144 models
A quick update on my models. Firstly, I found out the hard way that I should make my kit cards at the scale they're being printed at, (Originally, I would make them and then scale them down by 25% in Prusa Slicer). So that's now fixed,…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for one variant
Precise Slug for Umarex t4e HDR50 This is my design on slug that I have tried on my TR50. Remove support after print is finish like on images! Then simply place the 8mm ball on top and with a little pressure it will click into position.…
Print approx. €0.10–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
Object: combclip for dishwasher Bosch SMV68MX04E. It should works also for rest Bosh dishwasher. Notice: all detail informations, especially supports, you can easy find in 3mf file with project (open as project in slic3r). Printed on…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
In my opinion all the vesa adapters that I could find to print were either too flimsy, kept the display too far out or too low
Print approx. €10.04–€12.27 excl. taxPreliminary estimate for one variant
I like the holder, I like the stability feet, I just used the same concept to add a box to hold some tools. A very small box, but big enough to hold tweezers, steel brush, sceaning sponge and even some nozzles. Print instructions -Gyroid…
Print approx. €4.15–€5.07 excl. taxPreliminary estimate for PETGSource material: PET
This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…
Originally published here: Samsung Galaxy A02 & A12 & F12 & M02 & M12 case by tato_713 - Thingiverse This case was designed for the phone Samsun Galaxy A12, but by its size, shape and button places, its compatible with the A02, A04e, A12…
Universal PUNCH BUTTON & CO2 Cylinder Opener/Tightener for Umarex T4E HDR/TR50, HDR/TR68, HDP/TP50 & HDS/TS68 - Cal.50 & Cal.68 airguns. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 0.15mm…
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
holster for the hdr 50 umarex revolver
Disclaimer : This design is intended for use with Airsoft Guns ONLY and NOT for real firearms. Safety Note : Always wear appropriate protective gear, including eye protection, when using airsoft weapons to prevent injuries. Use Caution :…
EDIT 19/05/2024 - Added a new version of the X carriage which is much more compact (and thus better CG location) BUT limits slightly the print volume on the x-axis ( +5 mm max on each side of the X carriage lost compared to the previous…
Smaller Version Cal 50 with 4,5mm Steel Bullet For Umarex HDR 50 Home Defence Revolver T4E
I saw Z123456789's clamp for 2020 Profiles and it inspired me to make one for the 4040 profiles i'm using on a project. I recommend printing with 100% infill for stability. The first time twisting it in is quite hard but that way it's a…
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
Remixed to fit MC4EX connector, which is slightly smaller than a regular MC4. Take a look at the pics to see an example. I recommend printing in Nylon or PETG. I also added a hole so you can put a key ring on it, and clip to a carabiner…
Umarex T4E 68 bullet for 12mm sphere
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Umarex T4E 68 bullet for 8mm sphere
Simple case for MP1584EN DC-DC step down Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through a small donation. The…
It adds space for the co2 cartridge plus a bullet storage, so that the cartridge does not fall out, it is necessary to stick foam on the inside as in the photo
Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.
A simple , easy to print macro diffuser designed for a MeiKe MK-14EXT ring flash. Print instructions: The “diffuser_white” part should be printed with white mate filament in “ Λ” orientation , “difuser_black” in black or grey in “V”…
Sherman tank track type: T54E1 !!!!!!!!!! like and follow !!!!!!!!!!!!!
This diffuser clips on to the front of your Canon MT-24EX flashheads and provides a large, evenly illuminated 175x120mm rectangular front face (~7x5 inches). The shape of the face has been chosen so that the MT-24EX's natural beam pattern…
This is a clip-together case for common, postage-stamp sized buck converters. The original part # for the DC-DC buck converter used is MP1584EN. The case can be printed at low infill/quality, as you see fit.
here is a Pouch for 5 HDR 50 cylinders. that can be mounted on the molle system. to load it slide the top open. place the 5 cylinder in there. and make sure they don't flip over. than you can close the lid. and your ready. this van be…
This model is a remix of popular model of bierkisten-tray from CAD-Guy I reduced the tray to 4 to require less floor space This remix is completely compatible with the original stackable beer crate.
