Counting matching models…
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
Print approx. €3.98–€4.86 excl. taxPreliminary estimate for PETGSource material: PET
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
The legendary 2CV slightly reworked. Inside is a small Flat-4 engine. Parts are optimized for supportless ease print. Keep the orientation of the parts as shown on the picture! The whole model is bolted together with (17x) 3x15(16)mm.…
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Protect your board with this case
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
I designed this small component that serves to keep the contacts aligned for the exhausts of the model described. Again, the original would have cost too much. This component completes the model shown here…
Print approx. €1.06–€1.30 excl. taxPreliminary estimate for one variant
There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Replacement for broken and hard-to -use fan switch operator. Printed here in PET-G @ 0.3 layer height. Remove the front panel and un-snap the existing operator from the slide switch. Some small filing on the case will be needed to fit the…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Mango para cuadradillo de hierro de 2x2cm
Print approx. €3.01–€3.68 excl. taxPreliminary estimate for one variant
Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Motivation For Christmas I got a special present from my son: A 45x32cm photo printed on metal sheet by displate.com For mounting this poster, a 80x80mm magnet needs to be glued to the wall. The magnet then can hold the metal sheet paster…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
if you need a different size (Pot Lid outer diameter) write to me.
I wanted to have an "impossible passthrough" style model that is small so I can print one for everyone in a group, as a surprise present is sturdy works well has maximum possible detail for the size both parts should seem like a full size…
BigTreeTecg CanBus U2C board clip mount - Voron 2.4
Print with 3-4 perimeters for strength and use the orientation it imports in as no supports are needed. I’d recommend PETG, PCTG, or ABS since they are more flexible than PLA or ASA and more forgiving of tight tolerances. You may need to…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is a scale model of the Seeed Studio XIAO ESP32C3, an Arduino & CircuitPython capable RISC-V board with Wi-Fi, Bluetooth and USB-C that comes with an antenna and costs $4.99. The product page for this device can be…
This is a BTT U2C Mount for my DIN Rail Bracket. You can find the bracket here ! For the U2C you need M3 flat head screws and M3 Nuts. For the DIN Rail Bracket Mount you need M3 countersunk screws. If you like what I do feel free to buy…
Mount Mellow UTOC or U2C to DIN using this PCB DIN Clip . Attach mount to PCB DIN Clip with 2 M2 or M2.5 self tapping screws Attach UTOC or U2C to mount using 2 or 4 M3 x 6mm or 8mm
Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and…
If you like my models, please support me on Patreon (link in profile). your financial support will help me continue to help the defenders of Ukraine . thanks for the help everyone.
EDIT: 1/12/2026 - After printing the original file from @JakJak I found the tolerances on the dongle slot version were way too tight for my dongle. Maybe my printer isn't tuned and maybe the 2C controller dongle is a different size.…
Description Cute but practical dog food scoops to measure out an expected amount of food/kibble. Available in 3 sizes. Although visually similar to the earlier version (minus the handle changes), this version is completely redesigned from…
7 segment 3D printed 12-hour clock based on v3.0 mechanical counter. Uses three stepper motors with an Arduino Uno and a DS3231 RTC to maintain and display time. Uses some components from v3.0 while also introducing new parts specific to…
Stand supports both: 8Bitdo Ultimate 2C and XBOX Series Controller
My first attempt, which was oval race-track shaped with a very shallow 20 degree leading edge still managed to catch the PTFE tube. So, I modified the design to be more inspired by cow-catchers on the front of trains. I printed it in PETG…
Inspired by the 8BitDo Ultimate controller mounting clip, this clip is designed to add clearance to the front buttons...
Plate stand for decoration, can hold plates with diameters from 10cm up to 15cm. Use a 1.75mm filament as hinge. Print instructions Infill 50% or higher, no supports. Use 1.75mm filament as hinge.
A simple cube with 2cm length.
The box is made of 3 parts and the cover and carrier are universal for whatever base will be used. The base is specific designed to house an LD2410C sensor.
I made this model so I can mount a BTT u2C to my klipperized Anycubic Chiron. This will work with just about anything, though. I now have it installed on the Chiron, a modified VzBot, a ratrig Vcore 3.1, and a Voron 2.4. It uses 2 screws…
Case & Brackets (2020 Extrusion) for 16x2 1602 LCD Display Screen Blue + IIC I2C Module https://amzn.to/3LPVWNE
Mounting bracket for the BigTreeTech (BTT) U2C CANBUS Board for mounting on DIN rails. The bracket is attached to the Voron DIN Clip ( GitHub Link ) with 2x M2x10 self-tapping screws, while the board itself is attached with 4x M2x10…
Bigtreetech u2c mount for Voron Mounting bracket designed for mounting a Bigtreetech U2C to the frame. Suitable for various printers. Files contains two designs one in voron style and one blank design Required material per hinge: 4x Self…
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
Frame for 0.96-inch OLED display module. The bottom support at the sides ensures that the resistors do not stand out.
