PAINTING ROTATING STAND - 608-2RS
I remixed the original model to use a 608-2RS bearing instead of the original 609
- Downloads
- 279
- Likes
- 72
- Rating
- 5
Counting matching models…
I remixed the original model to use a 608-2RS bearing instead of the original 609
Model of radial bearing type 608-2RS-C3 commonly used in part assemblies.
I've used 6201-2RS bearings for a lot of projects recently, and wanted to make a better 3D model to design around in Fusion360. This is the current result, it's not 100% accurate when it comes to the bearings internal geometry, but it was…
A pulley hub for F695-2RS bearings. The overall width is 9 mm. May need tiny amount of support on the bottom surface, but might not be necessary. Can print in whatever material you want, this part shouldn't be near any of the heat of a…
I did an e-steps and flow calibration before this. The orientation of all the parts I printed is how it is shown in the STL when you load it. It doesn't matter how you print it but here's how I did mine: Barrel and roller with normal…
needed for this spool rewinder https://www.printables.com/model/750033-donor-spool-holder-with-bearings-modular-design-fo its a Bearing 6200 2RS they work, just make sure to turn on random Z seams and have your first layer and stringing…
This is a zero clearance insert for Metabo C12RSH2S. Also marketed under Hikoki and Hitachi. The plate should also fit the respective predecessor C12RSH. The insert is 464mm along its length so do your math and download the file that fits…
A simple bearing dummy for help on your creation needs. Category: 3D Printer Accessories
This is a small model to test your printer calibration and tolerance for designs including the classic 608-zz and 608-2rs (22mm x 7mm x 8mm) ball bearings. The inner part can be snap/cut out to test rotation. With my mk3s+, prusament…
608-2RS To M4 Bearing Bushings print Settings: nozzle diameter: 0.20mm layer height: 0.20mm infill: solid walls support: NO walls: 3 top and bottom layers: 2 to 4 material: PLA Parts Needed: 608-2RS Bearings: https://tinyurl.com/2ctn43y3…
The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…
How to print Print the ports with the flat face down. You are going to need to rotate the model by 30 degrees to make it lay flat or use the ‘lay on face’ feature within your slicing software. You are going to need a small amount of…
Print solid with PETG, 0.1-0.16 layer height.
Radial Ball Bearing with correct measurements with full STEP files
This spool holder can mount to any printer with 2020 extrusion. (The fit was tested with LDO 2020 frame.) One side of the mount will stick out past the extrusion by about 9 mm because of the print orientation and size of the bearing. You…
simple mount for a 608 2rs bearing, uses m4 screws, and screws should sit flush. (since I am new to this please let me know if I made any mistakes, all feedback welcome)
Wall mounted Spool holder Requires x2 608-2RS bearings 2x Heat inserts and 2x M3 10 to 12 mm screws Ideal for any printer.
This is a remix of two prior SV06 filament sensor mounts designed to accommodate a larger ball bearing 8mm x 22mm x 7mm https://www.printables.com/model/384065-sovol-sv06-f688zz-filament-runout-sensor-mount…
my version of a spool roller, it needed to have some space so the spool did not rub against the lid of my drybox and would lower the standard spool height this Bearing…
Allows you to replace the stock PSU with the popular Mean Well LRS-350-12RS PSU for Prusa MK2 based printers.
I was needed 5:1 reduction— this quick design gave me that. Used 10x26x8 ball bearings to reduce friction. It is possible to stack stages to increase reduction. I had 7mm hex shaft so design uses that to connect input and output. I…
Remix of the original CSGO karambit for a 6703-2RS (23 x 17 x 4mm) bearing.
This remix is for anyone with leftover 625-2RS bearings from a Voron build. I took the stand and rollers from my dry box design and streamlined the base to be used without the container. (Of course, you could use the original without the…
A custom pulley designed to press-fit standard 6005 series ball bearings (specifically optimized for 6005-2RS / 6005-2RS-C3).
I had some 6204-2RS bearings that were disqualified for industrial use. Inspired by dkrnet’s Cereal Box Filament Spool Roller (using 608 bearings), I designed a roller base specifically for the 6204 bearings. I encountered some issues…
Cubierta antipolvo para Tamiya XV-02RS PRO, sustituye los soportes de batería y protectores laterales del modelo. Con tapa lo suficientemente amplia como para poder montar y desmontar la batería y trabajar sobre el modelo sin necesidad de…
keyrambit for 61802 = 6802 2RS BEARINGS Happy printing :)
You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…
Just a little thing to hang the TaiGaoLi 911 GT2RS flat on the wall. Mine is hanging there like 11 month and seems to be stable, even with its weight. Print the mount and 2 pins, they might have to be glued in. Designed to be printed…
For pattern: -top layers → 0 -bottom layers → 0 -outlines → 2 -infill → any (i use honeycomb) -infill density → 25/30%
This model works great for printing filament directly from dry boxes and is adjustable for larger filament spools (print the longer dovetail slide model for 1kg+ spools). Use superglue to lock in M / F frames after inserting bearings and…
Printable double shear stepper bottoms. I modified the Nebula stepper bottoms to friction fit a 608zz bearing. If your stepper shaft is long enough, it should slide right in and give you double shear. I also made adapters for F695-2RS…
I recommend printing this horizontal with supports to ensure higher strength on the 5mm shaft. PETG is my go to as PLA is weaker and might warp when drying fillament. ABS would probably work fine. Alternately, printing vertical should be…
This remix is for anyone with leftover 625-2RS bearings from a Voron build. I took the stand and rollers from my dry box design and streamlined the base to be used without the container. (Of course, you could use the original without the…
You can buy these airtight boxes on AliExpress: "3D Printer Filament DryBox Storage". I redesigned the holder for them because I really didn't like the standard one. A heavy TPU spool didn't want to rotate on it at all. I found cheap…
The Rubbermaid 21 cup container makes a convenient dry box for humidity-sensitive filaments. My design needs a single hole in the container for the bowden tube passthrough, and uses rubber washers to preserve the airtight seal. There is…
This spool holder can mount to any printer with 2020 extrusion. (The fit was tested with LDO 2020 frame.) One side of the mount will stick out past the extrusion by about 9 mm because of the print orientation and size of the bearing. You…
I was needed 5:1 reduction— this quick design gave me that. Used 10x26x8 ball bearings to reduce friction. It is possible to stack stages to increase reduction. I had 7mm hex shaft so design uses that to connect input and output. I…