Lego Compatible (73230.dat) Technic Brick 1 x 1 with Axlehole
This model is compatible with the lego system.
- Downloads
- 681
- Likes
- 52
- Rating
- 5
Counting matching models…
This model is compatible with the lego system.
Enclosure for LCD 1602 screen driven by a ESP32 DOIT DevKit v1 with a DS3232RTC I2C Real Time Clock module Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .2 Infill: 15 Filament: Prusament PLA PLA…
This model is compatible with the lego system.
I printed it on ordinary cr6 se with standard PLA. I have used 0.16 layer for better resolution of marks and numbers.
Schaltlehre für Polo 86c VAG 3153 - 5 Gang Getriebe VAG 3234 - 4 Gang Getriebe gedruckt mit Support ---------------------------------------------------- Gear Adjustment Tool for Polo 86c/ MK2 VAG 3153 - 5 Gear VAG 3234 - 4 Gear printed…
Simple mount for a DS3231 real time clock module. The module PCB attaches to the mount with M2 screws, and the external mounting tabs are sized for an M3 screw.
This model is compatible with the lego system.
These fit into my 2003 Toyota Celica trunk and hold up the "package tray". Passenger's side is provided. Flip to get the driver's side. Toyota Celica 2000-2005 Parcel Shelf Black Fixing Blocks / Package Tray Clips 64323-10040-CO Print…
I drew a quick housing for the mentioned temperature controller. It has super simple design, no screw holes. You should use hot glue to fix it onto fridge or whatever. Or design holes if you need. (Glue is strong enough tbh and don't…
Arduino DS3231 ZS042 AT24C32 IIC Module Precision RTC Real time Clock Memory mount. V4 has 2.75mm holes and V5 has 2mm holes Category: 3D Printing
Haz el llavero, atencion al flujo, en caso de que no te ruede, puedes aplicar una compensacion horizontal de -0.05 o -0.1 , es una buena prueba para saber como esta tu impresora. Si aplicas demasiada compensacion se cruzan los rodilos y…
This model is compatible with the lego system.
UPDATE: i got a new w3230 that actually does 500c an when i tried to put it in the lite case i had printed it would fit but the clips on the sides was so tight i ended up breaking the case so i made some changes to the model, have it…
This is a simple W3230 Thermostat mount for Prusa Enclosure. Example Thermostat: https://www.amazon.de/gp/product/B07RHDS2RN/
This model is compatible with the lego system.
Una caja simple con alojamiento para un termostato w3230 y un interruptor de corte. En mi casi el interruptor es para la iluminación LED del gabinete. Por la parte trasera tiene la salida para la sonda y alojamiento para 2 conectores…
Simple model for housing W3230 thermostat module.
This model is compatible with the lego system.
Gridfinity Klein Tool Screwdriver 32328 Could work with 323xx I think they all follow the same shape
A gridfinity bin for the Klein Tool Stubby screwdriver. 3x1x4 gridfinity bin
Suporte Base P/ All In One Positivo Union C1260 C1000 K3230
I've designed a 6x1 Gridfinity holder specifically for the Klein Tools 32305HD, which I believe is only available at Home Depot. Amazon might have a similar one (32313HD), but I'm not entirely sure if it will fit. I initially printed it…
This model is compatible with the lego system.
Print settings: Solid print - infill := 100% PETG The last picture shows my old clamping roll with i replaced Happy Printing :)!
these are replacement covers for the front speakers. These are known to break and are NLA from Mazda. The covers ARE different between the drivers and passengers side. also remember to print these in a high temp plastic like ABS, PETG, or…
Ive made a cap for the nut to the wiper arm on an Mazda 323 BA from 1998. May fit other models. Ive printed the model upside down with TPU, 15% infill.
Ikea Rast Drawer Stoppers Part 102323 replacement. I made this for when my ikea drawer stopper broke and it works like a charm.