A planter for a 12 cm flower pot. (12 cm Übertopf)
Case for Arduino Uno + LCD16x2 with I2C Print instructions Unassociated tags: lcd 16x2 i2c Category: Electronics Summary Case for Arduino Uno + LCD16x2 with I2C Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
Although several designs exist, I wanted a minimalistic one, so I designed one myself Requires no additional hardware, LCD fits snuggly in the casing. Casing clicks together. Requires some supports for better result ( supports for the…
Kryt pro I2C displej 16x2: https://arduino-shop.cz/arduino/1570-iic-i2c-display-lcd-1602-16x2-znaku-lcd-modul-modry.html Print Settings Rafts: No Supports: No Resolution: 0,15mm Infill: 15% Filament: Prusa, DevilDesign PETG Post-Printing…
Bambu Lab H2 Series 4-Inch Exhaust Duct Adapter (H2D / H2S / H2C) This model is a custom exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…
Tested on SE. Fits KE. Updated V4 with spot to attach your Input Shape Sensor (WARNING: this mod is not meant for beginners. Nothing wrong with being one but you might be over your head with this one. I am an experienced Machinist and…
Make of bean holder for Philips printables does not allow non-commercial license org model thing:5401987
Name: Somebody School: TBA Hub: TBA Our Process blah, blah, blah Design Summary blah, blah, specifications, We added two pin-holes for accessing the internal reset button because there are differing models of the ESP32CAM board that have…
extended magazine for the p111 taurus
1602A / I2C LCD Display Module - 16 X 2 Text LCD - I2C CTRL Adaptor included Buy from Amazon here!
I used the great work form Kubol https://www.thingiverse.com/thing:2086578 to make a tutorial for the german Make Magazin where I put a ESP32-Cam into it and use the face recognition to make actions (like opening a door or just light up…
I designed this set of a replacement cover plate and a toilet cleaning tab holder because I didn't want to buy the overpriced and overengineered original version (roughly 50€) and also not any of the 3rd party clones (around 25€). I had…
Seeed Studio XIAO ESP32C3 2.4GHz Rod Antenna for XIAO ESP32C3
I remixed a modell for Xiaomi Mi Temperature and Humidity Monitor 2. And I designed a specific funnel for easier filling. HF!
2CR5 lithium battery replacement adapter for film cameras (for example Canon EOS 3, 5, 50). Designed for 17340 LiFePO4 3.2V rechargeable batteries or CR123 lithium batteries. 5mm wide contact strips:…
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
Deutsch: Die Idee für diesen Fräs-Jig kam mir, als ich dieses Video vom YouToube-Kanal “Gipfelholz” gesehen habe: Da ich keine Tischkreissäge habe, wollte ich das Teil statt dessen einfach drucken. Ich habe das Teil so konstruiert, dass…
Rugged case for the FNIRSI 2C23T oscilloscope. Holds both multimeter probes and the one probe it comes with for the oscilloscope (as well as the main unit). Uses six M3x20 screws. No supports needed.
I remixed the mount to fit perfectly to the Steinberg UR22C - Audio Interface
Vielen Dank an die Ersteller der Modellvorlagen, die Maße passten bei mir perfekt! https://www.printables.com/de/model/920133-segway-navimow-i105e-messerteller-fur-6-klingen-un…
=== BTT U2C Case === === Pictures === Recommended print material: PETG, ABS, ASA Hardware: x4 M3 30mm (can be two, like on the photos) x2 M3 8mm x2 heatinsert (Voron style or Od 4mm from Aliexpress) Changelog (day/month/year): 01.09.2024…
Citroën 2CV year 1973 Fiat 600 year 1961 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA
This is a case for a the M5Stack i2C Cardkb keyboard. Materials: Cardkb - https://shop.m5stack.com/products/cardkb-mini-keyboard-programmable-unit-v1-1-mega8a Silicone Cover - https://etsy.me/4dS4H8G PLA
Open Source Windgenerator Ø 62cm für Balkon, Boot oder Camping mit Drehzahlbegrenzung durch Fliehkraftregler Das Projekt ist noch in Arbeit und kann sich im Detail ändern Die Flügel diagonal auf dem Druckbett (mindest. 200 X 200mm)…
******************************** Update: I've added a cut out to mount an end stop as I personally need one and I like having the option available for others :) ********************************* This is a remix of Gulsifer's wonderful…
Update (15.06.23) - Now works with the Orbitor, you will need to print Orbitor Bottom Back Brace Orbitor Filament Sensor Orbitor Top Back Brace Orbitor EBB Mount Update - I have added an additional version of the base (withgantrybase),…
This model is compatible with the lego system.