Breville 54mm portafilter holder for DF64 / DF64E / DF64P grinder. The height of the portafilter as measured from top of the portafilter ears to the bottom must match up otherwise the portafilter won't sit in place. I've this one…
F-4E Phantom II General purpose, extra large, carrier-based fighter. Though turning performance can be a bit problematic because of the large size of the aircraft, it boasts top class speed performance among the older generation model…
The F4E naval fighter jet. I made this to be printed pretty small, so it's not very detailed. Print Settings Printer Brand: Creality Printer: Ender-3 V3 SE Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 20% Notes: Print vertically with…
These exploration tokens are very thin and should be quick prints. I recommend printing with 0.4mm nozzle, 0.2mm layer height, and swap colors at 1.2mm. Cultural: Blue Hazardous: Red Industrial: Green Add them to planets at the start of…
Low profile bracket for LSI 9212-4i4e SAS HBA adapted from https://www.printables.com/model/244218-pci-low-profile-brac
May work for other 58mm gear but I haven't tested any
Opening Tool to maintain or replace the O-Rings in the PPQ M2 T4E Magazine. You need two M2x16 screws and a PH2 bit (optional). Just screw in the screws from the bottom until they stick out about 1mm. The PH2 bit on the side should hold…
My take on the Atropal is unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.
This model contains three variants of the rack mounting ears for the Zyxel GS1900-24E. First is the original, which matches the metal ears provided by Zyxel, and is likely too flimsy for 3D printing in plastic. There is a reinforced…
Ich habe lediglich das Regalfach zusammengesetzt und auf 4 bzw. 5 erweitert. Die 5er Version lege ich hier ebenfalls ab, allerdings wird dafür mehr als 1Kg Filament benötigt, was es doch nicht so ganz praktisch macht. Für das 4er Teil…
Il est pas évident pour tout ceux qui utilisent les armes de défense Umarex T4E Gen 2 de pouvoir serrer correctement le percuteur de cartouche de CO2 alors j'ai fait cette clé de serrage. PETG, couche 0,2.
The 44E 402 hall-effect probe is widely available mounted to a PCB with an LED and a pin connector. I wanted to enclose it, so here's a simple case.
This is a wall mount for the HP's 24es screen I have designed to free up some space on my desk. It uses the native locking mechanism of the screen, hence no further modification is needed. Print Settings Printer Brand: Prusa Printer:…
Das gute stück braucht 4 Haken und ist auch auf einem 245mm Drucker möglich wenn man es um 45Grad dreht. Problemlos gleichzeitig, ohne Stützstruktur und mit 0,2mm Layerhöhe druckbar. Viel Spaß damit :)
I work for a K12 school as a computer tech and the original hinge covers get lost all the time because of the backplate breaking off the hinge. The parts supplier we use wants $20 for a pair of replacements. So I modeled and printed some…
Updates: 2024-12-19 Orbiter 2 compatibility tested. Plate uploaded. PTFE length cca. 33.5mm between the orbiter and the V6 Volcano full metal heatbreak. CR-touch offset: x -33 y 0 E3D V6 Revo hotend compatibility tested with success.…
Hier ist ein simpler Festplatten Halter. Er bietet Platz für 4 Festplatten. Es handelt sich um 2,5" "WD My Passport" USB HDD. Gedruckt mit 0.4er Düse, keine Supports oder Brim notwendig. Ein einzelnes Modul zur Erweiterung liegt auch bei.…
Strong Mini Case for DC Buck Converter eBoot MP1584EN Made stronger where screws are; cleaned up top and bottom surfaces (they were not flat previously)
I wanted to design a double barrel mount for use on a TR50 T4E, HDR50 on the right side, inspired by the ARTENGINE model. Printed in PETG CF, 0.2mm layer, no support, 1mm skirt. You will need to break off the central part (green piece in…
I couldn't find any cases for this device online. The case consists of 3 quick-assembly parts. The case provides the ability to connect additional modules to the load. Just remove the 0.6 mm thick walls in the right places. The case…
Juste un simple boitier pour les abaisseurs de tension MP1584EN. J'en avais besoin pour sécuriser le module dans ma CR10S-PRO lors du remplacement des ventilateurs trop bruyants. Je l'ai collé dans le boitier au double face. En espérant…
Tricycle Mini (4e of 5 models) Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA Note: Trim can without support!