a gear for a water softener 32 tooth Category: Replacement Parts
Zetina 6323 sewing machine replacement gear which changes modes. UPDATE 18.2.2024 After a great cooperation with sewing machine workshop in Slovakia and one of their clients, we made a better version with new measurements (thanks a lot to…
These models are replacements for Mazda part numbers: B093-50-645 (10 required for hatchback, 16 for 5 door) and B093-50-646 (4 required for hatch or 5 door) Despite being listed as available on most web sites, these are NLA thru Mazda.…
I needed a simple way to mount my W3230 Panel Mountable Temperature Controller for a project I was working on for my wife. She wanted a way to keep her sourdough starter at the perfect temperature (because happy starter = amazing bread!).…
Ikea Skådis holder for my good old Digitech QM1323 multimeter. Added two accessory mounts for exchangeable alligator clip tips. Mounting clip design is the same as https://www.thingiverse.com/thing:4958052
Print with supports for the pegs on the back
Summary: I use the W3230 thermostat to control my "enclosure heater". The probe is mounted in the center of the enclosure and the W3230 thermostat is connected to an external 24VDC power supply. You can find the thermostat on Amazon, Temu…
My version of Knob for Resprom RMS323 Potentiometer. РЕСПРОМ РМС323
a box to mount the W3230 you need: 4x m3 heat insert 4x m3x40 screw Pay attention to the size of the recess as the W3230 is available in different dimensions
This is the retaining clip for the rear drip moldings and replaces Mazda part number B092-50-525 which is NLA. I've tried printing this a few different ways, but FDM printing, even at a fine layer height just doesn't seem to get the…
Our Landroid WR092S needed a new battery pack, but either no one available or too expansive. Thats why Ive made a solution to exchange the WA3230 battery pack with a standard Power2Share battery 2Ah. Easy to change by cutting the old…
Cookie stamp Pi 3,14159265358979323846
This model is a simple pedestal for the 2023 Lego camera. It can be used with or without the Lego bracket and is available in two variants with slightly different beams, shown in the photos is the flat variant. I created this to remove…
Mazda 323 BF 4WD dash surround. I have not tested this print, so if it needs tweaks let me know.
Case for the 3 in 1 DS3231SN RTC module with LED display. Can be found on aliexpress.
3d scan of a 1988 Mazda 323 GTX engine bay. It's not a perfect scan, but likely good enough for general mockups
This is the bar in the steering column that cancels the turn signals after turning the steering wheel. These are prone to failure and are NLA from mazda. There are 2 versions. the first being a straight replacement. The second is for the…
replacement vents for the smaller defroster vents on the dashboard.
Hinge for french door fridge mullion flap. If you slammed your door a little too hard, like I did, and broke BOTH hinges, you can use this part to fix it. Just print with support and at least 50% infill. Samsung part # DA61-03230B…
For those Mazda 323 fans
Werkzeug zum öffnen der Uhr (Batteriewechsel) Batterie: SR920SW / V371 Empfohlene Druckeinstellungen Infill: 20% Infill Layerhöhe: 0,15mm Print instructions Infill: 20% Infill Layerhöhe: 0,15mm
Replacement for the center cap for a stock 323 GTX wheel. I've also included a form for making a new wire clip as well. The stock wire is .065 inches in diameter and the ends are held together with an electrical butt join splice.
Shifter bushings for BF Mazda 323 GTX
Gehäuse für das W3230 Thermostat. Der Deckel wird mit zwei M4 Schrauben fixiert. Unten ist ein M16 Gewinde für eine Kabelverschraubung
Tired of having your Lego Technic bent beams to take an awfull lot of space? Tired of having to sort them out each time you need a specific one? Tired of kids always mixing them up in the same bin, messing-up with your beautiful…
block off plates for the exhaust ports for a BP and BPT 1.8L Mazda engines. I've split the model into two pieces that even smaller printers should be able to handle.
If the gear display label of your car is broken like my father's car, you can use this model
Volvo Penta Fitting 23238467 3883597 + key Material: ABS Infill density 100 %
Gridfinity bin for Klein tweaker screwdriver model 32314
The lid snaps in, just screws for mounting the electronics required.
A temperature control bracket for mounting on the side of a 3030 aluminum profile (the cables are routed up or down the profile without pinching anything). -------------------------------- Eine Halterung für Temperatur Steuerung zur…
Gurtführung Säulenverkleidung ( B Säule ) Passat 32b / 33b / Quantum / Santana OEM 323 867 329 Links OEM 323 867 330 Rechts
replacement large defrost grills that mount in the dash board.
print solid from semi-flexible material.
3d scans of GTAE bumper grill inserts. For the left and middle inserts, you can mirror them in the slicer to get the insert for the opposite side of the bumper. there are 3 different unique inserts. I'll add more as I get them scanned, so…
Soporte para colgar los difusores de pelo. el diametro interior es de 59, aprox todos son parecidos, en todo caso medirlo y aplicar la escala si fuera otro diametro. esta laminado con ideamaker con la funcion de textura Print Settings…
replacement trim for the interior door lock knob. As this part will be subjected to lots of sun exposure I highly recommend resin printing, but if you need to print on an FDM use a high temp plastic such as ABS, PETG, or ASA.
A Gridfinity bin for the Klein Tool 32304 14-in-1 HVAC screwdriver. 4x1x3 Gridfinity bin
this is a complete replacement for the manual sunroof crank assembly. It is NOT intended to be mixed-and-matched with any OEM components other than the metal brace pictured. These files include everything you'll need to replace the…
Housing panel thermostat W3230 with SSR module .
Necesitas marcar unos cortes, poner unos pomos, que te queden a distancia, con este sencillo marcador puedes hacerlo muy facil.
