Printables

Galileo2 EBB SB2209/2240 cable strain relief with Cable Chain Arm (Voron Trident)

This design bring you the capability for a Voron Trident with Galileo2 and EBB SB2209/2240 to have a chain mount and a relief connector for the CAN Cable. Printing information No need support but ... ABS or ABS-CF 5 walls & top/button 40%…

P
Printables

SB2209 / SB2240 - CW2 Cable Bridge, PG7

Different take on CANbus cable strain relief using PG7 Gland. Intended for newer BTT Toolhead boards with thicker connector. For those who want lower and centered mount. Although routing the cable is a bit finicky. Added cutout version,…

Crosman 2240 1377 Marauder Grips

Required Hardware (2) 6-32 x 1/2" Screws, (2) 6-32 Nuts (1) 8-32 x 2" Screw, (1) 8-32 Lock Nut, (2) 8-32 Flat Washer

Likes
8
Rating
0