Adding a wireless charger and signal booster 5NA 980 611 to the compartment under the armrest.
benötigte Schrauben: -4x Senkkopf M3x10 -2x Linsen M2x14 -1x Linsen M2x8
EN Update: v2 has changed the design, and now it has toolless exchange of front lable and the top labels are doblesided. So it is much more practical. Feel free to download and comment what we shold make better. If you likes it, we will…
I had a few requirements for what I would consider the "perfect organizer" for myself. Having not found the exact mix of what I was looking for on any free files, I ended up repurposing some components I had printed for my TI4+POK…
light switch case with MP1584EN DC-DC case, AIO Category: 3D Printing
Voici un lithophane du vitrail de Zelda Windwaker. 4e modèle. Faites vous plaisir ! This is a lithophane from Zelda Windwaker’s stained glass window. 4th model. Enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
This is an own-created collection of updates for a YK41012 crawler (brushless version) At least some parts should be compatible with similar models from Yikong. Absima calls a similar model CR4.4eco or CR3.4eco How I Designed This…
Einfacher aber praktische Halter für deine Gewürze. Platz für 4 oder 6 verschiedene Gewürzgläser. 45mm Durchmesser, fast für jedes Gewürzglas passend. Gesamtbreite + Tiefe 4er: 190mm, 52,5mm Gesamtbreite + Tiefe 6er: 285mm, 52,5mm 2.-3…
Converted Captain Ahab 's fine model into a kit. This is my first model kit. I'm not sure what the final scale is -- I basically made it as large as I could within the confines of my bed. The most interesting design hurdle was figuring…
Pause printing at 8mm height and insert standard m5 nut, continue printing...
Voici un upgrade indispensable pour votre lanceur Umarex T4E équipé du système de percussion rapide ( Quick Piercing ). J'ai conçu ce bouton texturé pour coiffer le bouton d'origine. Il offre une surface d'appui nettement plus large et un…
A oil funnel for the 4E/5E platform. easy to use. I have printed mine in PETG
This case allows you to assemble with 1 or 2 Ø10mm magnets (1~3mm high). Print Settings Rafts: No Supports: No Category: Tool Holders & Boxes
Replace the large button for opening the trunk with a smaller one from the version with a camera 4E0827565D, next it is necessary to adjust the microswitch connector and solder it to the wires so that it can pass through the original…
Axle seal driver for a 2012 Subaru Forester. 4EAT Automatic transmission. Not sure if it would work on Manual but I assume due to the diff location. May also be compatible with the outback or other foresters (not 100% sure, check your…
Switch Sonoff EU wall mount 86mm x 86mm x 5mm for old recessed electrical box like this : Print Settings : Supports: No Resolution: 0.2 mm Infill: 20% ------ Happy Print to the whole community :)
This mounting system attaches the twin flash heads of the Canon MT-24EX macro flash to your lens' tripod collar using 1/2" Loc-Line tubing to form the arms. This allows a connection that is rigid enough that it'll stay exactly where you…
Muldeneinsätze für Werkstattschubladen, Kompatibel mit originalen Lista Mulden
Holder for OZ 444E Collet. Print Settings 0.2 mm layer height 2 perimeters 15% cubic infill 5 Top and 4 Bottom layers
This is a replacement shell for the LiftMaster TX2/4EV remote, designed to work with the original rubber buttons and screw. Two versions are available: a solid model and one with a small cutout for viewing the LED indicator. For the…
-Halter für Walther PPQ Ram Waffe
Nissan Terrano KA24E intake manifold adapter for weber 32/34 style carburettor - don't ask me why, here is the model Carb used - fiat 125p / fso polonez / zuk licensed weber 32/34 Print it with 100% infill, preferably with petg or some…
This big diffuser combines both your MT-24EX flash-heads together to make one single light-source, and allows you to freely position it by joining it to your camera with one or two adjustable ½" Loc-Line arms. For the corresponding…
I was switching out my Ender 3's buck converter with a more efficient model and made this case for it, to help make sure nothing gets shorted out. I printed mine out of PETG, but PLA should work just fine as well. I used a generous dab of…
EN Dear makers and forestry workers, I couldn’t find any high-contrast sharpening grid, so I designed one. This grid is enhanced with guide marks to check equal chain tooth length, so the saw cuts straight. It also includes a hook – you…
"Hydrant For Electric Vehicles (H4EV) - 3D Print Model" in STL format is on its second version, and it is based on the book "Hydrant For Electric Vehicles - The Original Novel by Alex Alves" - ISBN: 9781446695777 (https://h4ev.cc) In the…
Ring holder with hearts for wall mounting with small poster Command Strips. Includes version with smooth back. Edit: Added reinforced angle versions.