Habe für meinen Passat 32b Variant ( 33b ) die Führung der Türverriegelung nirgends zum bestellen gefunden und kurzerhand selbst erstellt und gedruckt.
This is a speaker mount I made for the very common Z323 speaker set. Posting it as other people might find it useful also. Even if you don't have the exact same setup you could use this as a starting point and modify to meat your needs.…
decretive clip that covers the mounting screws on the front cowl.
English : For my workbench, I wanted to install my Logitech Z323 speakers so I wouldn’t take up too much space. So I created this small shelf to put the speaker horizontally, fixed by 4 wood screws of 4*15mm (2 can be enough). To print…
Adapter replaces two of the factory blank spots. I used the switches from the amazon link. https://www.amazon.com/dp/B00S4J4U7S?ref=ppx_yo2ov_dt_b_fed_asin_title
Block off plates for the water pump inlet and outlet for BP 1.8L Mazda engines. May work on 1.6L engines as well, but I have not test fit them on one.
I wanted a stand alone chamber heater to add to my printers that did not require drilling holes for bolts or screws. I used a cheap amazon 120v 200 watt heater, 10 x 2 magnets, a W3230 120v temp controller, a lighted 120v rocker switch…
Standard print settings, some foodsafe filament.
Habe hier ein Ersatzteil zum "einkleben" erstellt. OEM 323 857 083 Originaltext nach Ersatzteilkatalog : Blende für Schalter Fahrzeuge: Passat b2 - 32b - 33b - Santana
I printed in PETG, 3 layers wall, 40% infill.
Print using ABS or PETG.
Lets be real guys, that car on jack stands isn't going anywhere for a while, so why not make sure to keep debris out of your head while the intake is off. Sure you could shove paper towels in there and forget about them after you put the…
tabs broken off your AC button and now it just wiggles around in your dash? Not a problem, this little bracket will hold it tight for a nice clean OEM look. After you print the part, the hole gets tapped for a 4-40 or 4-48 set screw, then…
harness clips used to secure the rear harness into the chassis. Likely used in other late 80's and early 90's Mazda's as well. These print without supports, but I suggest printing them solid from ABS. The clips are intentionally hard to…
Hobbyists and makers frequently use a real-time clock module in their designs. One very common board is a DS3231 mounted on a board with a coin-cell holder, EEPROM, and the necessary resistors/power LEDs. I found myself in a situation…
This is a simple Rotary Guide that fits the $10 Harbor Freight Drill Master (63235). It was designed for people doing extruded polystyrene carving... aka Tombstone carving. Hardware: (Qty 1) M5 x 16mm Cap Screw (Button Head Cap / Phillips…
replacement for Mazda part number HA1650754. Print from something semi-flexible. The tabs flex quite a bit to install them.
A magnetic mount for my phone, designed with the Iphone 13 mini in mind. This is the magnet I used https://amzn.to/3MzE I have also uploaded a file that allows you to use a magsafe charger with this design so that your phone doesn't die.
For a project I am working on I needed to adapt a Reolink Camera (RLC-810A) so that it could be placed on a tripod. I believe this design should work with any B9/B10/B16 drilling pattern camera, such as the RLC-510WA. No supports needed.
LCD Display holder for Mazda 323F with sunroof. Was developed for install display 3in1 (Voltmeter, Thermometer, Clock) very popular on Aliexpress. Use ASA or ABS, because is not gonna melt in the summer. Use suports for printing.
Print solid from semi flexible material
Most of these pieces are NLA or have a long lead time from Mazda. all the bushings are quite straightforward. Print solid from a heat resistant plastic like ABS or PETG. Bushing 2 there are 2 variants, one with threads and one without.…
replacements for Mazda part numbers BF6751587 and BF6751597. These should be printed from something semi-flexible as the mounting tabs are a bit thin. I'd suggest SLS printing from Nylon. Design updated 3/20/2026 for better fitment!
replacement for NLA mazda part number BF6751580. Note 1: this requires you to re-use your existing lens which is plastic welded to the original cover. Note 2: I have NOT printed this out and test fit a lens in it, so please let me know if…
Tope para sillas de oficina, o gaming, se suelen bajar solas, el diametro interior es 28 mm, normalmente son todas iguales, la altura son 91 mm al tope, en caso de otras medidas, debes escalar la pieza. Print Settings Printer: Two trees…
Replacement Grip for Klein Tools screw drive 32314 To install, soak in boiling water for 1 minute, and install while soft
Replacement drink holder for Beneteau 323. ASA filament recommended.
kit to repair filter for vacuum cleaner CZ: Kit na opravu filtru vysaveče
Looking for a complete set of alphabet and symbol STL files? ✨ You’re in the right place! These fonts are free to use from fonts.google.com , but I’ve already done the work of converting them into ready to print STL files, all from 149…