Broken up into individual pieces for dual-color printing. I deleted the inner parts of the eye rather than painting them white but if you can do 3 colors, go for it! Grab the bowtie from the original here…
I added a hole in this great design, to drill on edges an rods. You can also use it to drill centered in 2cm wood. The rework has rounded edges everywhere. Print Settings Rafts: No Supports: No Resolution: 0,4 Infill: 20 Category: DIY
LEGO Citroen 2CV Charleston
Requires two bolts or screws to mount relay. Print two pieces. Possibly fits larger modules - I don't have any to check. 1ch relay module doesnt- have such mount holes
Format de l'objet par défaut 202x122 mm EP 2 mm Impression en deux couleurs et résolution progressive (Fichier joint)
Simple fit case for weapon holo (Holosun 510C and 512C)
This mounting plate is designed for a 128x64 OLED display prototype board. It was designed to fit the part on Amazon with the ID “B09T6SJBV5”. The Fusion 360 file has been included which should make it easier to work this into an existing…
What up nerds, here's a plate to add an optic to your sweet Taurus G2/G2C/PT111, etc… It dovetails into the stock rear sight mount, and uses the original screw to make sure it doesn't slide out on ya. I have the spacing for a cheap…
Basic Switchwire or Enderwire mount for a U2C. You will need 2 M5 10mm screws and t-nuts to mount this.. Then 4 M3 6mm (4 or 8 will work too) to mount the U2C to the mount.
Required parts: 1x Low-profile DIN rail clip 4x M3x5x4 brass insert (Voron BOM standard insert) 6x M3x6 button head screw (ISO 7380) Triangle symbol on the mount shows correct orientation with the clip. Print settings: 0.2mm layer height…
Mandala Schablone /Dot Painting Schablone um Muster auf einen Stein An alle Downloader, die keine BOTS sind: Über ein Make, ein Like oder einen Kommentar freue ich mich sehr! Auch (konstruktive) Kritik oder Erfahrungsaustausch ist…
Here is the legendary Citroën 2CV, you can hang it on your wall for a nice decoration ! I used a children's coloring to create that model.
Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…
CitroSupports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLAen type H Transporter year 1952
Summer inspired cookie cutter shaped like a crab 02cm - 10cm
Remix of the 8BitDo Ultimate IKEA Skadis Holder (DraftB) by JackSoldano on Thingiverse, https://www.thingiverse.com/thing:5926164, to fit the 8BitDo Ultimate 2C wireless controller. v2 now includes a cut out for the charging port and a…
Baby Foot Cookie Cutter 02cm - 10cm
I made this model looking at what others have made but adjusting to my needs, (didnt remix any other model in this, made all from scratch). I needed a strong and secure casing for my ESP32Cam with USB module, that would acomodate the…
Le modèle original est déjà très bien, j'ai juste ajouté le nid d'abeille sur les faces pour l'esthétique et l'économie de matière. Merci au créateur pour sa création (Effectuer une symétrie de la partie droite pour la partie gauche du…
Crown cookie cutter 02cm - 10cm
A wall mount holder for Ultimate 2C No supports needed!
Minimalist enclosure for the Seeed Xiao ESP32C3 with the mmWave sensor. If you want to replicate the electronics just foloow the below links with the instructions. To secure the mmWave sensor to the enclosure i just used two M1.6x4…
Print at 90degrees with supports. The USB hole must face upwards
A new 3D figurine generated by AI, a Citroën 2CV. My son painted it :-) Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Printed with Prusament PETG Jetblack 0.2mm supports are required.
If your filament is not retracting properly (the spool doesn’t rotate) and instead unwinds inside the Qidi Box instead of going back onto the spool — this model fixes that problem. This spacer reduces excessive pressure between the…
All holes are 3mm. Inspiration: https://www.printables.com/pl/model/199471-1602-lcd-screen-holder
Bambu Lab H2 Series Diagonal 4-Inch Exhaust Duct Adapter (4-Direction) This is a diagonal exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…
The ESP32CAM from Michal Fanta looks good, but it works with GoPro-Adapter. So I made a Adapter for the Articulation Camera-System in FreeCAD. Made with PETG: Orange Black Layer 0.2mm Infill 15% Geradlinig Support: Gitternetz (*) (*)…
Citroën 2CV, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
A simple, modern picture frame stand, with a low profile so that it is hardly noticeable. Fits 2cm thick picture frames and works for portrait or landscape orientation. Can also be used to stand up signs and other artwork. Can be printed…
Mounting Bracket for Bigtreetech U2C 2.1 can board, M3x8mm machine screws to attach board to bracket
This is a mount to attach the included screw mount to a flat bracket that allows cable ties to be threaded through to mount to a post or downpipe. Works perfectly alongside the solar panel mount . Requires two M4 x 10mm (approx) screw…
Found a base plate here on Thingiverse by this guy caledbwlch (you da man!) saved me hours of designing the base plate.
ESP32C6 .step .f3z
This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.
Hello all, This 3D Benchy model has been custom-colored using a 7-color scheme as a comprehensive test for the H2C or Prusa Core with Indx 3D printer. Each section of the iconic Benchy boat highlights a different color, allowing for clear…