A keychain with a wireframe of an F-4E and the text "F-4 Phantom II" on the front, as well as "I See Ghosts" on the back
This is a quick remix of a buck converter mount that lets you mount a buck converter to a 4028 fan
I broke the stand and the microphone arm mount, so I decided to design a stand for the Maono A04E. I also wanted to get rid of the USB-B port because it's possible to solder the USB cable directly onto the microphone's PCB. I'm not a 3D…
Nothing to it really. Print it open side up with supports for the legs. I like tree support.
Print the part 4 times and join it to a square. Not easy ;) Category: Puzzles
A special something to tell the person with you're apartment key, that it's more than a commitment, it's going to be 4 Ever.
A simple holder for the LiftMaster TX2/4EV remote. that I made with the intention to mount with doublesided taped in my car but still being able to change the remote batteries. I printed with the settings: 0.2mm layers 3 wall loops, 3…
for those who think Christmas comes to early
DYOR (Do your oun robot) es un proyecto organizado por la Universitat Politècnica de València (UPV) con el propósito de ser implementado como una actividad dentro del currículum de Secundaria, Formación Profesional y talleres de robótica,…
A basic case for the eBoot Mini MP1584EN DC to DC buck converter. Top and bottom models friction fit together, and there are holes for the input and output wires. It may be appropriate to add a bit of hot glue on the holes once wires are…
raised i love you 4ever & always on 2 hearts, one upside down
This is a replica of figure E from the box "Hirelings", number 2004 from Grenadier (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:G-asfs-2004e.jpg&oldid=210424 ) "Potion Drinker". Reproduced using…
Looking at the different chute designs that are available, I decided to attempt at recreating close to the original D64E/D chute by fusing two different models together. Original credits go to both DF64E Non-Plugging Chute by Nome2024 and…
I had a tp-link Archer T4E kicking around that had a half-height bracket, and I wanted to put it in a normal desktop case that uses normal full-height expansion cards, so I whipped this up. Factory screws from the wifi card just screw…
Antenna holder for custom box Xiaomi Mi Router 3/3G/4 etc . Use flat head countersunk screw for fastening to the body Category: Electronics
Minimalist 4-cigarette box with standard BIC sliding lid. Compact emergency box for car, work, and on the go. Fast, material-saving 3D printing. Description: This minimalist 4-cigarette box was designed for users who consciously…
Over the course of 1.5 semesters , our team modeled the entire University of Utah campus using Blender, Google Maps, and OpenStreetMap data, then brought it to life on a Modix BIG-120X large-format printer. The final result took 233 hours…
I was going to find a good bearing for bed tilt for my voron 0 and found this small spherical bearing called GE4E Everything was made according to the true dimensions of the bearing and modeled in onshape.
A Fan Holder, mating the excellent MK3 RHD Fan Duct Rev. C by RH_Dreambox to the Original Prusa MK2.4 Extruder design by MattsHub. got the dimensions almost right, the bottom 'pillar' needs about 3 0.5 mm washers. might fix this in the…
![Twist In Cable Clamp [4040 Aluminium Profile, 4ELP]](https://media.printables.com/media/prints/483422/images/3949249_d531a43f-1052-4bb0-babe-d0c0bf2d07d2/03a8325ee0ed7d7949df26783a382aa4_display_large_483422.jpg)
